Key Features 802.3az Power Saving 802.1q VLANs (Tag, Port & MAC-based) Qo S for Application traffic prioritisation Voice VLAN for Qo S (OUI Mode) Access Control List (ACL) The Vigor Switch G2280 is a high-performance, Gigabit smart switch with 24 RJ-45 ports (plus 4 additional Gigabit ports). The Vigor Switch G2280 features our latest generation of Dray Teks own switch operating system which is used across our range of enhanced switches. This enables a consistent user-experience & look-&-feel so that once youre familiar with one model, the others feel the same. The new UI is designed to be intuitive & efficient, whilst providing access to all of the products advanced features. Enhanced Feature Set The G2280s

Specification is packed with advanced features to aid reliability & switching performance to your network & is ready for the next generation with both IPv 4 & IPv 6 support. The G2280 has 24 standard (RJ45/copper) Gigabit Ethernet Ports, & four selectable ports (which can be set to either RJ-45 or SFP slots). Features for Quality of Service (Qo S), VLANs & network/switch security provide additional flexibility.

...

The Vigor Switch G2500 is a high-performance, high port density, Managed Gigabit Ethernet switch. Connect up to 48 Ethernet devices to each switch, in a standard 1u rack mounted form factor, with 2 additional dedicated SFP ports for uplinks. The Vigor Switch G2500 is fanless for silent operation. Designed for centralised management, the Vigor Switch G2500 can be provisioned & monitored through both the Vigor ACS management platform and/or, a Dray Tek Vigor router’s Central Switch Management. Easily provision the VLAN configuration through the router & clone switch configurations. Drastically reduce the setup time required for a complex network, with VLANs spanning multiple switches. Use the 4 switchable SFP/RJ-45 ports & 2 dedicated SFP module slots to link with additional switches using link aggregation, or plug in a suitable SFP module to use optical Fibre as an Ethernet uplink. The Vigor Switch G2500s Serial (RS232) Console port & SSH server allow for configuration & management of the Vigor Switch through its fully featured command line interface (CLI). Designed for Centralised Management Can be configured & monitored instantly through both the Vigor ACS cloud management platform and/or, a Dray Tek Vigor routers central switch management. Benefits: saves your valuable time & money. Easily provision, monitor & manage remote sites without on-site IT or dedicated staff. Voice VLAN & Surveillance VLAN Automatically assign VLANs & Qo S configuration to devices with matching MAC address OUI upon connection to the switch. Benefits: Reduces broadcast traffic & allow more control when implementing security policies. Security DHCP Snooping: Limit DHCP server responses to only a specified port. IP Source Guard: Protects against address spoofing. Access Control List: Controls which packet types (IPv 4, IPv 6 & MAC) should pass between ports on the switch. Hardware Monitoring It monitors & controls the switchs temperature & operating voltages. Email notification alerts integrated for power loss, downtime or configuration changes. Benefits: Prevents network failure. Ensures high availability. ...

Vigor Switch G2540x 10 Gb E Gigabit Switch with 48 Gigabit Ports & 6 10 Gb E SFP+ Uplink Ports Vigor Switch G2540x is a 54 port Gigabit L2+ Managed switch with a plethora of management options & enterprise-level features to improve network stability & security for businesses. Use the 4 switchable SFP/RJ-45 ports & 2 dedicated SFP module slots to link with additional switches using link aggregation, or plug in a suitable SFP module to use optical Fibre as an Ethernet uplink. Designed for centralised management, the Vigor Switch G2540x can be provisioned & monitored through both the Vigor ACS management platform and/or, a Dray Tek Vigor router’s Central Switch Management. Easily provision the VLAN configuration through the router & clone switch configurations. Drastically reduce the setup time required for a complex network, with VLANs spanning multiple switches. ...

The Vigor Switch P1092 is a high-performance, Gigabit smart switch with Po E+ (Power over Ethernet) on 8 RJ-45 ports (plus 2 additional SFP ports). All 8 ports are full speed Gigabit (1000 Mb/s) Ethernet; as well as ensuring that your wired Ethernet devices get maximum speed, Gigabit on Po E is is particularly useful on a network where your Po E devices are providing Gigabit devices to a secondary device, for example IP phone to desktop PC using their loop/passthrough support if it supports Gigabit Ethernet. Of course, regular, non-Po E devices can connect to the switch so will also still take advantage of the Gigabit speed so ideal for a mixed environment. The P1092

Includes:: the rack mounting bracket/kit as standard. Po E Devices The Vigor Switch P1092 is a Po E (Power over Ethernet) switch, providing power to any Po E-enabled device, most commonly IP phones, wireless access points or IP cameras over the Ethernet cable. As well as removing the need for local (at the desk) power supplies, making for tidier installations, Po E ensures power efficiency, providing only the power needed. Power is provided only when required. Po E also allows for installation of devices where there is no mains power (particularly useful for wireless access points). The P1092 supports both standard Po E (802.3af) & High-Power Po E (802.3at) devices. Central Management* The Dray Tek Vigor Switch P1092 can operate in standalone mode & be managed through its web interface or you need to manage & monitor the switch remotely, or have several Dray Tek Vigor Switches to administer, you can centrally manage them with a Dray Tek router which supports switch management*. This allows a Dray Tek router which is directly connected to the switch to manage it. For details on this click the tabs at the top of the page. The Dray Tek Vigor Switch P1092 has 2 Gigabit SFP module ports (labelled 9 & 10) which can be used in addition to the 8 RJ-45 ports. SFP slots are typically used for fibre transceivers. In comparison to copper (RJ-45) cables, using fibre for connectivity provides longer range & resilience from electrical interference. The SFP ports provide compatibility with your choice of SFP modules (not included) & therefore the most appropriate medium for your application.

...

The Vigor Switch P1280 is a high-performance, Gigabit switch with Po E+ (Power over Ethernet) on 24 RJ-45 ports (plus 4 additional Gigabit ports). With the increase in Po E powered devices requiring full power, notably wireless access points & IP cameras, the generous 340W power budget is much higher than many other products in its class. New Dray Tek OS & User Interface The Vigor Switch P1280 features our latest generation of Dray Teks own switch operating system which is used across our range of enhanced switches. This enables a consistent user-experience & look-&-feel so that once youre familiar with one model, the others feel the same. The new UI is designed to be intuitive & efficient, whilst providing access to all of the products advanced features. Enhanced Feature Set The P1280s

Specification is packed with advanced features to aid reliability & switching performance to your network & is ready for the next generation with both IPv 4 & IPv 6 support. The P1280 has 24 standard (RJ45/copper) Gigabit Ethernet Ports, all with Po E+ & four selectable ports (which can be set to either RJ-45 or SFP slots). Features for Quality of Service (Qo S), VLANs & network/switch security provide additional flexibility. Po E Devices The Vigor Switch P1280 is a Po E (Power over Ethernet) switch, providing power to any Po E-enabled device, most commonly IP phones, wireless access points or IP cameras over the Ethernet cable. As well as removing the need for local (at the desk) power supplies, making for tidier installations, Po E ensures power efficiency, providing only the power needed, as well as allowing for time schedules for powering up/down & remote rebooting. Power is provided only when required. Po E also allows for installation of devices where there is no mains power (particularly useful for wireless access points). The P1280 supports both standard Po E (802.3af) & High-Power Po E (802.3at) devices.

...

8+4 Port Gigabit Managed Switch: 8 x RJ-45 Ethernet Ports with Po E+ 4 x Combo RJ-45 or SFP (Fibre Module) Ports Po E (Power-over-Ethernet) for IP phones, wireless access points, IP Cameras etc. Fanless for silent operation with generous 140w Po E Power budget 802.3af (Po E) & 802.3at (High Power Po E) 802.1q VLANs (Tag, Port & MAC-based) Access Control List (ACL) Secure Networking with 802.1x Port Security, IP Source Guard & DHCP Snooping Qo S for Application traffic prioritisation Voice & IP Camera VLANs for auto Qo S prioritisation via MAC address OUI Port Mirroring & Link Aggregation IGMP Snooping/ Querier & IPv 6 MLD Snooping IPv 4 & IPv 6 Support Centrally managed or standalone operation Console Port for CLI configuration Desktop, Wall or Rack mountable The Vigor Switch P2121 is a silent, high-performance, Gigabit smart switch with Po E+ (Power over Ethernet) on 8 RJ-45 ports. With the increase in Po E powered devices requiring full power, notably wireless access points & IP cameras, the generous 140W power budget is much higher than many other products in its class without fan cooling. The switch can be used simply on a desk, or securely fitted to a wall / shelf, or rack mounted (1u) with the included mounting brackets. The Dray Tek Vigor Switch P2121 has 4 Gigabit SFP module ports which can be used instead of the corresponding RJ-45 ports Nos. 9-12. SFP slots are typically used for fibre transceivers. In comparison to copper (RJ-45) cables, using fibre for connectivity provides longer range & resilience from electrical interference. The SFP ports provides compatibility with your choice of SFP modules (not included) & therefore the most appropriate medium for your application. If you use the SFP slots, then the corresponding copper port is not active but the others remain available. The Vigor Switch P2121s Serial (RS232) Console port & SSH server allow for full configuration & management of the Vigor Switch through its command line interface (CLI). ...

24+4 Port Gigabit Managed Switch: 24 x RJ-45 Ethernet Ports with Po E+ 4 x Combo RJ-45 or SFP (Fibre Module) Ports Po E (Power-over-Ethernet) for IP phones, wireless access points, IP Cameras etc. Generous Power budget (340W total) 802.3af (Po E) & 802.3at (High Power Po E) 802.3az Power Saving 802.1q VLANs (Tag, Port & MAC-based) Qo S for Application traffic prioritisation Voice VLAN for Qo S (OUI Mode) Access Control List (ACL) Port Mirroring & Link Aggregation IGMP Snooping/ Querier (Up to 256 Multicast Groups) IPv 4 & IPv 6 Support Centrally managed or standalone operation Console Port The Vigor Switch P2280 is a high-performance, Gigabit smart switch with Po E+ (Power over Ethernet) on 24 RJ-45 ports (plus 4 additional Gigabit ports). With the increase in Po E powered devices requiring full power, notably wireless access points & IP cameras, the generous 340W power budget is much higher than many other products in its class. New Dray Tek OS & User Interface The Vigor Switch P2280 features our latest generation of Dray Teks own switch operating system which is used across our range of enhanced switches. This enables a consistent user-experience & look-&-feel so that once youre familiar with one model, the others feel the same. The new UI is designed to be intuitive & efficient, whilst providing access to all of the products advanced features. Enhanced Feature Set The P2280s

Specification is packed with advanced features to aid reliability & switching performance to your network & is ready for the next generation with both IPv 4 & IPv 6 support. The P2280 has 24 standard (RJ45/copper) Gigabit Ethernet Ports, all with Po E+ & four selectable ports (which can be set to either RJ-45 or SFP slots). Features for Quality of Service (Qo S), VLANs & network/switch security provide additional flexibility. Po E Devices The Vigor Switch P2280 is a Po E (Power over Ethernet) switch, providing power to any Po E-enabled device, most commonly IP phones, wireless access points or IP cameras over the Ethernet cable. As well as removing the need for local (at the desk) power supplies, making for tidier installations, Po E ensures power efficiency, providing only the power needed, as well as allowing for time schedules for powering up/down & remote rebooting. Power is provided only when required. Po E also allows for installation of devices where there is no mains power (particularly useful for wireless access points). The P2280 supports both standard Po E (802.3af) & High-Power Po E (802.3at) devices.

...

Key Features Designed for Centralised Management 405W Po E Power Budget Voice VLAN & Surveillance VLAN Energy-Efficient Po E Security DHCP Snooping: Limit DHCP server responses to only a specified port. IP Source Guard: Protects against address spoofing. Access Control List: Controls which packet types (IPv 4, IPv 6 & MAC) should pass between ports on the switch Hardware Monitoring It monitors & controls the switch’s temperature, voltages & fan status. Integrated email notification alerts for voltage anomalies, fan failure, temperature alarms, or Po E budget issues. Benefits: Prevents network failure. Ensures high availability. Voice VLAN & Surveillance VLAN Automatically assign VLANs & Qo S configuration to devices with matching MAC address OUI upon connection to the switch. Benefits: Allows easy prioritisation of Vo IP & IP Camera traffic & more control when implementing security policies. 405W Po E Power Budget Provides ample power through Ethernet, to each of its 44 Po E / Po E+ enabled Gigabit LAN ports. Benefits: It can easily power a large number of IP cameras, IP phones, wireless APs & other Po E devices. ...

Vigor Switch PQ2200xb is a 2.5 Gigabit L2+ Managed switch with 4 Po E++ 2.5 Gb E ports, 12 Po E+ 2.5 Gb E ports (total of 400W output) & 4 additional independent SFP+ 10 Gbps interfaces. Ideal for usage with devices where there are throughput demands beyond 1 Gbps such as Po E Wi-Fi 6 access points, high bandwidth video or network attached storage. Supported layer 3 features such as a DHCP Server &, VLAN Routing help with network stability & efficiency. The Vigor Switch PQ2200xb can be managed in a standalone mode or provisioned & monitored through the Vigor ACS management platform, or, a Dray Tek Vigor router’s Central Switch Management. Easily provision the VLAN configuration through the router & clone switch configurations. Drastically reduce the setup time required for a complex network, with VLANs spanning multiple switches. ...

28 Port Gigabit Ethernet Switch for A/V Designed to switch video feeds & data Uses HDMI-to-IP Extenders Two user modes: Select source for each screen or Select instant preset combinations Source selectable from browser or app Intuitive User interface & fast setup Admin & Regular User Accounts Applications include: Smart Home / AV Systems Hotels (Receptions, lounges, rooms) Pubs & Bars Retail & Betting Shops Leisure (Health Clubs etc.) Shopping Centres & Airports On the Vigor Switch V1281 the 28 ports can each be set as either a source (input) or output & any output (screen) can then receive the video from any of the inputs. One port is always reserved for data/PC access. In the simplest configuration, you can use the V1281 as a fixed distribution system
- one source distributing to up to 26 outputs (screens) but the real power & flexibility is in multiple sources & multiple outputs with each output selecting any of the sources. A smartphone app or the switchs own web interface allows easy source selection for any of the screens or projectors. The Vigot Switch app is currently available for i OS & Android as a free download from the App/ Play stores. You can have multiple set-top boxes (cable or satellite receivers), each one tuned to a different channel so, for example, in a pub its easy to switch different areas to different outputs or in a home environment, a user in any room can select one of many sources.
...