Profilers with Shank mounted bearings for guidance for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight & curved work. For profiling & rebating applications only. NOT for plunge cutting or grooving. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/4 in. Shank. Angle A = 90 D = 15.9 mm. C = 25 mm. ...

Profilers with Shank mounted bearings for guidance for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight & curved work. For profiling & rebating applications only. NOT for plunge cutting or grooving. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/4 in. Shank. Angle A = 90 D = 12.7 mm. C = 9.5 mm. ...

Profilers with Shank mounted bearings for guidance for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight & curved work. For profiling & rebating applications only. NOT for plunge cutting or grooving. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten/4 in. Shank. Angle A = 90 D = 15.9 mm. C = 19.1 mm. ...

Ovollo & rounding over bearing guided cutters are ideal for curved work they can be used on natural timbers man-made particles & fibre boards. Popular uses include edging window frames glazing bars cabinets table tops pencil rounds trophies shelves & fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings larger bearing removes the quirk producing a round over profile. Tooling: T.C.T. 1/4 in. Shank. R = 7.9 mm. D = 28 mm. C = 12.7 mm. Bearings = 9.5 & 12.7 mm. ...

Profilers with Shank mounted bearings for guidance for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight & curved work. For profiling & rebating applications only. NOT for plunge cutting or grooving. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90 D = 19.1 mm. C = 25.4 mm. ...

90 degree Rose pattern countersink produced in HSS & should not be confused with carbon steel types. They are designed for countersinking mild steel iron & plastics. Ref 49/50 is made from special grade HSS & can be used at high speeds (up to 10000 rpm). It is popular for countersinking aluminium alloy. HSS. 1/4 in. Shank. 12.7 mm. ...

Tooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots. All aluminium tooling should be used with a coolant wax stick or lubricant. Material should be securely clamped, tooling should be used with a coolant wax stick or lubricant. HSSE. One Flute helical Plunge-slotting bit. 8 mm. Shank. D = 4 mm. Diameter: C = 16 mm. Depth of Cut. OL = 90 mm. ...

Tooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots. All aluminium tooling should be used with a coolant wax stick or lubricant. Material should be securely clamped, tooling should be used with a coolant wax stick or lubricant. HSSE. One Flute helical Plunge-slotting bit. 8 mm. Shank. D = 8 mm. C = 14 mm. OL = 120 mm. ...

Product Description Trend helical cutter 50/05 Tooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensures a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8mm Shank.D = 5 mm C = 12 mm OL = 60 mm Product Description Trend 50/05 x 1/4 HSSE Helical Plunge Bit 5 mm TRE500514HSETooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8 mm Shank.D = 5 mm C = 12 mm OL = 60 mm TRE500514HSE ...

Product Description Trend helical cutter 50/05 Tooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensures a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8mm Shank.D = 5 mm C = 12 mm OL = 60 mm Product Description Trend 50/05 x 8mm HSSE Helical Plunge Bit 5 mm TRE50058HSETooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8 mm Shank.D = 5 mm C = 12 mm OL = 60 mm TRE50058HSE ...