The C2G Accessory Kit for the HDMI projector at long distances: This HDMI accessory kit contains the cables you need to be prepared in a variety of situations. It's an ideal kit for scenarios at home or at the office when you are dealing with standard HDMI projectors. It
Includes::
- 10m HDMI cable
- 10m HD15 (VGA) cable
- 2m USB (Universal Serial Bus) cable
- 10m audio cable Accessory Kit Contains: 1, 10m Select Standard Speed HDMI with Ethernet Cable
- Black 1, 10m Pro Series HD15 UXGA Male/ Male Monitor Cable
- Black 1, 2m USB (Universal Serial Bus) 2.0 A Male to A Female Extension Cable
- White 1, 10m Velocity One 3.5mm Stereo Male to Two RCA Male Y-Cable
- Blue








...

Rapid Run is designed to be the standard for in-wall audio/video installations. The Rapid Run system empowers you to customise your installation to create your own ideal audio/video solution. Break-away flying leads & wall plates ensure flexible, efficient, high quality connections for all types of equipment. Ideal for educational & institutional installations, this wall plate receives PC video, 3.5mm stereo audio & RCA composite audio/video from one cable. It is commonly used at the teachers station with the display (projector) end of classroom setups with the corresponding flying lead used. Constructed from aluminum for durability, this wall plate has a locking connector that enables the integrator to save valuable space inside the surface mount or electrical box that typically is already packed with cables. The included keystone bezels will work with most brands of keystone inserts. Please Note: Each complete Rapid Run solution requires a break-away flying lead or wall plate to terminate each end of the runner cable. For each runner you will need (2) break-away flying leads, (2) wall plates, OR (1) break-away flying lead & (1) wall plate.
Colour: Grey UPC: 757120871002 Warranty: Lifetime Vendor: C2G Weight: 0.213kg • Colour Code: Yellow (for use with PC Runners) • Supports transmission of RGBHV signals (Does not support data-bit transmission), 3.5mm stereo audio, & RCA composite audio/video • Fits into a standard single gang J-box • 2 Keystones
...

Constructed from 28 AWG silver satin wire, this straight through-pinned cable is ideal for cost-saving voice & data applications not requiring high data rates. Connector 1: RJ11 (6P4C) Straight Connector 2: RJ11 (6P4C) Straight Connector 1: (1) RJ-11 Male Connector 2: (1) RJ-11 Male ...

Cable length: 3 m Connector (s): RJ-11 Cable

Colour: Grey Weight: 10 g Gender type: male/male ...

Technical Description: C2G SC-SC 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH)
- Network cable
- SC multi-mode

...

Technical Description: C2G SC-SC 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH)
- Network cable
- SC multi-mode

...

Technical Description: C2G SC-SC 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH)
- Network cable
- SC multi-mode

...

Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...