The Edimax BR-6675n D i Q router provides simultaneous 2.4 G Hz & 5 G Hz wireless network connectivity for maximum flexibility of use. This router allows users to use general network applications like web surfing via the 2.4 G Hz bandwidth & stream HD video & other media through the 5 G Hz bandwidth at the same time. in addition, the BR-6675n D i Q router features 1 gigabit WAN port & 4 gigabit LAN ports, offering users with the need for maximum network performance data rates of up to a staggering 1000 Mbps. With gigabit Ethernet connectivity, the BR-6675n D can provide users a fast & smooth media streaming or network gaming experience. Simultaneous dual-band wireless connectivity (2.4 G Hz & 5 G Hz) 1 gigabit WAN port & 4 gigabit LAN ports Complies with wireless 802.11n & 802.11a/b/g standards Wireless speed up to 14 times faster & coverage 6 times further Features i Qo S for quick & easy bandwidth management Built-in slide switch to enable/disable wireless signal Supports WMM, WEP, WPA, WPA2, DDNS, Qo S, IP/MAC filter, DMZ, & virtual server Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Edimax MG-1000AMA 1000 Base-SX mini GBIC/SFP Multimode 850nm 500m LC Key Features Industry standard SFP package Single 3.3V power supply Simplex/ Duplex LC connector Up to 1.25G b/s bi-directional data links Die cast metal housing for Low EMI Wavelength = 850nm Media = MMF Pout (d Bm) = -4 ~ -9.5 Sensitivity = -18 d Bm Pwr Budget = 8.5 d B Distance = 550m Application = 1000 Base-SX Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Key Features Complies with the IEEE 802.3 & IEEE 802.3u standards Provides Store-&-Forward architecture Ultra small footprint (111x 68x 25mm) Supports Auto-MDI/MDI-X, full/half duplex modes & auto-negotiation Supports flow control & Non-blocking architecture 200 Mbps Full Duplex Transmission Edimax ES-3205P is a high speed fast Ethernet switch for home & small business. ES-3205P not only complies with IEEE 802.3/802.3u 10/100 Mbps Ethernet standard but also supports full duplex transmission. The full duplex feature can double the network throughput on every port. It is used for high speed server or switch-to-switch connections. The maximum throughput of every port can reach up to 200 Mbps Supports Wire-speed & Flow Control The ES-3205P built-in non-blocking & store-&-forward architecture feature your network with full-wire speed connections. It accommodates with flow control for full duplex mode & back pressure for half-duplex mode which ensure reliable data transfer & help to prevent data lost. Use ES-3205P to create a high-speeds network & benefit from its ultimate performance & reliability Supports Auto-MDI/MDI-X & Auto Sensing ES-3205P supports Pn P (plug & play) installation & auto-MDI/MDI-X function. You can connect ES-3205P with computers or Ethernet devices without any configuration. You also can use either straight-through or cross-over Ethernet cable & combine 10 & 100 Mbps devices into ES-3205P. The switch will automatically detect the right cable & speed for your device. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Best media conversion solutions for network connectivity. Edimaxs full series of Media Converter are designed to meet the needs for massive optical fibre network, provide the whole Ethernet / Fast Ethernet network implementation Key Features Compliant with IEEE 802.3 10 Base T & IEEE 802.3u 100 Base TX/100 Base FX One 10/100 Base TX Ethernet TP Port & One 100 Base FX Ethernet Fibre Port TP Port can support Half/ Full-Duplex, Auto-MDI/MDI-X & Auto-Negotiation Providing a slide switch for Full- & Half-Duplex selection on FX Port Multiple Fiber Connectors Migrating between copper & fibre-based Medium ET-912+ series convert the signals between two different transmission medium, allowing user a simple & cost-effective method to migrate between UTP cable & fibre optic cable. It can transmit signals up to 2km (multimode) & 30/40/60/80/100km (single-mode) in fibre medium, allowing users to extend network Comply with IEEE Standards ET-912+ series are fully compliant with IEEE 802.3 10 Base-T & 802.3u 100 Base-TX, 100 Base-FX standards. The device comes with one RJ-45 port to connect to a 10/100 Base-TX device such as workstation or switch & one fibre connection to connect a 100 Base-FX device Built in Switching ASIC ET-912+ series have turned the function more like a 2 ports switch than a traditional converter. User can get all switching benefits such as frames checking & filtering Feature LED & Fibre link alarm User could monitor the device through Feature LED. In addition, Fibre Link Alarm could allow user to monitor & maintain their critical fibre link more effectively Unique voltage supervisor Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fibre port & TP port work normally when thunder storm or power unstable occurring cause the power electricity suddenly down in an instant time Plug-&-Play Installation Simply to plug the TP & fibre port to the device having the media convertibility. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Best media conversion solutions for network connectivity. Edimaxs full series of Media Converter are designed to meet the needs for massive optical fibre network, provide the whole Ethernet / Fast Ethernet network implementation Key Features Compliant with IEEE 802.3 10 Base T & IEEE 802.3u 100 Base TX/100 Base FX One 10/100 Base TX Ethernet TP Port & One 100 Base FX Ethernet Fibre Port TP Port can support Half/ Full-Duplex, Auto-MDI/MDI-X & Auto-Negotiation Providing a slide switch for Full- & Half-Duplex selection on FX Port Multiple Fiber Connectors Migrating between copper & fibre-based Medium ET-912+ series convert the signals between two different transmission medium, allowing user a simple & cost-effective method to migrate between UTP cable & fibre optic cable. It can transmit signals up to 2km (multimode) & 30/40/60/80/100km (single-mode) in fibre medium, allowing users to extend network. Comply with IEEE Standards ET-912+ series are fully compliant with IEEE 802.3 10 Base-T & 802.3u 100 Base-TX, 100 Base-FX standards. The device comes with one RJ-45 port to connect to a 10/100 Base-TX device such as workstation or switch & one fibre connection to connect a 100 Base-FX device Built in Switching ASIC ET-912+ series have turned the function more like a 2 ports switch than a traditional converter. User can get all switching benefits such as frames checking & filtering Feature LED & Fibre link alarm User could monitor the device through Feature LED. In addition, Fibre Link Alarm could allow user to monitor & maintain their critical fibre link more effectively Unique voltage supervisor Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fibre port & TP port work normally when thunder storm or power unstable occurring cause the power electricity suddenly down in an instant time. Plug-&-Play Installation Simply to plug the TP & fibre port to the device having the media convertibility Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

High Speed Solution boosts coverage & signal strength Edimax EW-7303 A Pn is a high speed wireless broadband router that complies with wireless IEEE 802.11b/g/n standards. The EW-7303 A Pn provides the wireless output power to 100m W. Its coverage & distance is more than 4KM with the build-in 9 d Bi directional antenna. With fine-tuned performance, the EW-7303 A Pn is truly the best choice of cost-effective long distance data transfer solution. Multiple Operation Modes In addition to easy installation, the EW-7303 A Pn Outdoor Range Extender/ Access Point can be configured to operate in four modes: Access Point (AP), Client Mode, Wireless Distribution System (WDS) with AP, or pure WDS. These settings provide versatile solutions to a wide range of wireless applications. ...

N150 Wireless Personal Hotspot & Travel Router
- The world’s tiniest travel router & personal hotspot.
- Adds Ethernet

...

EW-7811 Un V2 is a nano USB (Universal Serial Bus) wireless adapter that supports maximum range & speed. Despite the size, this tiny USB (Universal Serial Bus) adapter supports higher data rate of up to 150 Mbps when connecting with wireless 802.11n device which is 3 times faster than your normally 11g connection. You can just plug it into computer's USB (Universal Serial Bus) port & enjoy incredible high-speed wireless network access. This is for sure the trendiest piece of upgrade you can make to your wireless network. Wireless 802.11n Standard Up to 150 Mbps EW-7811 Un V2 complies with wireless IEEE802.11b/g/n standards. Built with the latest wireless technology, the EW-7811 Un V2 can increase your wireless coverage up to 3 times as much & greatly help reduce “dead spots” compared to your old 11g adapter. Transmission data rate can go up to 150 Mbps when connected to a 802.11n device. It also extends its wireless signal distance, & provides more reliable wireless connections than standard IEEE 802.11g wireless networks. Green WLAN enhanced Energy Efficiency The EW-7811 Un V2 has adapted a clever protocol. This wireless USB (Universal Serial Bus) adapter smartly adjusts its power output according to the transmission distance & CPU offload. It drastically reduces power consumption when the connection is in idle. Designed with green WLAN technology, the EW-7811 Un V2 power consumption can be reduced with an average of 20% to 50%. Supports WPS Wi-Fi Protected Setup Wi-Fi Protected Setup (WPS) is a standard for easy & secure establishment of wireless networks. This wireless USB (Universal Serial Bus) adapter supports software WPS-compatible configuration. With a few clicks, your wireless network & router are immediately secured. Supports Multi-Language Easy Setup Wizard The included 16 languages easy setup wizard & friendly UI will walk you through configuring EW-7811 Un V2 to your wireless network. Tiny & Stylish Design for Laptops Can be easily plugged into any laptop without sacrificing portability & looks. Furthermore, it is designed with details in mind, such as not blocking other ports or be in the way of other USB (Universal Serial Bus) devices/cables. Embedded Wireless Adapter Solution for Industrial Io T (IIo T) Looking to add wireless connectivity to your product, device, or machine? Embedded with Edimax wireless USB (Universal Serial Bus) adapters, supports various Wi-Fi & Bluetooth standards, delivers a completely connected, always-on experience for your customers. With more than 30 years of manufacturing integration experience, trust our proven expertise & first-class support to power your Io T application. ...

The BR-6224N is a high speed broadband router that complies with wireless IEEE 802.11b/g, & is compatible with IEEE 802.11n standard. The BR-6224N works smoothly with wireless 802.11b/g devices at 54 Mbps data rate. When connecting with wireless 802.11n devices, the BR-6224N wireless data transmission rate can reach up to 150 Mbps
- a coverage 3 times better than a standard 802.11g/b router. The BR-6224 is truly a high performance & cost-effective solution for your home & small office network.
...

The EW-7711 U An is a high-gain USB (Universal Serial Bus) Wi-Fi adapter which provides a simple & easy way to add or upgrade wireless connectivity to your desktop or notebook computer. This adapter supports fast data rates up to 150 Mbps when connecting with typical 802.11n Wi-Fi routers. Just plug it into your computer’s USB (Universal Serial Bus) port for quick & easy Wi-Fi. 802.11n Wireless with Data Rates up to 150 Mbps Built with the latest Wi-Fi technology & complies with wireless 802.11b/g/n standards. WPS (Wi-Fi Protected Setup) Button The adapter supports both software & hardware based WPS, with a built in WPS button. WPS is a quick, easy & secure way to setup wireless connections with devices such as your wireless router. Simply push the WPS button on both devices & a Wi-Fi connection will automatically be established with robust WPA data encryption & authentication. Portable & Compact Design with Adjustable 3d Bi High-Gain Antenna The EW-7711 U An features an adjustable 3d Bi high-gain antenna to provide better wireless stability & range. USB (Universal Serial Bus) Cable for More Flexibility
Includes: a USB (Universal Serial Bus) cable to give more freedom to connect the adapter to your computer & find better Wi-Fi coverage.
...