Lian Li has done it again! This time they have excelled in creating a functional yet stylish case & improving it even more. The Lian Li O11 Dynamic XL Midi-Tower combines brushed aluminium with tempered glass elements. The

Dimensions of the case are designed so that even the huge EEB ASUS ROG Dominus Extreme motherboard with Intels C621 chipset & Socket 3647 for Xeon processors will fit with the assistance of an additional accessory (available separately). What Lian Li have retained here is the broad dual-chamber design, which offers plenty of space for high-end gaming components as well as excellent cable management options. The options open to users when it comes to air- or water cooling, it goes without saying, are second to none. THE FEATURES OF THE LIAN LI O11DYNAMIC XL MIDI-TOWER: Premium combination of aluminium, tempered glass & steel Space for E-ATX-, ATX-, Micro-ATX- or Mini-ITX motherboards 6x 2, 5"-SSDs & 4x 3, 5"-HDDs including HDD hot-swap functionality Front panel with 4x USB (Universal Serial Bus) 3.0 Type-A & 1x USB (Universal Serial Bus) 3.1 Type-C Graphics cards up to 44, 6 cm long supported Three slots for 360 mm radiators Fits up to ten 120 mm fans E-ATX CASE WITH PREMIUM DESIGN: BRUSHED ALUMINIUM MEETS TEMPERED GLASS The modular Lian Li O11 Dynamic XL Midi-Tower combines steel with a tinted, tempered glass side panel for superb looks. Lian Li takes things one step further however, & equips the right side panel & roof with 1 mm thick aluminium. The front also

Includes:: stunning tempered glass to allow users an unobstructed view of the cases interior. The right part of the front

Includes:: an I/O panel with a USB (Universal Serial Bus) 3.1 Type-C port, two USB (Universal Serial Bus) 3.0 ports & both obligatory audio ports. Two additional USB (Universal Serial Bus) 3.0 ports are located on the lower right part of the front section. In between the I/O panel & the tempered glass panel lies an attractive RGB-LED strip that stretches from top to bottom
- the lighting of which can be controlled by means of two switches on the front panel. The RGB-LED strip can also be connected to a traditional 5VDG port on compatible motherboards. ABUNDANT SPACE FOR GAMING HARDWARE The Lian Li O11 Dynamic XL Midi-Tower offers a tonne of space for powerful gaming hardware. Even the huge ROG Dominus Extreme EEB motherboard from Asus can be installed with the help of an additional accessory from Lian Li. Graphics cards can be up to 446 mm in length, with CPU coolers up to a height of 167 mm also fitting. An ATX form factor power supply can be installed in an upright orientation in the left side of the rear, power supplies up to 210 mm in length will fit. When it comes to installing Ai O- or custom water cooling, the case has got you covered
- up to three 360 mm radiators can be installed simultaneously: one in the roof, one in the bottom & one next to the motherboard. The right side of the case

Includes:: air vents that help to better dissipate heat produced by your gaming hardware. If you install three 360 mm radiators at the same time, slim radiators should be used in the roof & next to the motherboard. Generally speaking however, a triple-radiator setup is an option here, although it will require close attention to detail when it comes to fitting everything & we recommend checking with the manufacturer beforeh&, particularly when it comes to custom water cooling. The roof of the case provides space for a 280 mm radiator. superb AIRFLOW The radiator slots can of course be filled with fans if you prefer. At the side behind the front section, in the roof & on the bottom, up to three 120 mm fans will fit, & the roof / bottom of the case will support two 140 mm fans instead of three 120 mm fans. For clean & tidy cable management, multiple rubberised cable pass-throughs are available in places such as along the edges of where the motherboard will be seated. The right chamber of the case is where most of the cooler hardware that does not need a great deal of active cooling will go, such as the power supply & storage devices. The Lian Li PC-O11 Dynamic XL Midi-Tower stands slightly raised atop rubberised steel feet, meaning that cool air is able to enter the case through the dust filter in the bottom. Thanks to the chimney effect, warm air travels upwards & consequently exits through the roof
- which is also equipped with a dust filter. Two additional dust filters cover both perforated grilles in the right side section. The elegant Lian Li PC-O11 Dynamic XL Midi-Tower is not only a looker, its more than capable of supporting some serious gaming hardware to make it perfect for PC gaming enthusiasts of all stripes, particularly where water cooling is on the agenda. MASSIVE DRIVE CAPACITY In order to install all your storage devices, the case allows two HDD cages to be installed, meaning that four 3, 5" HDDs or four 2, 5" SSDs will fit. The four slots can be reached from the rear of the case, where they are covered by a perforated panel. Three 2, 5" drives can be installed on the reverse of the motherboard tray. in addition, three further 2, 5" slots are available on a bracket to the fore next to the motherboard tray. The bracket can instead be installed on the bottom of the case, creating some space next to the motherboard for a radiator for example. In total, four 3, 5"- & six 2, 5" drives can be mounted. Note: Those wishing to install their graphics card vertically in the Lian Li PC-O11 Dynamic XL Midi-Tower can opt for the Lian Li O11D-1 expansion kit. This is the only kit compatible with the Lian Li O11 Dynamic XL Midi-Tower!. It

Includes:: a compatible slot bracket as well as a premium quality riser cable. Technical

Details: Dimensions: 285 x 471 x 513 mm (W x H x D)

Material: Steel (interior), Aluminium (roof, side, front, feet), tempered glass (front, side) Weight: approx. 10, 1kg

Colour: White, black (HDD cages, gromits, tempered glass frame, dust filters) Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX (EEB with additional expansion kit) Total fans possible: 3x 120 mm / 2x 140 mm (bottom) 3x 120 mm / 2x 140 mm (roof) 3x 120 mm (side, front) 1x 120 mm (rear) Radiator Mountings (forfeits fan slots): 1x max. 360 mm / 280 mm (roof) 1x max. 360 mm / 280 mm (base) 1x max. 360 mm (side, forfeits SDD brackets) Filter: Bottom, roof, side panel Drive bays: 4x 2, 5/3, 5" drives (internal) 6x 2, 5" drives (internal) PSU: 1x ATX (optional) Expansion slots: 8 I/O Panel: 1x USB (Universal Serial Bus) 3.1 Type-C (internal connection) 4x USB (Universal Serial Bus) 3.0 Type-A (internal connection) 1x Audio In/ Out On-/ Off switch Max GPU length: 446 mm Max CPU cooler

Height: 167 mm Max PSU length: 210 mm




















...

Think Big. Build Small. O11D MINI adds to the O11 Dynamic series, the classic & mordrn looking case range. A case that can accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, you have the option to choose from 3 slots, 5 slots, or a 7 slot I/O shield to optimise the case to the configuration of your choice. Supports mini-ITX, micro-ATX, ATX, & E-ATX motherboard sizes & up to 9 fans to cool the chassis. YOUR CHOICE OF MODULAR BACK PANEL Decide how many expansion slots you need. Calculate the size of your fans & accessories. Pick your motherboard type. 3 kinds of back panels to meet your demand! SIDE RADIATOR CONFIGURATION WITH LONG GPU The 30mm space behind the side fan / radiator bracket allows users to mount fans, thus efficiently intake fresh air to directly cool the radiator & leaves enough space to install long GPUs in this compact case. WITH WATER COOLING IN MIND
- MODULAR PUMP STAND Friendly to custom water cooling users, the three different pump stands included can accommodate different scenarios. EXQUISITE APPEARANCE With a blend of brushed aluminium & tempered glass, the O11D Mini not only looks classic & modern, but also has a high-quality feel & touch on the exterior. DUAL-CHAMBER DESIGN FOR CABLE MANAGEMENT Carried from the design of the O11D series, cables quickly pass to the second chamber through rubber grommets. Multiple tie points & Velcro strap channels are provided to tidy up the cables while the SSD mounting bar helps keep the loose cables all snuggled up to ensure a clean look & prevent the right-side panel from not closing or bulging. COMPLETE DUST PROTECTION All 3 ventilation intake sides are equipped with magnetic dust filters & a removable dust tray to prevent the dust from entering the case.
...

Lian Li O11DXL-2 Motherboard Extension Panel for PC-O11 Dynamic XL ...

The Lian Li Strimer+ Triple 8-pin RGB is a flexible 8-pin GPU power extension cable which will brighten up the cable management in your gaming PC. It is constructed from flexible silicone for a smooth & even bend. With 162 addressable LEDs & a myriad of lighting effects, speeds, & brightnesses, this will upgrade your RGB aesthetic to a whole new level. THE FEATURES OF LIAN LI STRIMER+ TRIPLE 8-PIN RGB CABLE AT A GLANCE: 30cm of cable RGB lighting with 77 effects High end braided cable with integrated silicone strip Three 8-pin connectors for great flexibility Even & smooth bend across the whole cable Included RGB Controller for adjusting RGB speeds & brightness PREMIUM LIAN LI QUALITY The Lian Li Strimer+ Triple 8-pin RGB Extension Cable is made from high end braided cables with the addition of an integrated silicone strip. This provides even flexibility across the cables for a smooth curve & neat finish. The cable itself is 30cm in length ending in three 8-pin adaptors, making it compatible with most GPUs. Its premium build quality means this cable will not only work better but last longer too. SOPHISTICATED LIGHTING For enhancing your cable management aesthetic, the Lian Li Strimer+ Triple 8-Pin RGB Extension Cable comes with 162 addressable LEDs. These LEDs will make your system glow with over 77 dazzling lighting permutations, static colour, 5 brightnesses, & 12 speed controls. There are two methods for controlling the RGB lighting: via the RGB controller or through the motherboard’s built in RGB software. The Strimer+ Triple 8-Pin RGB controller is a simple device with four buttons to change the effect, colour, speed, & brightness. Alternatively, it can be connected to the motherboard via a 3-pin 5V a RGB header. Both methods offer synchronisation with additional a RGB devices, either physically with the LED signal output cable & controller or using the motherboard software to link devices. ...

The Lancool 205 at a glance: Premium materials Tempered glass side panel Side vents & magnetic dust filters for airflow MATX / ATX compatible The Lancool 205 in detail: The new Lancool 205 combines premium design with excellent cooling properties. Lian Li have crafted a particularly stylish Midi-Tower case with the Lanccool 205. It

Includes:: a tempered glass side panels to let users display any components they have installed. RGB LED illumination is particularly effective as mesh inlets on the front panel create an eye catching effect when they are illuminated. Perfect for PC modders
- easy access to components In addition to its great design, the Lancool 205 has plenty of room for your components. Air cooling support is excellent with space to install up to a total of four fans. With the front capable of holding up to two 120 or two 140mm fans & a further two 120 or two 140mm fans can be fitted to the top of the case. Two 120mm fans are included. In addition to supporting multiple fans the Lancool 205 has air inlets integrated into the front panel. There are also several on the the back, top & bottom of the case, which combine inline magnetic dust filters. Alternatively if you prefer water cooling a 280mm AIO radiator can be fitted. Room for Multiple Components & Drives The Lancool 205s interior offers plenty of space for all the hardware you need to make a powerful build. It is compatible with up to ATX motherboards & up to four 2.5& Prime; SSDs or 3.5& Prime; HDDs can be mounted. The I/O panel has two 3.0 USB (Universal Serial Bus) connectors, a power button, & audio & mic jack as well as an LED controller button.


...

The Features of the Lian Li LANCOOL II Midi-Tower at a Glance: Premium Midi-Tower for motherboards up to E-ATX Integrated, digitally addressable RGB-LED lighting Tempered glass side doors with magnetic closing mechanism Large mesh surfaces for enhanced air flow Space for graphics cards up to 384 mm long Designed for dual- & triple radiators

Includes:: three 120 mm fans, up to eight supported Supports up to seven drives such as SSDs & traditional hard drives LANCOOL II: Midi-Tower for Air- & Water Cooling Those who prefer for traditional air cooling will love this case, thats because the LANCOOL II offers users the option of installing up to a total of eight fans. The front supports up to three 120- or two 140 mm fans, with the roof supporting two fans up to 140 mm in diameter. Two 120 mm fans can be installed in the top of the PSU shroud & a 120 mm model can be attached to the rear wall of the case. Installed by Lian Li themselves, the case

Includes:: three 120 mm fans pre-installed: one on the front, one at the back & one in the roof. CPU coolers can be up to 176 mm tall. Lian Li also took the installation of Ai O- & custom water cooling solutions: the front allows for a 360 mm triple radiator or a 280 mm dual radiator. A removable slide-out bay makes installation much easier. This can be mounted in two differing ways, allowing up to 110 mm of space for radiators & fans or for increasing the space available to fans with a slimmer radiator from the front cover. The roof allows for a 240 mm radiator to be installed. Up to 65 mm of space (depth) is available. Stylish & Functional Design The LANCOOL II has been designed from the ground up with an eye to cooling powerful hardware, offering multiple air inlets as a result: the otherwise smooth & sleek front cover is embedded with two 3.5cm wide mesh strips along with an aluminium plaque that bears the manufacturers name. The rear, roof & bottom of the case all include large air in- & outlets. The front & the roof are equipped with magnetic dust filters, & the dust filter underneath the power supply is located in a slide-out tray. As such all filters are removable & easily cleaned. Yet the LANCOOL II has more to offer than just functionality, it is no slouch in the looks department either: the mesh openings in the side of the angular front help show off the integrated digitally addressable RGB lighting. Both side panels of the case consist of tempered glass. They are attached by means of hinges towards the rear of the case, & fold outwards. Lian Li also designed the side doors to close in a smart manner: magnets! Both can be closed without the need for screws as a result. The design of the case means that users will enjoy being able to minimise the amount of unsightly wires & cables on show. Space for Components & Drives The completely black interior offers plenty of space for powerful hardware, for example for E-ATX motherboards up to a width of 280 millimeters & high-performance gaming graphics cards up to 384 millimeters in length. Two 2.5-inch SSDs can be mounted on individual mounts to the back of the motherboard tray. The right cover panel accommodates two more 2.5-inch drives on the inside. Under the power supply cover of the LANCOOL II lies a drive cage for three 3.5" or 2.5" drives. An ATX power supply unit measuring up to 210 millimeters will fit the case.



...

Exquisite Steel Craftmanship 35mm wide front mesh for optimised airflow. Flip Panels & Shrouds All Around Tempered glass side panels offer an unobstructed view of the internal components. The bottom flip shroud panels provide quick & easy access to the PSU/HDD installation area. Easy Cable Management The cover plates save your neck & fingers by hiding nearly all cables while offering easy access for cable management. Tool-less Sliding Hard Drive Cage Slide the hard drive bay along its bottom track to the position that best fits your interior configuration. Multi-way Fan/ Radiator Bracket The multi-way fan/radiator bracket revolutionises your notion of fan or radiator installation by offering four installation options to best cater to your interior configuration. Tool-less RGB Front Panel Built with a quick-connect adapter, the front panel can be easily removed or mounted back to immediately disconnect or light up the front RGB Switch Colours with Ease The lighting can be controlled through the C & M buttons on the top. There are seven lighting modes in total, whilst the eighth mode allows the lighting to be synced with an ARGB-compatible motherboard. ...

The Lancool II Mesh Performance is the latest update to Lian Lis popular Lancool series. This Mid-Tower case features a full mesh front panel, for enhanced airflow, & has been optimised for performance as it features a controller button to easily cycle through the fan speed of its three bundle PWM fans. The Lancool II Mesh Performance also retains many of the characteristic features of the Lancool series such as a sleek, futuristic design & the use of premium materials, including SGCC steel & two tempered glass side panels. The Lancool II Mesh Performance at a glance: Premium Mid-Tower for motherboards up to E-ATX Full mesh front panel for outstanding air flow 3 x PWM fans bundled with case
- 2 x 140mm PWM Fan (front, 600-1200RPM), 1x 120mm PWM fan (rear 600-1500 RPM) Dual tempered glass panels with magnetic closing mechanism Room for up to a total of eight 120mm & eleven 2.5& Prime; SSDs The Lancool II Mesh Performance in detail: The Lancool II is a modern Mid-Tower with a stylish design with a robust steel frame & excellent cooling performance. Optimised for airflow This new version of the Lancool II has been optimised for airflow with a large mesh front panel. As well as that the front supports up to three 120- or two 140 mm fans, with the roof supporting two fans up to 140 mm in diameter, one 120mm fan at the back & two 120mm fans about the PSU chamber. Regarding water cooling options, it is possible to install Ai O- & custom water cooling solutions. Up to a 360mm radiator can be fitted to the front & a 240mm radiator can be attached to the top of the case. In order to ensure clean air circulates within the case, Lian Li have included magnetic dust filters, which fit to the top & bottom of the case. Outstanding cooling & interior capacity This particular model of the Lancool II Mesh

Includes:: a total of three PWM fans that 140mm fans to go in the front & one 120mm to go in the back. This fan configuration complements the mesh front panel to create amazing airflow throughout the case. These fans can be controlled via the motherboard or their speed can be easily adjusted at the touch of a button on the i/o panel. There is room inside the Lancool II Mesh Performance for many components. Up to an E-ATX motherboard can be installed Two 2.5& Prime; SSDs can be attached to individual mounts to the back of the motherboard tray. The right cover panel accommodates two more 2.5& Prime; drives on the inside. Under the power supply cover there is a drive cage for three 3.5& Prime; or 2.5& Prime; drives. Finally the i/o panel, in addition to featuring a speed controller button, has an audio jack two USB (Universal Serial Bus) 3.0 ports & one (optional) USB (Universal Serial Bus) 3.1 TYPE C port.


...

The Lancool II Mesh RGB is the latest update to Lian Lis popular Lancool series. This Mid-Tower case features a full mesh front panel, for enhanced airflow, & has been optimised for illumination as it features controller buttons to easily cycle through colours & effects of the three 120mm ARGB fans included. The Lancool II Mesh RGB also retains many of the characteristic features of the Lancool series such as a sleek, futuristic design & the use of premium materials, including SGCC steel & two tempered glass side panels. The Lancool II Mesh RGB at a glance: Premium Mid-Tower for motherboards up to E-ATX Full mesh front panel for outstanding air flow 3 x 120mm ARGB fans bundled with case Dual tempered glass panels with magnetic closing mechanism Room for up to a total of eight 120mm & eleven 2.5& Prime; SSDs The Lancool II Mesh RGB in detail: The Lancool II is a modern Mid-Tower with a stylish design & excellent cooling performance. It is has a robust steel frame, full mesh front panel & is perfect for RGB illumination. Optimised for airflow This new version of the Lancool II has been optimised for airflow with a large mesh front panel. As well as that the front supports up to three 120- or two 140 mm fans, with the roof supporting two fans up to 140 mm in diameter, one 120mm fan at the back & two 120mm fans about the PSU chamber. Regarding water cooling options, it is possible to install Ai O- & custom water cooling solutions. Up to a 360mm radiator can be fitted to the front & a 240mm radiator can be attached to the top of the case. In order to ensure clean air circulates within the case, Lian Li have included magnetic dust filters, which fit to the top & bottom of the case. Outstanding illumination & interior capacity This particular model of the Lancool II Mesh

Includes:: three 120mm 3-PIN 1300 RPM ARGB fans that can be fitted to the front panel. This fan configuration complements the mesh front panel to create an eye catching effects. These fans are of course digitally addressable & can be controlled via the motherboard or at the touch of the illumination colour or mode buttons on the i/o panel. There is room inside the Lancool II Mesh RGB for many components. Up to an E-ATX motherboard can be installed Two 2.5& Prime; SSDs can be attached to individual mounts to the back of the motherboard tray. The right cover panel accommodates two more 2.5& Prime; drives on the inside. Under the power supply cover there is a drive cage for three 3.5& Prime; or 2.5& Prime; drives. Finally the i/o panel, in addition to featuring illumination controller buttons for the ARGB fans has an audio jack two USB (Universal Serial Bus) 3.0 ports & one (optional) USB (Universal Serial Bus) 3.1 TYPE C port.

...

The Lancool II Mesh RGB is the latest update to Lian Lis popular Lancool series. This Mid-Tower case features a full mesh front panel, for enhanced airflow, & has been optimised for illumination as it features controller buttons to easily cycle through colours & effects of the three 120mm ARGB fans included. The Lancool II Mesh RGB also retains many of the characteristic features of the Lancool series such as a sleek, futuristic design & the use of premium materials, including SGCC steel & two tempered glass side panels. The Lancool II Mesh RGB at a glance: Premium Mid-Tower for motherboards up to E-ATX Full mesh front panel for outstanding air flow 3 x 120mm ARGB fans bundled with case Dual tempered glass panels with magnetic closing mechanism Room for up to a total of eight 120mm & eleven 2.5& Prime; SSDs The Lancool II Mesh RGB in detail: The Lancool II is a modern Mid-Tower with a stylish design & excellent cooling performance. It is has a robust steel frame, full mesh front panel & is perfect for RGB illumination. Optimised for airflow This new version of the Lancool II has been optimised for airflow with a large mesh front panel. As well as that the front supports up to three 120- or two 140 mm fans, with the roof supporting two fans up to 140 mm in diameter, one 120mm fan at the back & two 120mm fans about the PSU chamber. Regarding water cooling options, it is possible to install Ai O- & custom water cooling solutions. Up to a 360mm radiator can be fitted to the front & a 240mm radiator can be attached to the top of the case. In order to ensure clean air circulates within the case, Lian Li have included magnetic dust filters, which fit to the top & bottom of the case. Outstanding illumination & interior capacity This particular model of the Lancool II Mesh

Includes:: three 120mm 3-PIN 1300 RPM ARGB fans that can be fitted to the front panel. This fan configuration complements the mesh front panel to create an eye catching effects. These fans are of course digitally addressable & can be controlled via the motherboard or at the touch of the illumination colour or mode buttons on the i/o panel. There is room inside the Lancool II Mesh RGB for many components. Up to an E-ATX motherboard can be installed Two 2.5& Prime; SSDs can be attached to individual mounts to the back of the motherboard tray. The right cover panel accommodates two more 2.5& Prime; drives on the inside. Under the power supply cover there is a drive cage for three 3.5& Prime; or 2.5& Prime; drives. Finally the i/o panel, in addition to featuring illumination controller buttons for the ARGB fans has an audio jack two USB (Universal Serial Bus) 3.0 ports & one (optional) USB (Universal Serial Bus) 3.1 TYPE C port.

...