The Lian Li Strimer+ Triple 8-pin RGB is a flexible 8-pin GPU power extension cable which will brighten up the cable management in your gaming PC. It is constructed from flexible silicone for a smooth & even bend. With 162 addressable LEDs & a myriad of lighting effects, speeds, & brightnesses, this will upgrade your RGB aesthetic to a whole new level. THE FEATURES OF LIAN LI STRIMER+ TRIPLE 8-PIN RGB CABLE AT A GLANCE: 30cm of cable RGB lighting with 77 effects High end braided cable with integrated silicone strip Three 8-pin connectors for great flexibility Even & smooth bend across the whole cable Included RGB Controller for adjusting RGB speeds & brightness PREMIUM LIAN LI QUALITY The Lian Li Strimer+ Triple 8-pin RGB Extension Cable is made from high end braided cables with the addition of an integrated silicone strip. This provides even flexibility across the cables for a smooth curve & neat finish. The cable itself is 30cm in length ending in three 8-pin adaptors, making it compatible with most GPUs. Its premium build quality means this cable will not only work better but last longer too. SOPHISTICATED LIGHTING For enhancing your cable management aesthetic, the Lian Li Strimer+ Triple 8-Pin RGB Extension Cable comes with 162 addressable LEDs. These LEDs will make your system glow with over 77 dazzling lighting permutations, static colour, 5 brightnesses, & 12 speed controls. There are two methods for controlling the RGB lighting: via the RGB controller or through the motherboard’s built in RGB software. The Strimer+ Triple 8-Pin RGB controller is a simple device with four buttons to change the effect, colour, speed, & brightness. Alternatively, it can be connected to the motherboard via a 3-pin 5V a RGB header. Both methods offer synchronisation with additional a RGB devices, either physically with the LED signal output cable & controller or using the motherboard software to link devices. ...

The Lancool 205 at a glance: Premium materials Tempered glass side panel Side vents & magnetic dust filters for airflow MATX / ATX compatible The Lancool 205 in detail: The new Lancool 205 combines premium design with excellent cooling properties. Lian Li have crafted a particularly stylish Midi-Tower case with the Lanccool 205. It

Includes:: a tempered glass side panels to let users display any components they have installed. RGB LED illumination is particularly effective as mesh inlets on the front panel create an eye catching effect when they are illuminated. Perfect for PC modders
- easy access to components In addition to its great design, the Lancool 205 has plenty of room for your components. Air cooling support is excellent with space to install up to a total of four fans. With the front capable of holding up to two 120 or two 140mm fans & a further two 120 or two 140mm fans can be fitted to the top of the case. Two 120mm fans are included. In addition to supporting multiple fans the Lancool 205 has air inlets integrated into the front panel. There are also several on the the back, top & bottom of the case, which combine inline magnetic dust filters. Alternatively if you prefer water cooling a 280mm AIO radiator can be fitted. Room for Multiple Components & Drives The Lancool 205s interior offers plenty of space for all the hardware you need to make a powerful build. It is compatible with up to ATX motherboards & up to four 2.5& Prime; SSDs or 3.5& Prime; HDDs can be mounted. The I/O panel has two 3.0 USB (Universal Serial Bus) connectors, a power button, & audio & mic jack as well as an LED controller button.


...

The Lancool 205 at a glance: Premium materials Tempered glass side panel Side vents & magnetic dust filters for airflow MATX / ATX compatible The Lancool 205 in detail: The new Lancool 205 combines premium design with excellent cooling properties. Lian Li have crafted a particularly stylish Midi-Tower case with the Lanccool 205. It

Includes:: a tempered glass side panels to let users display any components they have installed. RGB LED illumination is particularly effective as mesh inlets on the front panel create an eye catching effect when they are illuminated. Perfect for PC modders
- easy access to components In addition to its great design, the Lancool 205 has plenty of room for your components. Air cooling support is excellent with space to install up to a total of four fans. With the front capable of holding up to two 120 or two 140mm fans & a further two 120 or two 140mm fans can be fitted to the top of the case. Two 120mm fans are included. In addition to supporting multiple fans the Lancool 205 has air inlets integrated into the front panel. There are also several on the the back, top & bottom of the case, which combine inline magnetic dust filters. Alternatively if you prefer water cooling a 280mm AIO radiator can be fitted. Room for Multiple Components & Drives The Lancool 205s interior offers plenty of space for all the hardware you need to make a powerful build. It is compatible with up to ATX motherboards & up to four 2.5& Prime; SSDs or 3.5& Prime; HDDs can be mounted. The I/O panel has two 3.0 USB (Universal Serial Bus) connectors, a power button, & audio & mic jack as well as an LED controller button.


...

The Features of the Lian Li LANCOOL II Midi-Tower at a Glance: Premium Midi-Tower for motherboards up to E-ATX Integrated, digitally addressable RGB-LED lighting Tempered glass side doors with magnetic closing mechanism Large mesh surfaces for enhanced air flow Space for graphics cards up to 384 mm long Designed for dual- & triple radiators

Includes:: three 120 mm fans, up to eight supported Supports up to seven drives such as SSDs & traditional hard drives LANCOOL II: Midi-Tower for Air- & Water Cooling Those who prefer for traditional air cooling will love this case, thats because the LANCOOL II offers users the option of installing up to a total of eight fans. The front supports up to three 120- or two 140 mm fans, with the roof supporting two fans up to 140 mm in diameter. Two 120 mm fans can be installed in the top of the PSU shroud & a 120 mm model can be attached to the rear wall of the case. Installed by Lian Li themselves, the case

Includes:: three 120 mm fans pre-installed: one on the front, one at the back & one in the roof. CPU coolers can be up to 176 mm tall. Lian Li also took the installation of Ai O- & custom water cooling solutions: the front allows for a 360 mm triple radiator or a 280 mm dual radiator. A removable slide-out bay makes installation much easier. This can be mounted in two differing ways, allowing up to 110 mm of space for radiators & fans or for increasing the space available to fans with a slimmer radiator from the front cover. The roof allows for a 240 mm radiator to be installed. Up to 65 mm of space (depth) is available. Stylish & Functional Design The LANCOOL II has been designed from the ground up with an eye to cooling powerful hardware, offering multiple air inlets as a result: the otherwise smooth & sleek front cover is embedded with two 3.5cm wide mesh strips along with an aluminium plaque that bears the manufacturers name. The rear, roof & bottom of the case all include large air in- & outlets. The front & the roof are equipped with magnetic dust filters, & the dust filter underneath the power supply is located in a slide-out tray. As such all filters are removable & easily cleaned. Yet the LANCOOL II has more to offer than just functionality, it is no slouch in the looks department either: the mesh openings in the side of the angular front help show off the integrated digitally addressable RGB lighting. Both side panels of the case consist of tempered glass. They are attached by means of hinges towards the rear of the case, & fold outwards. Lian Li also designed the side doors to close in a smart manner: magnets! Both can be closed without the need for screws as a result. The design of the case means that users will enjoy being able to minimise the amount of unsightly wires & cables on show. Space for Components & Drives The completely black interior offers plenty of space for powerful hardware, for example for E-ATX motherboards up to a width of 280 millimeters & high-performance gaming graphics cards up to 384 millimeters in length. Two 2.5-inch SSDs can be mounted on individual mounts to the back of the motherboard tray. The right cover panel accommodates two more 2.5-inch drives on the inside. Under the power supply cover of the LANCOOL II lies a drive cage for three 3.5" or 2.5" drives. An ATX power supply unit measuring up to 210 millimeters will fit the case.



...

Exquisite Steel Craftmanship 35mm wide front mesh for optimised airflow. Flip Panels & Shrouds All Around Tempered glass side panels offer an unobstructed view of the internal components. The bottom flip shroud panels provide quick & easy access to the PSU/HDD installation area. Easy Cable Management The cover plates save your neck & fingers by hiding nearly all cables while offering easy access for cable management. Tool-less Sliding Hard Drive Cage Slide the hard drive bay along its bottom track to the position that best fits your interior configuration. Multi-way Fan/ Radiator Bracket The multi-way fan/radiator bracket revolutionises your notion of fan or radiator installation by offering four installation options to best cater to your interior configuration. Tool-less RGB Front Panel Built with a quick-connect adapter, the front panel can be easily removed or mounted back to immediately disconnect or light up the front RGB Switch Colours with Ease The lighting can be controlled through the C & M buttons on the top. There are seven lighting modes in total, whilst the eighth mode allows the lighting to be synced with an ARGB-compatible motherboard. ...

The Lancool II Mesh RGB is the latest update to Lian Lis popular Lancool series. This Mid-Tower case features a full mesh front panel, for enhanced airflow, & has been optimised for illumination as it features controller buttons to easily cycle through colours & effects of the three 120mm ARGB fans included. The Lancool II Mesh RGB also retains many of the characteristic features of the Lancool series such as a sleek, futuristic design & the use of premium materials, including SGCC steel & two tempered glass side panels. The Lancool II Mesh RGB at a glance: Premium Mid-Tower for motherboards up to E-ATX Full mesh front panel for outstanding air flow 3 x 120mm ARGB fans bundled with case Dual tempered glass panels with magnetic closing mechanism Room for up to a total of eight 120mm & eleven 2.5& Prime; SSDs The Lancool II Mesh RGB in detail: The Lancool II is a modern Mid-Tower with a stylish design & excellent cooling performance. It is has a robust steel frame, full mesh front panel & is perfect for RGB illumination. Optimised for airflow This new version of the Lancool II has been optimised for airflow with a large mesh front panel. As well as that the front supports up to three 120- or two 140 mm fans, with the roof supporting two fans up to 140 mm in diameter, one 120mm fan at the back & two 120mm fans about the PSU chamber. Regarding water cooling options, it is possible to install Ai O- & custom water cooling solutions. Up to a 360mm radiator can be fitted to the front & a 240mm radiator can be attached to the top of the case. In order to ensure clean air circulates within the case, Lian Li have included magnetic dust filters, which fit to the top & bottom of the case. Outstanding illumination & interior capacity This particular model of the Lancool II Mesh

Includes:: three 120mm 3-PIN 1300 RPM ARGB fans that can be fitted to the front panel. This fan configuration complements the mesh front panel to create an eye catching effects. These fans are of course digitally addressable & can be controlled via the motherboard or at the touch of the illumination colour or mode buttons on the i/o panel. There is room inside the Lancool II Mesh RGB for many components. Up to an E-ATX motherboard can be installed Two 2.5& Prime; SSDs can be attached to individual mounts to the back of the motherboard tray. The right cover panel accommodates two more 2.5& Prime; drives on the inside. Under the power supply cover there is a drive cage for three 3.5& Prime; or 2.5& Prime; drives. Finally the i/o panel, in addition to featuring illumination controller buttons for the ARGB fans has an audio jack two USB (Universal Serial Bus) 3.0 ports & one (optional) USB (Universal Serial Bus) 3.1 TYPE C port.

...

The Lancool II Mesh RGB is the latest update to Lian Lis popular Lancool series. This Mid-Tower case features a full mesh front panel, for enhanced airflow, & has been optimised for illumination as it features controller buttons to easily cycle through colours & effects of the three 120mm ARGB fans included. The Lancool II Mesh RGB also retains many of the characteristic features of the Lancool series such as a sleek, futuristic design & the use of premium materials, including SGCC steel & two tempered glass side panels. The Lancool II Mesh RGB at a glance: Premium Mid-Tower for motherboards up to E-ATX Full mesh front panel for outstanding air flow 3 x 120mm ARGB fans bundled with case Dual tempered glass panels with magnetic closing mechanism Room for up to a total of eight 120mm & eleven 2.5& Prime; SSDs The Lancool II Mesh RGB in detail: The Lancool II is a modern Mid-Tower with a stylish design & excellent cooling performance. It is has a robust steel frame, full mesh front panel & is perfect for RGB illumination. Optimised for airflow This new version of the Lancool II has been optimised for airflow with a large mesh front panel. As well as that the front supports up to three 120- or two 140 mm fans, with the roof supporting two fans up to 140 mm in diameter, one 120mm fan at the back & two 120mm fans about the PSU chamber. Regarding water cooling options, it is possible to install Ai O- & custom water cooling solutions. Up to a 360mm radiator can be fitted to the front & a 240mm radiator can be attached to the top of the case. In order to ensure clean air circulates within the case, Lian Li have included magnetic dust filters, which fit to the top & bottom of the case. Outstanding illumination & interior capacity This particular model of the Lancool II Mesh

Includes:: three 120mm 3-PIN 1300 RPM ARGB fans that can be fitted to the front panel. This fan configuration complements the mesh front panel to create an eye catching effects. These fans are of course digitally addressable & can be controlled via the motherboard or at the touch of the illumination colour or mode buttons on the i/o panel. There is room inside the Lancool II Mesh RGB for many components. Up to an E-ATX motherboard can be installed Two 2.5& Prime; SSDs can be attached to individual mounts to the back of the motherboard tray. The right cover panel accommodates two more 2.5& Prime; drives on the inside. Under the power supply cover there is a drive cage for three 3.5& Prime; or 2.5& Prime; drives. Finally the i/o panel, in addition to featuring illumination controller buttons for the ARGB fans has an audio jack two USB (Universal Serial Bus) 3.0 ports & one (optional) USB (Universal Serial Bus) 3.1 TYPE C port.

...

LANCOOL ONE Digital The Lian Li LANCOOL ONE is an elegantly designed case. It features a brushed aluminium front panel with a distinct diamond shaped air inlet with integrated, addressable RGB LED lighting to create appealing visual effects. The left-side of the LANCOOL ONE has a tempered glass side panel, which lets you display the components you've assembled within the case. Thanks to a convenient snap & lock mechanism the case can be modified without tools. THE LIAN LI LANCOOL ONE AT A GLANCE Striking brushed aluminium front panel with pre-installed addressable RGB LED lighting Robust tempered glass side panel Convenient snap & lock mechanism for installing & removing components Room for up to E-ATX form factor motherboards & plenty of components. THE LIAN LI LANCOOL ONE IN DETAIL The LANCOOL ONE is a Midi Tower case that can hold up to an E-ATX motherboard. Lian Li have made every effort to ensure the LANCOOL ONE has an outstanding design. The case's front panel has a particularly striking look, featuring both a brushed aluminium finish & an unmistakable diamond shaped air inlet, which is illuminated by fully addressable RGB LEDs. Lian Li have further enhanced the Lancool One's look by including a high quality tempered glass side panel. This enables users to display the components they've assembled inside the case. A FULLY FEATURED & EASY TO SET UP CASE The LANCOOL ONE has been designed to be simple to construct & modify. The case has a convenient snap & lock mechanism to easily install & remove components without tools. The Lian Li LANCOOL ONE has extensive connectivity options including space for up to four 2.5" SSDs or two 3.5" HDDs. There are also multiple sockets on the I/O panel, including two USB (Universal Serial Bus) 3.0 ports, HD audio input, an audio jack, & a LED controller. In respect to air cooling, fans can be mounted throughout the case. As standard the case has a 120mm fan on the front & another 120mm fan at the back of the case. Optionally three 120mm fans or two 140mm fans can be installed on the front & three 120mm or two 140mm fans on the roof. The bottom of the case also has room for up to two 120mm fans. If you prefer water cooling, you can install either 120 x 360mm, 120 x 240mm, 120 x 120mm, 140 x 140mm or 140 x 280mm on the front panel. Also on the case's roof, there is room for either 120 x 360mm, 120 x 240mm or 120 x 120mm radiators. There's even space at the back of the case for an additional 120 x 120mm radiator. The Lancool One has a large PSU shroud with space for two PSUs, meanwhile magnetic filters help prevent entry of dust into the case. ...

The Lian Li Lancool One Digital is an elegantly designed case. It features a brushed aluminium front panel with a distinct diamond shaped air inlet with integrated, addressable RGB LED lighting to create appealing visual effects. The left-side of the Lancool One has a tempered glass side panel, which lets you display the components you've assembled within the case. Thanks to a convenient snap & lock mechanism the case can be modified without tools. The Lian Li Lancool One at a glance: Striking brushed aluminium front panel with pre-installed addressable RGB LED lighting Robust tempered glass side panel Convenient snap & lock mechanism for installing & removing components Room for up to E-ATX form factor motherboards & plenty of components. The Lian Li Lancool One in detail: The Lancool One is a full size tower chassis that can hold up to an E-ATX motherboard. Lian Li have made every effort to ensure the Lancool One has an outstanding design. The case's front panel has a particularly striking look, featuring both a brushed aluminium finish & an unmistakable diamond shaped air inlet, which is illuminated by fully addressable RGB LEDs. Lian Li have further enhanced the Lancool One's look by including a high quality tempered glass side panel. This enables users to display the components they've assembled inside the case. A fully featured & easy to set up case: The Lancool One has been designed to be simple to construct & modify. The case has a convenient snap & lock mechanism to easily install & remove components without tools. The Lian Li Lancool One has extensive connectivity options including space for up to four 2.5" SSDs or two 3.5" HDDs. There are also multiple sockets on the I/O panel, including a type-C USB (Universal Serial Bus) 3.1 connector, two USB (Universal Serial Bus) 3.0 ports, HD audio input, an audio jack, & a LED controller. In respect to air cooling, fans can be mounted throughout the case. As standard the case can hold a 120mm fan on the front & another 120mm fan at the back of the case. Optionally three 120mm fans or two 140mm fans can be installed on the front & three 120mm or two 140mm fans on the roof. The bottom of the case also has room for up to two 120mm fans. If you prefer water cooling, you can install either 120 x 360mm, 120 x 240mm, 120 x 120mm, 140 x 140mm or 140 x 280mm on the front panel. Also on the case's roof, there is room for either 120 x 360mm, 120 x 240mm or 120 x 120mm radiators. There's even space at the back of the case for an additional 120 x 120mm radiator. The Lancool One has a large PSU shroud with space for two PSUs, meanwhile magnetic filters help prevent entry of dust into the case. ...

THE LIAN LI LANCOOL ONE AT A GLANCE Striking brushed aluminium front panel with pre-installed RGB LED lighting Robust tempered glass side panel Convenient snap & lock mechanism for installing & removing components Room for up to E-ATX form factor motherboards & plenty of components. THE LIAN LI LANCOOL ONE IN DETAIL The LANCOOL ONE is a Midi Tower case that can hold up to an E-ATX motherboard. Lian Li have made every effort to ensure the LANCOOL ONE has an outstanding design. The case's front panel has a particularly striking look, featuring both a brushed aluminium finish & an unmistakable diamond shaped air inlet, which is illuminated by RGB LEDs. Lian Li have further enhanced the Lancool One's look by including a high quality tempered glass side panel. This enables users to display the components they've assembled inside the case. A FULLY FEATURED & EASY TO SET UP CASE The LANCOOL ONE has been designed to be simple to construct & modify. The case has a convenient snap & lock mechanism to easily install & remove components without tools. The Lian Li LANCOOL ONE has extensive connectivity options including space for up to four 2.5" SSDs or two 3.5" HDDs. There are also multiple sockets on the I/O panel, including two USB (Universal Serial Bus) 3.0 ports, HD audio input, an audio jack, & a LED controller. In respect to air cooling, fans can be mounted throughout the case. As standard the case has a 120mm fan on the front & another 120mm fan at the back of the case. Optionally three 120mm fans or two 140mm fans can be installed on the front & three 120mm or two 140mm fans on the roof. The bottom of the case also has room for up to two 120mm fans. If you prefer water cooling, you can install either 120 x 360mm, 120 x 240mm, 120 x 120mm, 140 x 140mm or 140 x 280mm on the front panel. Also on the case's roof, there is room for either 120 x 360mm, 120 x 240mm or 120 x 120mm radiators. There's even space at the back of the case for an additional 120 x 120mm radiator. The Lancool One has a large PSU shroud with space for two PSUs, meanwhile magnetic filters help prevent entry of dust into the case. ...