Kolink is steadily becoming renowned for their ability to create quality cases at very competitive prices. Now they have released the extremely stylish KLA-002 Midi-Tower. In terms of functionality, the case offers something that has almost become a rarity these days: two externally accessible 5.25" drive bays. The front is manufactured from premium quality plastic with the look of brushed aluminium. The tidy & well-designed interior of the KLA-002 offers plenty of space for hardware as well as watercooling
- & the cable management options only add to the premium feel of the case as a whole. Despite focusing on value for your money, Kolinks refusal to compromise on quality makes their cases an excellent choice for gamers. The Features of the Kolink KLA-002 Designer case for motherboards up to ATX form factor 1x Pre-installed 80 mm fan in the back I/O Panel with 2x USB (Universal Serial Bus) 2.0 / 1x USB (Universal Serial Bus) 3.0 & HD Audio In/ Out Supports a 240 mm radiator 3x 3.5 & 2x 2.5" drive slots Supports graphics cards up to 35 cm long & CPU coolers up to 15 cm in height The robust chassis is made from one millimetre-thick SECC steel & has a stylish plastic front section that takes after brushed aluminium in its appearance. The power supply would be placed at the top of the case towards the rear, while also offering space for up to two hard drives in front beneath the HDD cage. An additional HDD can be installed onto the reverse side of the motherboard tray. Alternatively, should you prefer, two 2.5" SDDs be installed. The case also reserves plenty of space for cable management. 5.25" drives have become somewhat of a rarity in recent years, but the KLA-002 offers two of them. This has the knock-on effect of allowing users to potentially enjoy the benefits of external fan controllers or optical drives. In order to keep the hardware installed in the case cool, the case

Includes:: a pre-installed 80 mm fan that exhausts warm air out of the spacious case. The front of the case allows for two 120 mm fans. Those who prefer watercooling on the other hand will appreciate the cases ability to support a 240 mm radiator. Large air vents in the front cover also help ensure the interior is kept well-supplied with fresh air. The left side of the case also supports an 80- or 120 mm fan.


...

Kolink is adding another cost effective business & small office option to the range in the form of the Kolink KLA-003. With a clean front panel, featuring a 5.25& Prime; bay & ventilation down the right side, the KLA-003 Midi-Tower is ideal for an office or business environment, featuring a no-nonsense interior with support for 335mm VGA cards, 160mm CPU coolers, up to 2 x 3.5& Prime; HDD or 4 x 2.5& Prime; SSD drives & even space for a 240mm radiator at the front. Features For motherboards up to ATX form factor 5.25& Prime; Drive Bay, with space for 2 x 3.5& Prime; HDDs or 4 x 2.5& Prime; SSDs One pre-installed 80mm fan Supports ATX Power Supplies All black coated interior I/O Panel with 1x USB (Universal Serial Bus) 3.0, 2x USB (Universal Serial Bus) 2.0, Audio In/ Out Supports 335mm VGA Cards, 160mm CPU Coolers & a 240mm radiator at the front. Kolink KLA-003: Simplicity meets functional design The KLA-003 is a compact midi-tower with

Dimensions of 365 x 175 x 410mm, yet has all the room you need for a functional system for the home or office. Alongside the pre-installed 80mm fan at the rear, the KLA-003 supports up to 2 x 120mm fans at the front & a 120mm fan on the side panel, allowing for ample airflow within the case. The front panel has air inlets on the right hand side to further improve overall airflow. The case supports ATX, Micro-ATX- & Mini-ITX form factor motherboards. Graphics cards up to 335mm can be installed, alongside 160mm CPU Coolers, ATX Power supplies & there is also space for a 240mm radiator on the front panel. Room for Storage The KLA-003 can support a decent amount of hard drives, including either 2 x 3.5& Prime; HDDs, or up to 4 x 2.5& Prime; SDDs as standard. Theres up to 21mm of cable management space available behind the motherboard tray for more effective routing of power supply cables & theres also space for a 5.25& Prime; device such as an optical drive. Functionality aside, the KLA-003 offers a no nonsense yet professional look with solid steel side panels & a subtle front panel design. The I/O panel is located on the top panel & sports a USB3.0 port, alongside a pair of USB2.0 ports. Two 3.5& Prime; jacks for headphones & microphones are available, along with the power button.

...

Kolink is expanding their range of cases with the addition of a new, compact, as well as high-performance case that is designed for use in schools as well as offices. Get ready for the Micro-ATX KLM-002: in terms of pure flexibilty bearing in mind the

Dimensions, this case is a force to be reckoned with. Depending on your space requirements, the case is designed for horizontal or vertical use. The interior allows for up to three 2.5" drives to be installed. A pre-installed 80mm fan helps ensure more than adequate cooling. Features Compact mini case: 35.5 x 9.5 x 28.5cm For motherboards up to Micro-ATX, processors with integrated GPU Horizontal or vertical orientation, stand included with case Slots for a 3.5- & 2.5" drive or up to three 2.5" drives One pre-installed 80mm fan Supports SFX power supplies I/O Panel with 1x USB (Universal Serial Bus) 3.0, 2x USB (Universal Serial Bus) 2.0, Audio In/ Out Kolink KLM-002: The Compact Case for Schools & Offices With a height/width of just 9.5cm the Kolink KLM-002 is exceptionally compact & can be set to the orientation you prefer depending on the space available with the help of an included st&. All told, this makes the KLM-002 an outstanding choice for use in spaces with large numbers of systems such as offices & schools. Despite the compact

Dimensions however, the KLM-002 is built to support a large amount of hardware regardless. The case supports Micro-ATX- & Mini-ITX form factor motherboards. As for graphics cards, 9.5cm of space is available, although the case is ideally suited for use with CPUs that include & integrated GPU. If you do require the extra gaming horsepower however, a low-profile GPU with a max length of approx. 150mm can be installed. Hard Drives & SFX Power Supply Support With air vents on the back, sides & roof, the case is designed from the ground up with airflow in mind, helped by the presence of a pre-installed 80mm fan. On the interior, a total of three 2.5" drives can be installed, & alternatively a 3.5"- & a 2.5" drive are also supported. A compact SFX-form factor power supply is required due to the

Dimensions of the case, this points outwards from the bottom of the case when set vertically. An angled kettle cable must be used so that the cable can be guided out towards the rear. Functionality aside, the appearance of the KLM-002 cuts no corners either. The front has the appearance of brushed aluminium. The I/O panel is also located on the front, offerings a USB (Universal Serial Bus) 3.0- & two USB (Universal Serial Bus) 2.0 ports. Two 3.5" jacks for headphones & microphones are available. The power switch is mounted to the side along the edge of the cases front cover.





...

Featuring a compact size & cost effective design, the Kolink KLM-003 Micro-ATX Case provides a strong solution for business & home office use. The KLM-003 features an attractive brushed aluminium effect front panel with side venting & a 5.25& Prime; drive bay, with internal support for up to a 300mm VGA card & 150mm CPU cooler, alongside ATX power supplies. Features For motherboards up to M-ATX form factor 5.25& Prime; Drive Bay, with space for 2 x 3.5& Prime; HDDs or 3 x 2.5& Prime; SSDs One pre-installed 80mm fan Supports ATX Power Supplies All black coated interior I/O Panel with 1x USB (Universal Serial Bus) 3.0, 1x USB (Universal Serial Bus) 2.0, Audio In/ Out Supports 300mm VGA Cards & 150mm CPU Coolers Kolink KLM-003: Compact yet functional The KLM-003 Micro-ATX case is designed to provide a small footprint within your office or home setup. The

Dimensions are just 365 x 184 x 345 mm in total, however there is plenty of room for your hardware. Graphics cards up to 300mm can be installed, alongside 150mm CPU Coolers & ATX Power supplies. Both Micro-ATX & Mini-ITX motherboards are supported. Storage & cooling covered The KLM-003 Micro-ATX case is designed to provide a small footprint within your office or home setup. The

Dimensions are just 365 x 184 x 345 mm in total, however there is plenty of room for your hardware. Graphics cards up to 300mm can be installed, alongside 150mm CPU Coolers & ATX Power supplies. Both Micro-ATX & Mini-ITX motherboards are supported. Storage & cooling covered The KLM-003 has space for either 2 x 3.5& Prime; HDDs or 3 x 2.5& Prime; SSDs. Theres up to 16mm of cable management space available behind the motherboard tray for more effective routing of power supply cables & theres also space for a 5.25& Prime; device such as an optical drive. A 80mm fan is installed at the rear as standard, with space for a 120mm fan available on the side panel. Functionality aside, the KLM-003 offers a simple yet attractive look with solid steel side panels & a brushed aluminium effect front panel design. The I/O panel is located on the top panel & sports a USB3.0 port, alongside a USB2.0 port. Two 3.5& Prime; jacks for headphones & microphones are available, along with the power button.



...

The Kolink Levante features a striking mesh front panel that subtly covers, although still leaves visible, three pre-installed RGB rainbow fans. The combination of RGB lighting & the mesh panel creates an impressive visual effect. The Kolink Levante also

Includes:: fully dual tempered glass panels on the cases left & right sides. The look is completed by a further pre-installed RGB rainbow fan mounted at the rear of the case. An overview of: Midi Tower case 440 x 206.5 x 475mm (Hx Wx D) Can hold up to E-ATX form factor motherboards Tempered glass right & left side panels

Includes:: 4x 120mm Ring Rainbow RGB fans Dedicated RGB lighting controller & remote control both bundled with case The Kolink Levante in detail: The Kolink Levante has an extraordinary design & is a highly functional Midi Tower case. It features a mesh front panel & dual tempered glass side panels. These enable users to prominently display the four bundled 120mm RGB fans as well as any other components they want to show the world. Not only do the fans look great but ensure excellent airflow for top performance. Three are fitted to the front panel while the last one goes in the back panel. Combined they create a striking effect. Kolink have included an RGB controller that can sync RGB lighting components within the case. This controller can manage up to 6 x fans & 2 x RGB strips & offers over 350 different lighting effects & modes. Theres even a remote control included to make switching between effects hassle-free. The Kolink Levante has many options for connectivity with the possibility of installing up to three 2.5"/3.5" HDD/SSD drives & a further two 2.5" HDD/SSD drives. The case features useful ports too, including a USB (Universal Serial Bus) 3.0 port on the front, individual audio ports for mics & headphones, an RGB control button & two USB (Universal Serial Bus) 2.0 ports. A bundled PSU shroud helps considerably in maintaining a neat & tidy look thanks to excellent cable management.



...

The Modular Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Modular Power the quietest power supply of its kind. The Modular Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible, flat & semi-modular cables use for connections across the system. Features 444W & 37A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Semi-modular cable management, modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 2x 6+2-pin, 4x SATA, 2x Molex Kolink Modular Power: Full performance & high efficiency The 500 Watt model of the Modular Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 444W & 37A on the +12V rail while providing 100W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Modular Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Modular Power has a 4+4 pin connector for the CPU & two 6+2 pin connectors for dedicated graphics cards. Four SATA & two Molex connectors are available for additional components. The flat, flexible, completely & semi-modular black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. ...

The Modular Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Modular Power the quietest power supply of its kind. The Modular Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible, flat & semi-modular cables use for connections across the system. The 600 Watt model of the Modular Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 546W & 45.5A on the +12V rail while providing 100W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Modular Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Modular Power has a 4+4 pin connector for the CPU & two 6+2 pin connectors for dedicated graphics cards. Four SATA & two Molex connectors are available for additional components. The flat, flexible, completely black & semi-modular cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. Main Features 546W & 45.5A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Semi-modular cable management, modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 2x 6+2-pin, 4x SATA, 2x Molex ...

The Modular Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Modular Power the quietest power supply of its kind. The Modular Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. Features 648W & 54A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 4x 6+2-pin, 6x SATA & 2x Molex Kolink Modular Power: Full performance & high efficiency The 700 Watt model of the Modular Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 648W & 54A on the +12V rail while providing 110W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Modular-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Modular Power has a 4+4 pin connector for the CPU & four 6+2 pin connectors for dedicated graphics cards. Six SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. ...

Cutting a striking figure amongst the highly competitive ATX-format segment, the Nimbus Midi-Tower from Kolink offers an RGB-LED strip rounding the large cut-out in the front – enabling a significant improvement in airflow. The hardware installed inside the case will also remain clear of dust thanks to the filter, which is important as users will also enjoy the opportunity to admire their hard-earned hardware through the tempered glass side. In spite of Kolink’s use of solid tempered glass, the Kolink Nimbus still weighs only 4, 58 Kg. The generous

Dimensions of the case not only help with airflow, they also allow users to install motherboards up to ATX in form factor. Graphics cards up to 325 mm long are compatible - meaning that the case is perfect for housing some seriously high-end gaming hardware. The Features of the Kolink Nimbus Midi-Tower at a Glance Designer case in black for motherboards up to ATX Large air inlet in the front with RGB-LED surround for better airflow Magnetic dust filters on the front, roof and bottom 4 mm thick tempered glass side panel 1x Pre-installed 120 mm fan, 6 possible in total I/O Panel with 2x USB (Universal Serial Bus) 2.0 / 1x USB (Universal Serial Bus) 3.0 & HD Audio In/ Out, RGB-LED controller Support for radiators up to 240 mm in front & roof 2x 3, 5/2, 5“ drive slots, 2x slots for 2, 5” drives on motherboard tray Supports graphics cards up to 32, 5 cm long & CPU coolers up to 16 cm Tempered Glass Side Panel & Pre-Installed Fan The robust chassis consists of one millimetre thick SECC steel &

Includes:: a four millimetre thick tempered glass side panel, with an aluminium-look plastic front. A large cut-out in the front has a digitally addressable RGB-LED strip included which can be both synced to compatible motherboards & controlled on the front panel. The magnetic dust filter located behind it helps keep the interior clean & dust free & allows for sufficient airflow. The interior has a black coating & utilises a power supply shroud to help maintain a clean aesthetic. Beneath this, users will find a non-removable drive cage with brackets for two 3, 5- or 2, 5” drives as well as space for the power supply itself. Two additional slots for 2, 5“ drives are located to the rear of the motherboard tray. Dust Filters Keep the Kolink Nimbus Clean In order to keep your gaming hardware supplied with a continuous stream of cool, fresh air
- one (of a possible total of six) 120 mm fan in black is included with the case & installed in the rear. The front of the case supports up to three 120 mm fans, the roof of the case allows for two further 120 mm fans. The front of the case supports two 140 mm fans. A 240 mm radiator can be installed in the front & the roof. The motherboard tray and the PSU cover include various openings for all the cable management options you could ask for. The air inlets located in the roof and underside of the case also include a fine mesh. These are magnetic & utilise a honeycomb-structure design to add strength. Graphics cards up to 32, 5 cm with CPU coolers up to 16 cm are both supported. in addition, the I/O panel located on the front of the case
Includes: two USB 2.0 ports along with a USB 3.0 Type-A port. A switch for controlling the RGB lighting is also available.





...

Combining performance & affordability, the Kolink Observatory Lite Midi-Tower is a perfect mix of features & functionality. With no less than 4 a RGB LED 12cm fans included as standard, controlled with a supplied remote which allows a variety of modes, lighting options & even speed control, the Observatory Lite also provides a stylish tempered glass front panel with ample side ventilation. The hardware you choose to install is also key; the tempered glass side panel means that you can create a showstopping system build. All in all the Observatory Lite is an extremely strong chassis with plenty to offer. THE FEATURES OF THE KOLINK OBSERVATORY LITE AT A GLANCE Tempered Glass front panel with 3 x pre-installed 12cm a RGB LED fans Tempered glass side panel for unobstructed view of the interior Designed for ATX-/ Micro-ATX-/ Mini-ITX motherboards RGB controller hub with remote control allowing various lighting modes & effects, plus fan speed control Option to sync to motherboard software provided as standard Pre-installed rear 120mm fan with digitally addressable RGB lighting Support for radiators up to 280mm in the front I/O Panel with 1x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0, HD Audio, RGB-LED controller PSU shroud with air inlets for a cleaner look Graphics cards up to 335 mm supported, CPU coolers up to 160 mm, PSUs up to 180 mm KOLINK OBSERVATORY LITE: FORM & FUNCTION IN ABUNDANCE The digitally addressable RGB-LED fans, 4 of which are preinstalled, are controlled by the supplied remote & RGB hub. Alternatively, the fans can be hooked up & controlled using a compatible motherboard thanks to its use of a standard 3-pin (5VDG) connector. The tempered glass side panel allows users to enjoy a panoramic view of the lighting used inside the Kolink Observatory Lite. Aside from the pre-installed fans, users are also free to install two more 120mm fans in the roof. This is where a magnetic dust filter can be found installed on the honeycomb-style mesh. The side-facing air inlets on the front & in the PSU shroud also contribute to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front. THE KOLINK OBSERVATORY LITE: HARDWARE FOCUSSED The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5& Prime; HDDs in the HDD cage provided, which also has anti-vibration mountings. Alternatively, 2.5& Prime; SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 30mm cable management space. Underneath the case is a removable dust filter appropriate to an ATX-form factor PSU, which can itself be up to 18 cm in length. Graphics cards can be up to 33.5cm long (31cm if mounting an AIO) & CPU coolers up to 16 cm tall. in addition, the I/O panel located at the front possesses two USB (Universal Serial Bus) 2.0 ports as well as an USB (Universal Serial Bus) 3.0 Type-A port. ...