The exclusive Hive Fin technology used by Cryorig delivers an extreme performance allied with outstanding efficiency. The radical design employed in the H5 the flow of air is vastly accelerated whilst any turbulence is reduced. Leading to increased performance with silent & vibration free operation. The H5 is compatible with heat spreaders on both Intel & AMD platforms so can be used with most rigs & systems. Easy mounting system Cryorig continually push the boundaries with their tech & their exclusive Multiseg quick mount system. Very easy to install this heatsink cooler can be fitted in just a few minutes. If you are building a PC or upgrading your current rig the H5 will ensure your system runs cold & efficiently. Technical

Specification Heatsink

Specification Dimension (with fan )
- L98 mm x W143 mm x H160 mm Weight (with fan )
- 853 g Weight (without fan )
- 764 g Heat pipes
- 6mm heatpipe x 4 units Fin
- T = 0.4 mm ; Gap = 2.8 mm Fin Pcs
- 38 pcs Copper Base
- C1100 Pure copper nickel plated RAM Height Limit
- Limitless XT140 Dimension
- L140 mm x W140 mm x H13 mm Weight
- 89 g Rated Speed
- 700 ~ 1300 RPM ±10 % Noise Level
- 20 ~ 24 d BA Air Flow
- 65 CFM
















...

Breaking Design Molds, Efficiency by Innovation CRYORIG H Series coolers feature our proprietary Hive Fin™structure. This design allows for a combination of Jet Fin Acceleration™ and Turbulence Reduction, as well as strengthening structural strength of the fin stacks. Combined together, the Hive Fin™ design brings cool innovation. Air Exhaust Acceleration, Hot Air Cooled Fast By utilizing a larger air intake & narrower air exhaust section on the fins, compresses the air to move faster while exiting the heatsink. Jet Fin Acceleration System™ carries the hot air out of the system faster & more efficiently. Extreme Efficiency, Turbulence Reduction System Utilizing a bee hive shaped structure at the front air intake of the heatsink, lowers air turbulence & straightens out the airflow. Assisting airflow to move directly through the full length of the heatsink & carrying out hot air. Optimized Heatpipe Positioning, Total CPU Coverage The H7’s Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, & enhanced alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity. Extra Air, Extra Performance Quad Air Inlet™ CRYORIG’s proprietary Quad Air Inlet™ system features four strategically placed aerodynamic air inlet that allows for extra air intake. The additional air intake allows the QF series fan to have a higher air output volume for its fan diameter, which equals better temperatures for your CPU heatsink & more air exchanged for your system case. Unmatched Compatibility, Zero RAM Interference Focusing on providing the widest range of compatibility, the H7 utilizes an asymmetric slanted heatpipe layout to move the heatsink away from the RAM zone, Offering optimal compatibility for RAM with tall heat spreaders on both Intel 115X and AMD platforms Patent Pending X-Bar™ Quick Mount System, Fast, Easy & Secure Our new patent pending X-Bar™ Quick Mount System follows CRYORIG’s renowned mounting system design, & provides a quick & secure solution on both Intel & AMD platforms. The X-Bar™ system’s dedicated backplate is made from fiber glass augmented PBT, for higher tensile strength, resistance to heat & is more easily recyclable than other plastics. The backplate protects the mainboard from excessive stress that may come from the mounted heatsink, & also provides a solid base for your fast & secure installation. The Compact Tower That Fits The CRYORIG H7 has compact compatibility written in it’s design. Only 145mm in height the H7 is one of the smallest 120mm fan class tower heatsinks on the market. The H7 will fit in almost all mid-tower PC chassis. The H7 can deliver much needed tower grade cooling performance in tight spaces. ...

CPU tower cooler in cooper & aluminium for best cooling performance Suitable for installation with oversized RAM modules Specially arranged honeycomb-shaped cooling fins ensure optimum removal of residual heat Suitable for processors with up to 160 Watt TDP

Height: 145 mm Uncomplicated installation Optimised Air Flow for More Efficient Cooling With the CPU cooler H7 Quad Lumi, Cryorig relies on four 6mm thick heatpipes that connect the nickel-plated copper base plate to the tower of the heat sink. The special feature is the design of the slats. The cooling fins are honeycomb-shaped & constricted towards the outlet. The honeycomb shape prevents turbulence & at the same time ensures that the air flows evenly through the fins. The constriction in addition ensures an optimised air flow, called Jet Fin Acceleration System by Cryorig. This allows the heated air to be removed from the tower cooler more quickly. With the asymmetrical & inclined arrangement of the heatpipes, the heat sink is offset in such a way that it does not protrude over the RAM modules. This means that even memory with large heat sinks can be installed. For mounting to the backplate, the Cryorig H7 Quad Lumi has an X- Bar cross-shaped mount that is compatible with most AMD & Intel sockets. RGB-LED Lighting As an effective anti-vibration measure, four rubber dampeners are embedded in the 120mm fan at the corners. This dampens the vibration transmission of the fans to the fins. The Fan QF120 LED has extraordinarily quiet bearings so that the noise level of the entire cooler is low 25 d B (A). In addition, the QF120 LED's housing has four additional ventilation slots, which further increase the performance of the fan. The RGB illumination of the fan can be controlled by software. In addition to the usual effects such as Breathing, it can also be used to adjust reactive effects that react to changes in temperature, for example. Thanks to its outstanding performance & efficiency, the CPU tower cooler Cryorig H7 is suitable for processors with a 160 Watt TDP (Thermal Design Power).

...

CPU Tower-style cooler in copper & aluminium for optimal cooling performance Designed for compatibility with larger RAM modules Specially designed honeycomb-shaped cooling fins provide optimal thermal conductivity of unwanted waste heat Equipped with two fans, designed for processors up to 150 Watt TDP

Height: 145 mm Straightforward installation Optimised Airflow for enhanced Cooling Efficiency The H7 Plus from Cryorig utilises three 6mm thick heatpipes that connect the nickel-plated copper baseplate with the tower heatsink. What makes this design special however, is the design of the fins. The cooling fins draw inspiration from the honeycomb & this helps prevent unwanted air turbulence, thereby helping air flow more smoothly through them. The way the cooler narrows also helps to optimise the flow of exhaust air outwards, Cryorig calls this their Jet Fin Acceleration System. This means the warm air leaves the tower cooler at higher speeds. With the asymmetric & tilted structure of the heatpipes, the cooler does not impinge on the space needed for RAM modules. As a result, even RAM modules with tall or custom heatsinks will fit with ease. The Cryorig H7 Plus utilises an X-bar, a cross-shaped backplate attachment, that ensures excellent compatibility with the majority of sockets from AMD & Intel. Cryorig has really thought of everything when it comes to this cooler, & that approach extends to the anti-vibration technology they've included, specifically the 120mm fans include four rubber dampeners embedded into the corners. This means the force of the fans spinning is not transferred into the fins themselves & is dampened. The QF120 fans themselves include quiet bearings so as to ensure that the total noise output of the cooler is a paltry 25 d B (A). Moreover, the QF120

Includes:: four additional air vents that increase the fans' performance even further. Thanks to their unparalleled performance & efficiency, the Cryorig H7 Plus is fully capable of cooling CPUs with a TDP (Thermal Design Power) of up to 150 Watts.



...

Increased Air Exhaust Speed, Higher Cooling Efficiency The CRYORIG M9i/M9a features CRYORIG proprietary Jet Fin Acceleration System™. By creating a structure of alternated fin stacks, the M9i/M9a has a wider air intake area & higher fin density air exhaust area to squeeze out air, heated air exits the system faster. True Copper Base Plate, Increased Cooling Efficiency CRYORIG’s M9i/M9a while being an entry level product, comes with a True Copper Base Plate. Copper base plates can effectively spread heat to all heatpipes & allows for increased heat contact area. In comparison on a heatsink without a True Copper Base Plate, the heat source from the CPU die will not efficiently reach the outer heatpipes & the aluminum material holding heatpipes also provide lackluster contact & heat conduction with the heatpipes. Together with the highly heat conductive C1100 Pure Copper, further increasing heat conduction efficiency of the whole cooler. CRYORIG’s Smallest Tower to Date, Minimal Height, Maximum Performance With a total height of 124.6mm, the CRYORIG M9i/M9a is the smallest CRYORIG Tower cooler. Featuring the same materials & cooling technology found on all CRYORIG tower coolers, there are no compromises or downgrades to quality & performance. It’s the perfect entry product to PC Building, Enthusiast Grade Cooling, & Overclocking. Zero Interference, Any RAM Any Height Focusing on providing the widest range of compatibility, the M9i/M9a’s small size moves the heatsink away from the RAM & inside the *CPU Keep Out Zone, offering optimal compatibility for RAM with tall heat spreaders on both Intel 115X & AMD platforms. * The CPU Keep Out Zone is a design guideline set by both Intel & AMD. It is set around the CPU, & dictates no components over a certain height can be placed there. 33% Cooler Than Stock With Tower Cooling Technology With the help of CRYORIG proprietary cooling technology & a more efficient heatpipe based tower design, the CRYORIG M9i/M9a out performs stock cooling options while using less RPM & generating less noise. Augmented Backplate System, Safe & Secure Support The M9i/M9a like all CRYORIG tower heatsinks

Includes:: a backplate support system that evenly spreads out the heatsink mounting force through the whole surface of the backplate, & protecting your mainboard. Made from fiberglass augmented PBT material, it provides just the right amount of tensile strength for the best mounting force & support for your system. Fast Easy & Secure, Install Within Minutes With our new Multi Seg™ Light quick mounting systems, the M9i/M9a is extremely easy to mount. Watch how to install your M9 within minutes.

...

For the ultimate in air-cooling technology look no further than the Cryorig R1. Renowned for their high performance components Cryorig produce tech that delivers amazing cooling. & this dual power heatsink comes complete with two XF140 140mm fans for maximum performance. Ideal for all computer builders If you are into PC modding, overclocking or gaming incorporating a top of the class cooling system is essential. And with the Cryorig R1 you will have the ideal system that can cope with even the most challenging environments. Great performance The innovative design of the tower stack generates ultra-fast exhaust air speed to dispel warm air. With more heatpipes optimised for maximum performance it’s no wonder the R1 is the premium product in the Cryorig cooling range. &, with noiseless & vibration free operation, it is perfect for any new PC build or overhaul. Easy installation Installing the R1 into your system is easy thanks to the comprehensive installation guide that is included in the box. &, with fittings included for both AMD & Intel processors fitting can be completely in five simple steps. Your new cooling system will be up & running in moments. Technical

Specification Heatsink Dimension (with fan ) L142.4 mm x W140 mm x H168.3 mm Weight (with fan ) 1282 g Weight (without fan ) 936 g Heat pipes 6mm heatpipe x 7 units Front Fin T = 0.4 mm ; Gap = 2.4 mm Front Fin Pcs 42 pcs Rear Fin T = 0.4 mm ; Gap = 1.8 mm Rear Fin Pcs 53 pcs Copper Base C1100 Pure copper nickel plated Distance From Center 40 mm RAM Height Limit 30 ~ 3.5cm (Fan position adjustable) XF140 fans Dimension L140 mm x W140 mm x H25.4 mm Weight 156 g Rated Speed 700 ~ 1300 RPM ±10 % Noise Level 19 ~ 23 d BA Air Flow 76 CFM Motherboard compatibility 2011 Socket LGA 1366 Socket LGA 1150 Socket LGA 1155 Socket LGA 1156 Socket LGA 775 Socket LGA FM1 Socket FM 2/+ Socket AM2/+ Socket AM3/+ Socket

...

Designed for added compatibility the R1 universal dual tower CPU heatsink with white frame & black fins is optimised for use with both Intel & AMD platforms. Cryorig produces a range of high performance & ultra-reliable cooling components that have been specifically designed for PC modding & overclocking. PC builders looking for the ultimate cooling solution will enjoy the R1 & the great performance it delivers. Envelope pushing technology Optimised with Cryorig’s exclusive Heatpipe Convex-Align technology & accelerated air exhaust system the R1 universal dual tower delivers an outstanding performance. & the R1 not only keeps your system cooler for longer it does so also silently. The 140mm fans are ultra-quiet thanks to High Precision Low Noise technology. Once your system is up & running you won’t hear a thing as fan noise & vibration will be a thing of the past. Five minute fix So easy to install on both AMD & Intel platforms the R1 comes complete with all the fixings you need. There is also a handy installation guide that will have your new cooling system installed within five minutes. Technical

Specification Heatsink Dimension (with fan )
- L128.5 mm x W140 mm x H168.3 mm Weight (with fan )
- 1181 g Weight (without fan )
- 936 g Heat pipes
- 6mm heatpipe x 7 units Front Fin
- T = 0.4 mm ; Gap = 2.4 mm Front Fin Pcs
- 42 pcs Rear Fin
- T = 0.4 mm ; Gap = 1.8 mm Rear Fin Pcs
- 53 pcs Copper Base
- C1100 Pure copper nickel plated Distance From Centre
- 35.5 mm RAM Height Limit
- Limitless XF140 Dimension
- L140 mm x W140 mm x H25.4 mm Weight
- 156 g Rated Speed
- 700 ~ 1300 RPM ±10 % Noise Level
- 19 ~ 23 d BA Air Flow
- 76 CFM XT140 Dimension
- L140 mm x W140 mm x H13 mm Weight
- 89 g Rated Speed
- 700 ~ 1300 RPM ±10 % Noise Level
- 20 ~ 24 d BA Air Flow
- 65 CFM Motherboard compatibility 2011 Socket LGA 1366 Socket LGA 1150 Socket LGA 1155 Socket LGA 1156 Socket LGA 775 Socket LGA FM1/2 Socket AM2/+ Socket AM3/+ Socket






















...

The CRYORIG CP5 combines high grade Thermal Performance & a high Particle Density. Slightly higher in viscosity but still easily spread, the CRYORIG CP5 is best suited for high-end overclocking & seasoned system builders. CP5

Specification Colour: Grey

Volume: 4g Thermal Conductivity: 9.3 Thermal Impedance: 0.007



...

25% Cooler Than Stock Harnessing the Power Of Heatpipe Technol Thanks to CRYORIG proprietary manufacturing processes the CRYORIG C7 comes packed with a staggering total of 4 high performance copper heatpipes. CRYORIG heatpipe tech allows the C7 to be 25% cooler while being 20% quieter than a reference stock heatsink, while being the same size. Shorter is Better, 47mm Tall, One Size Fits All The CRYORIG C7 was designed to be a solution for all cases & PC systems. With a height of 47mm fan included, the C7 fist into almost all aftermarket case, while packing cooling tech only found on full sized tower coolers. Small yet powerful. Zero Interference, A Cooler That Fits Anywhere The CRYORIG C7 has a specifically designed width & length that safely complies with the CPU * Keep Out Zone. The C7 is a guaranteed fit, with no RAM or PCI-E card interference period. * The CPU Keep Out Zone is a design guideline set by both Intel & AMD. It is set around the CPU, & dictates no components over a certain height can be placed there. Quad Air Inlet™ System, Adding Extra Air Extending Performance A super compact cooler like the C7, needs as much cooling tech as possible. The C7’s 92mm fan features CRYORIG’s proprietary Quad Air Inlet™ System that allows for extra air intake from the four corners of the frame, more airflow more cool. Built In Absorbers, Low Noise Low Maintenance The C7’s proprietary 92mm fan comes with built in Acoustic Vibration Absorbers. The same found on the award winning R1 series ultra high-end dual tower cooler. By insulating the fan & metal fins, it effectively eliminates all unnecessary vibration. Fast Easy & Secure, Install Within Minutes With the newest addition to CRYORIG’s award winning mounting systems, the C7 features CRYORIG’s easiest mounting kit to date. Watch how to install your C7 in 3 steps & within minutes, & with all needed tools included right in the box. ...

Always pushing the envelope Cryorig have developed the ideal cooling systems for modding, overclockers & gamers. If you are building your own PC or upgrading an existing rig it is essential to have a first class cooling system. & this Cryorig 140mm fan delivers the exceptional performance & faultless reliability demanded by all PC builders. High Precision Low Noise The XF140 benefits from Cryorig’s HPLN bearing which allows super-fast performance with noiseless operation. Included with the fan are three sets of coloured acoustic vibration absorbers with red, white & black pegs. Not only do these absorbers reduce the noise generated by the fan they also look incredibly cool when the fan is operating. Technical

Specification Dimension L140 mm x W140 mm x H25.4 mm Weight 156 g Rated Speed 700 ~ 1300 RPM ±10 % Noise Level 19 ~ 23 d BA Air Flow 76 CFM

...