Key Features Retractable design protects the connector from dirt & damage Capacities up to 128GB* for photos, music, documents & other files

Includes:: San Disk Secure Access password protection to help keep your files private Five-year warranty With capacities up to 128GB*, the Cruzer Snap™ USB (Universal Serial Bus) flash drive is a simple & portable storage device. Whether you’re headed back to school, off to work or on vacation, it has enough space to carry your photos, songs & other files. It also

Includes:: a retractable design that helps keep the USB (Universal Serial Bus) connector safe, while the included password-protection software helps keep your private files secure



...

With capacities up to 128GB*, the Cruzer Snap™ USB (Universal Serial Bus) flash drive is a simple & portable storage device. Whether you’re headed back to school, off to work or on vacation, it has enough space to carry your photos, songs & other files. It also

Includes:: a retractable design that helps keep the USB (Universal Serial Bus) connector safe, while the included password-protection software helps keep your private files secure

...

Extra Air, Extra Performance Quad Air Inlet™ CRYORIG’s proprietary Quad Air Inlet™ system features four strategically placed aerodynamic air inlet that allows for extra air intake. The additional air intake allows the QF Series fan to have a higher air output volume for its fan diameter, which equals better temperatures for your CPU heatsink & more air exchanged for your system case. Pleasing Your Ears, With Acoustic Engineering QF Series PWM fans feature CRYORIG’s HPLN™ (High Precision Low Noise) bearing system, offering stable & precision rotation eliminating excess vibration & noise. Ultra Wide RPM Range, Fine Tune Your Fan Profile Featuring four pin Pulse Width Modification (PWM) RPM spin speed control, QF Series fans offer a ultra wide range of RPM settings. This wide RPM range allows users to fine tune their fan speed directly through mainboard bios settings. Roughly 33% more selection range than the system fans from competitors. *some RPM speeds are only available through PWM control. Vibration Absorbers, Included Soaking Up Every Last Bit of Noise Frame vibration causes unwanted noise. This is why all QF Series fan come with rubberized Vibration Absorbers to nullify fan vibration. Vibration Absorbers are already built directly into the fan frame, no extra work necessary. ...

This top flow CPU heatsink (with white frame) has been specifically designed for ITX systems. This low profile super cooler delivers exceptional performance no matter how intense the environment. Keep your valuable CPU cooled with this top of its class heatsink from Cryorig. Install in minutes The C1 is easy to install. Using Cryorig’s quick mount system & the kit included in the box you can have your new CPU cooler installed in five minutes. It’s that simple. &, if you do get stuck, there is a helpful installation guide supplied with the cooler. Technical specifications Heatsink Dimension (with fan )
- L144.5 mm x W140 mm x H74 mm Weight (with fan )
- 628 g Weight (without fan )
- 539 g Heat pipes
- 6mm heatpipe x 6 units Top Fin
- T = 0.4 mm ; Gap = 1.8 mm Top Fin Pcs
- 56 pcs Bottom Fin
- T = 0.4 mm ; Gap = 1.4 mm Bottom Fin Pcs
- 35 pcs Copper Base
- C1100 Pure copper nickel plated RAM Height Limit
- 42 XT140 Dimension
- L140 mm x W140 mm x H13 mm Weight
- 89 g Rated Speed
- 700 ~ 1300 RPM ±10 % Noise Level
- 20 ~ 24 d BA Air Flow
- 65 CFM














...

Low profile copper & aluminum CPU cooler for best cooling performance
- Suitable for installation with oversized RAM modules
-

...

Breaking Design Molds, Efficiency by Innovation CRYORIG H Series coolers feature our proprietary Hive Fin™structure. This design allows for a combination of Jet Fin Acceleration™ and Turbulence Reduction, as well as strengthening structural strength of the fin stacks. Combined together, the Hive Fin™ design brings cool innovation. Air Exhaust Acceleration, Hot Air Cooled Fast By utilizing a larger air intake & narrower air exhaust section on the fins, compresses the air to move faster while exiting the heatsink. Jet Fin Acceleration System™ carries the hot air out of the system faster & more efficiently. Extreme Efficiency, Turbulence Reduction System Utilizing a bee hive shaped structure at the front air intake of the heatsink, lowers air turbulence & straightens out the airflow. Assisting airflow to move directly through the full length of the heatsink & carrying out hot air. Optimized Heatpipe Positioning, Total CPU Coverage The H7’s Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, & enhanced alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity. Extra Air, Extra Performance Quad Air Inlet™ CRYORIG’s proprietary Quad Air Inlet™ system features four strategically placed aerodynamic air inlet that allows for extra air intake. The additional air intake allows the QF series fan to have a higher air output volume for its fan diameter, which equals better temperatures for your CPU heatsink & more air exchanged for your system case. Unmatched Compatibility, Zero RAM Interference Focusing on providing the widest range of compatibility, the H7 utilizes an asymmetric slanted heatpipe layout to move the heatsink away from the RAM zone, Offering optimal compatibility for RAM with tall heat spreaders on both Intel 115X and AMD platforms Patent Pending X-Bar™ Quick Mount System, Fast, Easy & Secure Our new patent pending X-Bar™ Quick Mount System follows CRYORIG’s renowned mounting system design, & provides a quick & secure solution on both Intel & AMD platforms. The X-Bar™ system’s dedicated backplate is made from fiber glass augmented PBT, for higher tensile strength, resistance to heat & is more easily recyclable than other plastics. The backplate protects the mainboard from excessive stress that may come from the mounted heatsink, & also provides a solid base for your fast & secure installation. The Compact Tower That Fits The CRYORIG H7 has compact compatibility written in it’s design. Only 145mm in height the H7 is one of the smallest 120mm fan class tower heatsinks on the market. The H7 will fit in almost all mid-tower PC chassis. The H7 can deliver much needed tower grade cooling performance in tight spaces. ...

CPU tower cooler in cooper & aluminium for best cooling performance Suitable for installation with oversized RAM modules Specially arranged honeycomb-shaped cooling fins ensure optimum removal of residual heat Suitable for processors with up to 160 Watt TDP

Height: 145 mm Uncomplicated installation Optimised Air Flow for More Efficient Cooling With the CPU cooler H7 Quad Lumi, Cryorig relies on four 6mm thick heatpipes that connect the nickel-plated copper base plate to the tower of the heat sink. The special feature is the design of the slats. The cooling fins are honeycomb-shaped & constricted towards the outlet. The honeycomb shape prevents turbulence & at the same time ensures that the air flows evenly through the fins. The constriction in addition ensures an optimised air flow, called Jet Fin Acceleration System by Cryorig. This allows the heated air to be removed from the tower cooler more quickly. With the asymmetrical & inclined arrangement of the heatpipes, the heat sink is offset in such a way that it does not protrude over the RAM modules. This means that even memory with large heat sinks can be installed. For mounting to the backplate, the Cryorig H7 Quad Lumi has an X- Bar cross-shaped mount that is compatible with most AMD & Intel sockets. RGB-LED Lighting As an effective anti-vibration measure, four rubber dampeners are embedded in the 120mm fan at the corners. This dampens the vibration transmission of the fans to the fins. The Fan QF120 LED has extraordinarily quiet bearings so that the noise level of the entire cooler is low 25 d B (A). In addition, the QF120 LED's housing has four additional ventilation slots, which further increase the performance of the fan. The RGB illumination of the fan can be controlled by software. In addition to the usual effects such as Breathing, it can also be used to adjust reactive effects that react to changes in temperature, for example. Thanks to its outstanding performance & efficiency, the CPU tower cooler Cryorig H7 is suitable for processors with a 160 Watt TDP (Thermal Design Power).

...

CPU Tower-style cooler in copper & aluminium for optimal cooling performance Designed for compatibility with larger RAM modules Specially designed honeycomb-shaped cooling fins provide optimal thermal conductivity of unwanted waste heat Equipped with two fans, designed for processors up to 150 Watt TDP

Height: 145 mm Straightforward installation Optimised Airflow for enhanced Cooling Efficiency The H7 Plus from Cryorig utilises three 6mm thick heatpipes that connect the nickel-plated copper baseplate with the tower heatsink. What makes this design special however, is the design of the fins. The cooling fins draw inspiration from the honeycomb & this helps prevent unwanted air turbulence, thereby helping air flow more smoothly through them. The way the cooler narrows also helps to optimise the flow of exhaust air outwards, Cryorig calls this their Jet Fin Acceleration System. This means the warm air leaves the tower cooler at higher speeds. With the asymmetric & tilted structure of the heatpipes, the cooler does not impinge on the space needed for RAM modules. As a result, even RAM modules with tall or custom heatsinks will fit with ease. The Cryorig H7 Plus utilises an X-bar, a cross-shaped backplate attachment, that ensures excellent compatibility with the majority of sockets from AMD & Intel. Cryorig has really thought of everything when it comes to this cooler, & that approach extends to the anti-vibration technology they've included, specifically the 120mm fans include four rubber dampeners embedded into the corners. This means the force of the fans spinning is not transferred into the fins themselves & is dampened. The QF120 fans themselves include quiet bearings so as to ensure that the total noise output of the cooler is a paltry 25 d B (A). Moreover, the QF120

Includes:: four additional air vents that increase the fans' performance even further. Thanks to their unparalleled performance & efficiency, the Cryorig H7 Plus is fully capable of cooling CPUs with a TDP (Thermal Design Power) of up to 150 Watts.



...

Increased Air Exhaust Speed, Higher Cooling Efficiency The CRYORIG M9i/M9a features CRYORIG proprietary Jet Fin Acceleration System™. By creating a structure of alternated fin stacks, the M9i/M9a has a wider air intake area & higher fin density air exhaust area to squeeze out air, heated air exits the system faster. True Copper Base Plate, Increased Cooling Efficiency CRYORIG’s M9i/M9a while being an entry level product, comes with a True Copper Base Plate. Copper base plates can effectively spread heat to all heatpipes & allows for increased heat contact area. In comparison on a heatsink without a True Copper Base Plate, the heat source from the CPU die will not efficiently reach the outer heatpipes & the aluminum material holding heatpipes also provide lackluster contact & heat conduction with the heatpipes. Together with the highly heat conductive C1100 Pure Copper, further increasing heat conduction efficiency of the whole cooler. CRYORIG’s Smallest Tower to Date, Minimal Height, Maximum Performance With a total height of 124.6mm, the CRYORIG M9i/M9a is the smallest CRYORIG Tower cooler. Featuring the same materials & cooling technology found on all CRYORIG tower coolers, there are no compromises or downgrades to quality & performance. It’s the perfect entry product to PC Building, Enthusiast Grade Cooling, & Overclocking. Zero Interference, Any RAM Any Height Focusing on providing the widest range of compatibility, the M9i/M9a’s small size moves the heatsink away from the RAM & inside the *CPU Keep Out Zone, offering optimal compatibility for RAM with tall heat spreaders on both Intel 115X & AMD platforms. * The CPU Keep Out Zone is a design guideline set by both Intel & AMD. It is set around the CPU, & dictates no components over a certain height can be placed there. 33% Cooler Than Stock With Tower Cooling Technology With the help of CRYORIG proprietary cooling technology & a more efficient heatpipe based tower design, the CRYORIG M9i/M9a out performs stock cooling options while using less RPM & generating less noise. Augmented Backplate System, Safe & Secure Support The M9i/M9a like all CRYORIG tower heatsinks

Includes:: a backplate support system that evenly spreads out the heatsink mounting force through the whole surface of the backplate, & protecting your mainboard. Made from fiberglass augmented PBT material, it provides just the right amount of tensile strength for the best mounting force & support for your system. Fast Easy & Secure, Install Within Minutes With our new Multi Seg™ Light quick mounting systems, the M9i/M9a is extremely easy to mount. Watch how to install your M9 within minutes.

...

CPU tower cooler in copper & aluminium Two fans for optimal cooling performance Specially designed cooling fins for optimal heat dissipation Designed for processors up to 130 Watt TDP Compact, designed for installation with large RAM modules Compatible with current AMD- & Intel sockets Straightforward installation Compact CPU Cooler with Excellent Cooling Performance The M9 CPU cooler from Cryorig utilises three 6mm thick copper heatpipes to connect the nickel-plated copper base plate with the fins of the heatsink. Thanks to the use of premium quality materials, this compact CPU tower offers 33 percent better performance than the stock cooler, & all this in a relatively small form factor
- for a tower style cooler in any case. Because the CPU cooler is so small, it also does not impinge on the space required by RAM modules or expansion cards. Both 92 mm fans have exceptionally quiet bearings, meaning that the total noise produced by the cooler amounts to just 26.4 d B (A). Thanks to their excellent performance & efficiency, the CPU tower cooler is suited for cooling processors up to 130 Watt TDP (Thermal Design Power).
...