SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 48.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800 M Hz f CK for 1600 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), double sided component


...

SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 48.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800 M Hz f CK for 1600 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), double sided component


...

Get in the game with Hyper X FURY. Even newbies get up to speed fast, since FURY automatically recognises its host platform & automatically overclocks to up to 1866 M Hz, providing plenty of power for your next death match. FURY's asymmetric heatspreader design lets you stand out from the crowd. It's available in black, blue, red & -- for the first time in the Hyper X line -- white, with a black PCB. So your rig can reflect your style & you can show it off with pride. It's 100-percent tested & LAN-ready plus it's backed by free technical support. Hyper X Pn P memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. Pn P cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Hyper X FURY is available in frequency speeds from 1333 M Hz to 1866 M Hz. Reach faster speeds & higher capacities by just installing the memory, no adjustments in BIOS needed. No matter if you are an Intel or AMD gamer, the Hyper X FURY is ideal for you. To make sure it works, Hyper X FURY has been tested with popular brands of motherboards. Does your system have enough memory to get you into the game? Kits are available to max out your system's memory with up to 16GB of high-performance goodness. ...

SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 48.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800 M Hz f CK for 1600 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), double sided component


...

SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 44.75ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 32.125ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 933 M Hz f CK for 1866 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), double sided component


...

The 19’’ Pro Lite B1980SD designed for business usage is a LED-backlit monitor with Height Adjustability & Screen Rotation allowing you to set the perfect position of the screen ensuring ergonomic posture & optimal viewing comfort. The 5ms response time & high contrast make the B1980SD ideal for a wide range of business applications. s RGB & gamma correction functions permit even the finest nuances of colour to be set accurately. The Pro Lite B1980SD

Includes:: DVI & VGA connectivity. HAS A Height Adjustable Stand means that you can set the perfect position of the screen ensuring ergonomic posture & optimal viewing comfort which benefits not only your health but also productivity. LED-BACKLIT A typical CCFL LCD uses four backlight lamps. Using LED diodes considerably lowers the power consumption & reduces the CO2 emission into the environment making this LCD a true ECO-Friendly product. ACR Contrast Ratio is a measurement of the difference between the darkest black & the brightest white your monitor can display. Advanced Contrast Ratio is a feature that automatically adjusts contrast & brightness of the screen to assure perfect picture quality while watching films & playing games. PIVOT Screen rotation means you can change the position of the screen from landscape into portrait. This feature can be very handy while working with long spreadsheets or texts. SPEAKERS This LED monitor is equipped with two high quality stereo speakers. VESA VESA mount compliance means you can easily mount your monitor to a wall. Technical

Specification Display 19” Screen LED TN panel Resolution 1280 x 1024 Contrast ratio 1000:1 ACR contrast ratio 5, 000, 000:1 Aspect ratio 5:4 Brightness 250 cd/m 2 Viewing angle: Horizontal/vertical: 170°/ 170°; right/left: 85°/ 85°; up/down: 85°/ 85° Response time 5ms Colour depth 16.7M Pixel pitch 0.294 x 0.294mm Power Power supply 100
- 240V Power consumption 16W Power management mode 0.5W Connectivity VGA DVI Features Tilt angle -5° / 22° Pivot 90° Swivel range: 320°; 160° left; 160° right Height adjustment 130mm 2 x 1W stereo speakers VESA 100 x 100 Kensington lock prepared Compatible with Apple-Macintosh computers.

Dimensions 411 x 426.5 x 244.5mm (Wx Hx D)






...

. rpd-row { overflow: hidden; padding: 30px 0; border-bottom: 1px solid eee; }. rpd-row h 3 { font-
Size:22px; }. rpd-row
...

An affordable transition to USB (Universal Serial Bus) 3.0. Kingston’s Data Traveler 100 G3 (DT100G3) USB (Universal Serial Bus) Flash drive is compliant with next-generation USB (Universal Serial Bus) 3.0 specifications to take advantage of technology in newer notebooks, desktop PCs & digital devices. With DT100G3, storing & transferring of documents, presentations, music, video, & more is quicker & easier than ever. DT100G3 features a sleek, cost-effective design to make the transition to a satisfying USB (Universal Serial Bus) 3.0 experience a minimal investment. Available in capacities from 8GB-64GB, DT100G3 is backward compatible with USB (Universal Serial Bus) 2.0 & has five-year warranty. Future-proof your portable storage now! Features Compliant
- with USB (Universal Serial Bus) 3.0 specifications. Dual Compatibility
- USB (Universal Serial Bus) 3.0 connectivity; backward compatible to USB (Universal Serial Bus) 2.0 Guaranteed
- five-year manufacturer warranty, free technical support

Specification Capacity: 16GB Dimensions: 60mm x 21.2mm x 10mm Operating Temperature: 0°C to 60°C Storage Temperature: -20°C to 85°C




...

Store, transfer & share your favourite photos, videos, music & more with Kingston’s Data Traveler SE9 G2 USB (Universal Serial Bus) Flash drive. Its stylish, capless design means there’s no cap to lose, & its ultra small form factor fits any lifestyle. Data Traveler SE9 G2 now offers fast USB (Universal Serial Bus) 3.0 speeds to save time when transferring, sharing or storing files. Its durable with a top-selling metal casing design & sturdy key ring. Data Traveler SE9 G2 is backed by a five-year warranty, free technical support & legendary Kingston reliability ...

Kingston's Data Traveler micro Duo Flash drives provide additional storage in a small, convenient form factor for tablets & smartphones that support the USB (Universal Serial Bus) OTG (On-The-Go) functionality. The USB (Universal Serial Bus) OTG standard allows mobile devices to directly connect to supported USB (Universal Serial Bus) devices. Data Traveler micro Duo Flash drives allow micro USB ports, often used for charging devices, to be used as expansion ports for up to 64GB of additional storage. Ideal for storing large files while traveling, DTDUO gives plug-&-play functionality to tablets & smartphones without micro SD ports at a lower price per GB than the extra built-in storage on a mobile device. With smartphones & tablets recording HD video & taking higher resolution photos, space on these devices gets used up faster than ever. DTDUO Flash drives let users move files, photos, videos & more
- without plugging into a PC1
- to offload or backup content. Sharing large files between mobile devices is easier than using online cloud services, & there's no need for a cable to transfer data between the device & a PC. Available in USB (Universal Serial Bus) 2.0 or USB (Universal Serial Bus) 3.0, DT micro Duo Flash drives are small, lightweight & easy to take anywhere, plus their sleek design complements any mobile device. The rotating cap protects the micro USB connector from damage. Data Traveler micro Duo Flash drives are backed by a five-year warranty, free technical support & legendary Kingston reliability. Product Features USB (Universal Serial Bus) OTG (On-The-Go)
- a standard which enables host functionality in certain phones/tablets with micro USB ports, enabling connectivity to USB (Universal Serial Bus) devices like Kingston's DT micro Duo 2-in-1
- micro USB & USB (Universal Serial Bus) 2.0 connectors for easy transfer of files between smartphones, tablets & computers Plug-&-Play
- simply connect as you would a standard USB (Universal Serial Bus) Flash drive Convenient
- ultra-small, pocket-sized design for easy transportability Speed
- available in either USB (Universal Serial Bus) 2.0 or USB (Universal Serial Bus) 3.0 to complement your existing devices Storage Memory Size 16 GB Memory Package USB (Universal Serial Bus) 3.0 Flash Drive Memory Type Flash Interfaces/ Ports Interface (s) USB 3.0 (1 x USB (Universal Serial Bus) 3.0 ) System Requirements Operating Systems Supported Windows 8.1 • Windows 8 • Windows 8 RT • Windows 7 (SP1) • Windows Vista (SP1, SP2) • Mac OS X v.10.6.x+ • Linux v.2.6.x+ Environmental Operating Temperature Operating Temperature 0 to 60 °C Storage Temperature Storage Temperature -20 to 85 °C Physical Form Factor Flash Drive

Dimensions 2.763 cm (W) x 1.646 cm (D) x 0.856 cm (H)
- Weight









...