Key Features Complies with the IEEE 802.3 & IEEE 802.3u standards Provides Store-&-Forward architecture Ultra small footprint (111x 68x 25mm) Supports Auto-MDI/MDI-X, full/half duplex modes & auto-negotiation Supports flow control & Non-blocking architecture 200 Mbps Full Duplex Transmission Edimax ES-3205P is a high speed fast Ethernet switch for home & small business. ES-3205P not only complies with IEEE 802.3/802.3u 10/100 Mbps Ethernet standard but also supports full duplex transmission. The full duplex feature can double the network throughput on every port. It is used for high speed server or switch-to-switch connections. The maximum throughput of every port can reach up to 200 Mbps Supports Wire-speed & Flow Control The ES-3205P built-in non-blocking & store-&-forward architecture feature your network with full-wire speed connections. It accommodates with flow control for full duplex mode & back pressure for half-duplex mode which ensure reliable data transfer & help to prevent data lost. Use ES-3205P to create a high-speeds network & benefit from its ultimate performance & reliability Supports Auto-MDI/MDI-X & Auto Sensing ES-3205P supports Pn P (plug & play) installation & auto-MDI/MDI-X function. You can connect ES-3205P with computers or Ethernet devices without any configuration. You also can use either straight-through or cross-over Ethernet cable & combine 10 & 100 Mbps devices into ES-3205P. The switch will automatically detect the right cable & speed for your device. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Best media conversion solutions for network connectivity. Edimaxs full series of Media Converter are designed to meet the needs for massive optical fibre network, provide the whole Ethernet / Fast Ethernet network implementation Key Features Compliant with IEEE 802.3 10 Base T & IEEE 802.3u 100 Base TX/100 Base FX One 10/100 Base TX Ethernet TP Port & One 100 Base FX Ethernet Fibre Port TP Port can support Half/ Full-Duplex, Auto-MDI/MDI-X & Auto-Negotiation Providing a slide switch for Full- & Half-Duplex selection on FX Port Multiple Fiber Connectors Migrating between copper & fibre-based Medium ET-912+ series convert the signals between two different transmission medium, allowing user a simple & cost-effective method to migrate between UTP cable & fibre optic cable. It can transmit signals up to 2km (multimode) & 30/40/60/80/100km (single-mode) in fibre medium, allowing users to extend network Comply with IEEE Standards ET-912+ series are fully compliant with IEEE 802.3 10 Base-T & 802.3u 100 Base-TX, 100 Base-FX standards. The device comes with one RJ-45 port to connect to a 10/100 Base-TX device such as workstation or switch & one fibre connection to connect a 100 Base-FX device Built in Switching ASIC ET-912+ series have turned the function more like a 2 ports switch than a traditional converter. User can get all switching benefits such as frames checking & filtering Feature LED & Fibre link alarm User could monitor the device through Feature LED. In addition, Fibre Link Alarm could allow user to monitor & maintain their critical fibre link more effectively Unique voltage supervisor Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fibre port & TP port work normally when thunder storm or power unstable occurring cause the power electricity suddenly down in an instant time Plug-&-Play Installation Simply to plug the TP & fibre port to the device having the media convertibility. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Best media conversion solutions for network connectivity. Edimaxs full series of Media Converter are designed to meet the needs for massive optical fibre network, provide the whole Ethernet / Fast Ethernet network implementation Key Features Compliant with IEEE 802.3 10 Base T & IEEE 802.3u 100 Base TX/100 Base FX One 10/100 Base TX Ethernet TP Port & One 100 Base FX Ethernet Fibre Port TP Port can support Half/ Full-Duplex, Auto-MDI/MDI-X & Auto-Negotiation Providing a slide switch for Full- & Half-Duplex selection on FX Port Multiple Fiber Connectors Migrating between copper & fibre-based Medium ET-912+ series convert the signals between two different transmission medium, allowing user a simple & cost-effective method to migrate between UTP cable & fibre optic cable. It can transmit signals up to 2km (multimode) & 30/40/60/80/100km (single-mode) in fibre medium, allowing users to extend network. Comply with IEEE Standards ET-912+ series are fully compliant with IEEE 802.3 10 Base-T & 802.3u 100 Base-TX, 100 Base-FX standards. The device comes with one RJ-45 port to connect to a 10/100 Base-TX device such as workstation or switch & one fibre connection to connect a 100 Base-FX device Built in Switching ASIC ET-912+ series have turned the function more like a 2 ports switch than a traditional converter. User can get all switching benefits such as frames checking & filtering Feature LED & Fibre link alarm User could monitor the device through Feature LED. In addition, Fibre Link Alarm could allow user to monitor & maintain their critical fibre link more effectively Unique voltage supervisor Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fibre port & TP port work normally when thunder storm or power unstable occurring cause the power electricity suddenly down in an instant time. Plug-&-Play Installation Simply to plug the TP & fibre port to the device having the media convertibility Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

1000 Base-T to 1000 Base-SX/LX Media Converter Best media conversion solutions for network connectivity. Edimaxs full series of Media Converter are designed to meet the needs for massive optical fiber network, provide the whole Gigabit Ethernet network implementation. Key Features Compliant with IEEE 802.3ab 1000 Base T & IEEE 802.3z 1000 Base SX/LX One 1000 Base SX/LX Fibre Port can support either Multi or Single Mode Multiple Fiber Connectors TP Port can support Half/ Full-Duplex, Auto-MDI/MDI-X & Auto-Negotiation Migrating between copper & fibre-based Medium ET-913+ series convert the signals between two different transmission medium, allowing user a simple & cost-effective method to migrate between UTP cable & fibre optic cable. It can transmit signals up to 550m (multimode) & 10/20/30/60km (single-mode) in fibre medium, allowing users to extend network Comply with IEEE Standards ET-913+ series are fully compliant with IEEE 802.3ab 1000 Base-T & 802.3z 1000 Base-SX/LX standards. The device comes with one RJ-45 port to connect to a 1000 Base-T device such as workstation or switch & one fibre connection to connect a 1000 Base-SX/LX device Feature LED & Fibre link alarm User could monitor the device through Feature LED. In addition, Fibre Link Alarm could allow user to monitor & maintain their critical fibre link more effectively Unique voltage supervisor Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fibre port & TP port work normally when thunder storm or power unstable occurring cause the power electricity suddenly down in an instant time Plug-&-Play Installation Simply to plug the TP & fibre port to the device having the media convertibility Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

High Speed Solution boosts coverage & signal strength Edimax EW-7303 A Pn is a high speed wireless broadband router that complies with wireless IEEE 802.11b/g/n standards. The EW-7303 A Pn provides the wireless output power to 100m W. Its coverage & distance is more than 4KM with the build-in 9 d Bi directional antenna. With fine-tuned performance, the EW-7303 A Pn is truly the best choice of cost-effective long distance data transfer solution. Multiple Operation Modes In addition to easy installation, the EW-7303 A Pn Outdoor Range Extender/ Access Point can be configured to operate in four modes: Access Point (AP), Client Mode, Wireless Distribution System (WDS) with AP, or pure WDS. These settings provide versatile solutions to a wide range of wireless applications. ...

EW-7811 Un V2 is a nano USB (Universal Serial Bus) wireless adapter that supports maximum range & speed. Despite the size, this tiny USB (Universal Serial Bus) adapter supports higher data rate of up to 150 Mbps when connecting with wireless 802.11n device which is 3 times faster than your normally 11g connection. You can just plug it into computer's USB (Universal Serial Bus) port & enjoy incredible high-speed wireless network access. This is for sure the trendiest piece of upgrade you can make to your wireless network. Wireless 802.11n Standard Up to 150 Mbps EW-7811 Un V2 complies with wireless IEEE802.11b/g/n standards. Built with the latest wireless technology, the EW-7811 Un V2 can increase your wireless coverage up to 3 times as much & greatly help reduce “dead spots” compared to your old 11g adapter. Transmission data rate can go up to 150 Mbps when connected to a 802.11n device. It also extends its wireless signal distance, & provides more reliable wireless connections than standard IEEE 802.11g wireless networks. Green WLAN enhanced Energy Efficiency The EW-7811 Un V2 has adapted a clever protocol. This wireless USB (Universal Serial Bus) adapter smartly adjusts its power output according to the transmission distance & CPU offload. It drastically reduces power consumption when the connection is in idle. Designed with green WLAN technology, the EW-7811 Un V2 power consumption can be reduced with an average of 20% to 50%. Supports WPS Wi-Fi Protected Setup Wi-Fi Protected Setup (WPS) is a standard for easy & secure establishment of wireless networks. This wireless USB (Universal Serial Bus) adapter supports software WPS-compatible configuration. With a few clicks, your wireless network & router are immediately secured. Supports Multi-Language Easy Setup Wizard The included 16 languages easy setup wizard & friendly UI will walk you through configuring EW-7811 Un V2 to your wireless network. Tiny & Stylish Design for Laptops Can be easily plugged into any laptop without sacrificing portability & looks. Furthermore, it is designed with details in mind, such as not blocking other ports or be in the way of other USB (Universal Serial Bus) devices/cables. Embedded Wireless Adapter Solution for Industrial Io T (IIo T) Looking to add wireless connectivity to your product, device, or machine? Embedded with Edimax wireless USB (Universal Serial Bus) adapters, supports various Wi-Fi & Bluetooth standards, delivers a completely connected, always-on experience for your customers. With more than 30 years of manufacturing integration experience, trust our proven expertise & first-class support to power your Io T application. ...

The BR-6224N is a high speed broadband router that complies with wireless IEEE 802.11b/g, & is compatible with IEEE 802.11n standard. The BR-6224N works smoothly with wireless 802.11b/g devices at 54 Mbps data rate. When connecting with wireless 802.11n devices, the BR-6224N wireless data transmission rate can reach up to 150 Mbps
- a coverage 3 times better than a standard 802.11g/b router. The BR-6224 is truly a high performance & cost-effective solution for your home & small office network.
...

The EW-7711 U An is a high-gain USB (Universal Serial Bus) Wi-Fi adapter which provides a simple & easy way to add or upgrade wireless connectivity to your desktop or notebook computer. This adapter supports fast data rates up to 150 Mbps when connecting with typical 802.11n Wi-Fi routers. Just plug it into your computer’s USB (Universal Serial Bus) port for quick & easy Wi-Fi. 802.11n Wireless with Data Rates up to 150 Mbps Built with the latest Wi-Fi technology & complies with wireless 802.11b/g/n standards. WPS (Wi-Fi Protected Setup) Button The adapter supports both software & hardware based WPS, with a built in WPS button. WPS is a quick, easy & secure way to setup wireless connections with devices such as your wireless router. Simply push the WPS button on both devices & a Wi-Fi connection will automatically be established with robust WPA data encryption & authentication. Portable & Compact Design with Adjustable 3d Bi High-Gain Antenna The EW-7711 U An features an adjustable 3d Bi high-gain antenna to provide better wireless stability & range. USB (Universal Serial Bus) Cable for More Flexibility
Includes: a USB (Universal Serial Bus) cable to give more freedom to connect the adapter to your computer & find better Wi-Fi coverage.
...

The Edimax EW-7438 R Pn Mini Wi-Fi Extender is a Wi-Fi extender with built-in power adapter in a compact design which can be plugged directly into an electrical outlet. The ES-7438 R Pn Mini comes with an intuitive i OS & Android smartphone companion app for controlling the Wi-Fi schedule & guest network. Convenient placement means that you can increase the signal coverage of your Wi-Fi network for better Wi-Fi quality. Featuring smart i Q Setup, installation is quick & easy & the EW-7438 R Pn Mini features 3-in-1 Wi-Fi extender, access point or wireless bridge operating modes. Just configure the mode you need for your network environment. in addition, it complies with wireless 802.11b/g/n standards & provides data transmission rates of up to 300 Mbps. With the Edimax EW-7438 R Pn Mini, you can enjoy high-speed wireless networking throughout your home without additional cabling.. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px solid eee;clear:both;font-family:" Helvetica Neue", Helvetica, Arial, sans-serif;font-
Size:12px}.rm-row h 2{font-
Size:22px!important}.rm-cont{padding:15px}.rm-cont img{max-
Width:100%!important}.rm-align-center{max-
Width:100%;text-align:center!important}.rm-align-left{text-align:left!important}.rm-align-right{text-align:right!important}.u 1-2{
Width:50%}.u 1{
Width:100%; text-align:center;}.down-5{margin-top:5px}.down-10{margin-top:10px}.down-15{margin-top:15px}.down-20{margin-top:20px}.down-25{margin-top:25px}.down-30{margin-top:30px}.down-35{margin-top:35px}.down-40{margin-top:40px}.down-45{margin-top:45px}.down-50{margin-top:50px}.down-55{margin-top:55px}.down-60{margin-top:60px}.down-65{margin-top:65px}.down-70{margin-top:70px}.down-75{margin-top:75px}.down-80{margin-top:80px}.down-85{margin-top:85px}.down-90{margin-top:90px}.scale-img-50{
Width:50%!important}.scale-img-75{
Width:75%!important} N300 Mini Wi-Fi Extender/ Access Point/ Wi-Fi Bridge Extends the range of existing 802.11b/g/n Wi-Fi networks i Q Setup for easy Wi-Fi extension Smart App Control & Analytics: Free Edi Range app with local Wi-Fi environment analytics, Wi-Fi scheduling & guest network Smart 3-in-1 mode: Access Point, Wi-Fi Extender & Wi-Fi Bridge Compact, slim wall plug design for convenient placement Finds best setup location for optimal Wi-Fi coverage with signal strength LED Features a hardware WPS (Wi-Fi Protected Setup) button Eliminate Wi-Fi Dead Zones & Double The Wi-Fi Coverage With Ease Plug the extender directly into an electrical outlet & the Edimax EW-7438 R Pn Mini can easily extend Wi-Fi coverage to dead zones which your existing Wi-Fi signal can’t reach & increase the signal coverage of your Wi-Fi network for better Wi-Fi quality. Smart 3-in-1 Extender, Access Point & Wireless Bridge The EW-7438 R Pn Mini can work as Wi-Fi extender, access point or wireless bridge. Just configure the mode you need for your network environment using the smart i Q Setup wizard & enjoy surfing the web. Smart App Control & Analytics The extender works together with our free Edi Range smartphone app which displays your local Wi-Fi environment & provides easy-to-understand analytics. Plus you can manage the extender’s wireless network & functions such as scheduling & guest network. Compact, Slim Wall Plug Design Plugs directly into an existing electrical socket – no need for an additional power cable. Not only is the Edimax EW-7438 R Pn Mini slim & compact, it is designed with a built-in power adapter. This means that you can plug it directly into an electrical outlet, eliminating the need for an additional power cable. You can easily install it where your Wi-Fi signal needs enhancement & enjoy high-speed wireless performance without any hassles. Works With Any Wireless Router Universal compatibility & easy web-based i Q Setup for quick & easy installation. Smart i Q Setup Features user-friendly browser-based i Q Setup for smart, automatic & quick installation. i Q Setup automatically detects the available Wi-Fi networks nearby & helps you establish a connection within seconds. Quick & Easy WPS Installation A WPS (Wi-Fi Protected Setup) button allows the EW-7438 R Pn Mini to join an existing wireless networking at the simple push of a button. Wireless 802.11n Standard (Data Rates Up To 300 Mbps) 802.11n technology is built into the EW-7438 R Pn Mini to broaden its wireless coverage & eliminate dead spots within wireless range. The EW-7438 R Pn Mini is also backward compatible with wireless 802.11b/g/n standards & can reach data transmission rates of up to 300 Mbps when connected to wireless 802.11n devices, providing faster & more reliable wireless connections than standard 802.11b/g wireless networks. Wi-Fi Scheduling* The Wi-Fi scheduling function lets you program intelligent schedules to manage Wi-Fi availability & power usage according to your home’s routine. (* Wi-Fi extender mode only) Guest Network* The EW-7438 R Pn Mini also features a guest wireless network which could be used for visitor & keep your home Wi-Fi private & secure. (* Wi-Fi extender mode only) Signal Strength LED Indicator Designed with a signal strength LED which helps you find the best setup location for optimal Wi-Fi coverage.








...

General
- Device Type: Network adapter
- Form Factor: External
- Interface (Bus) Type: Hi-Speed USB (Universal Serial Bus)


...