D-Link’s Gigabit Industrial Unmanaged Media Converter turns an Ethernet connection into fiber, allowing for ultra-fast long distance connections. The DIS-M100G-SW media converter is housed in a highly resistant IP30-rated metal casing to protect the media converter from harsh environmental conditions. Meanwhile, the fanless design extends the life of the DIS-M100G-SW while also being able to operate in a wide temperature range from -40°C up to 70 °C. For increased flexibility, the DIS-M100G-SW can also be mounted on a DIN rail or conveniently mounted on a solid surface wall. In addition, the DIS-M100G-SW supports dual power input which allows for a redundant power supply configuration to make sure the media converter continues to operate in the event of a primary power supply failure. Extend Your Network Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using D-Link’s converters you can change a twisted-pair Ethernet connection into a single-mode or multi-mode fiber connection that can go much further. Converters for distances of anywhere from 550 m to 80 km allow you to optimize your selection. No Wasted Space Its compact size fits anywhere & doesn’t require an entire rack. Measuring just 70 mm wide by 95 mm long by 26.1 mm in depth, with the total volume of one unit just 0.174 liters. This allows for convenient installation wherever it is needed, especially in limited space environments such as telecommunication cabinets or a distribution box. Plug & Play The media converters offered by D-Link include several industry-standard technologies that make them easy to operate, like 802.3u/x/ab. Auto-MDI/MDIX & Auto-Negotiation makes sure that your cable connection functions at the highest possible speed while remaining compatible. There’s no management software to configure – just simply connect the converter. ...

DIS&8209;N480&8209;48 480W 48VDC DIN Rail PSU 480W 48VDC DIN Rail PSU Input: 90 ~ 264VAC Output: 48 ~ 55V DC Din rail TS-35/7.5 or 15 mountable -20~70°C operating temperature Compatible with DIS-100G, DIS-300G ...

1-port Mini-GBIC SFP to 1000 Base SX Multi-Mode Fibre Transceiver up to 550 m -40 ~ 85°C operating temperature ...

D-Link DIS S310LX SFP (mini-GBIC) transceiver module Gig E 1000 Base-LX LC single-mode up to 10 km ...

D-Link DIS-100G-10S 8 Ports Ethernet Switch
- 2 Layer Supported
- Modular
- Twisted Pair, Optical Fiber
- DIN Rail Mountable



...

30W 24VDC Ultra Slim DIN Rail PSU Input: 85 ~ 264VAC Output: 21.6 ~ 29V DC Din rail TS-35/7.5 or 15 mountable -30~70°C operating temperature Compatible with DIS-100G, DIS-300G ...

60W 24VDC Input: 85 ~ 264VAC Output: 21.6 ~ 29V DC Din rail TS-35/7.5 or 15 mountable -30~70°C operating temperature Compatible with DIS-100G, DIS-300G ...

DIS&8209;N240&8209;48 240W 48VDC DIN Rail PSU 240W 48VDC Ultra Slim DIN Rail PSU Input: 90 ~ 264VAC Output: 48 ~ 55V DC Din rail TS-35/7.5 or 15 mountable -20~70°C operating temperature Compatible with DIS-100G, DIS-300G ...

The DKVM-2KU 2-port mini KVM (Keyboard, Video & Mouse) switch means that you can easily control 2 different PCs from a single set of keyboard, mouse, & VGA monitor, & to share a USB (Universal Serial Bus) device with 2 PCs. It

Includes:: 2 sets of built-in cables for ready connection to 2 PCs. If you have 2 PCs & need to use them at the same time, the DKVM-2KU saves you the money & space by allowing you to control your 2 computers from a set of keyboard, monitor & mouse. Or, you may have a better, bigger monitor & want to connect both PCs to it, the DKVM-2KU means that you can do this. 2 sets of cables are attached to the KVM switch ready for use, dispensing you of the need to prepare separate cables & connect them to the switch. The DKVM-2KU supports VGA, SVGA, & Multi Sync monitors at up to 2048 x 1536 resolution at 72 Hz refresh rate. Support for Microsoft Intelli Mouse is provided. There is also a control button located on the front panel that means that you can switch between the PCs. A USB (Universal Serial Bus) 2.0 port is built into this KVM switch to allow connection to a USB (Universal Serial Bus)-supported device or a USB (Universal Serial Bus) hub. This means that you can share your USB (Universal Serial Bus) printer, scanner, card reader or other devices among the 2 connected PCs. Please note: networking components such as switches, routers, KVM & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

D-Link DKVM-402
- Keyboard / video / mouse (KVM) cable 3m Please note: networking components such as switches, routers, UPS &
...