Constructed from 28 AWG silver satin wire, this straight through-pinned cable is ideal for cost-saving voice & data applications not requiring high data rates. Connector 1: RJ11 (6P4C) Straight Connector 2: RJ11 (6P4C) Straight Connector 1: (1) RJ-11 Male Connector 2: (1) RJ-11 Male ...

Cable length: 3 m Connector (s): RJ-11 Cable

Colour: Grey Weight: 10 g Gender type: male/male ...

Technical Description: C2G SC-SC 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH)
- Network cable
- SC multi-mode

...

Technical Description: C2G SC-SC 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH)
- Network cable
- SC multi-mode

...

Technical Description: C2G SC-SC 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH)
- Network cable
- SC multi-mode

...

Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Technical Description: C2G SC-SC 9/125 OS1 Duplex Singlemode PVC Fiber Optic Cable (LSZH)
- Patch cable
- SC single mode (M)
-


...

C2G SC-ST 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH) Network cable ST multi-mode (M) to SC multi-mode (M) 1 m fibre optic 50 / 125 micron OM3 halogen-free aqua Connector 1: (1) SC Male Connector 2: (1) ST Male LSZH rated fibre optic cable designed for 10 G Base-SR & 10 G Base-LRM ports & equipment Low Smoke Zero Halogen (LSZH / LS0H) jacket Product Description This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10 G Base-SR, 10 G Base-LRM, SFP+ & QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic & corrosive gases in poorly ventilated spaces & other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment & the performance headroom required to support LED & VCSEL laser light sources, and 10 Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. Main Specifications Product Description C2G SC-ST 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH)
- network cable
- 1 m
- aqua Type Network cable
- OM3 Technology Fibre optic Type of Fibre Optics Multimode Features Halogen-free Length 1 m Core / Cladding Diameter 50 / 125 micron Connector 2 x ST multi-mode
- male Connector (Second End) 2 x SC multi-mode
- male Colour Aqua Manufacturer Warranty Limited lifetime warranty





...