80 PLUS BRONZE Certified With up to 87% efficiency (230V AC, 50% load), it`s 80 PLUS BRONZE certified & guarantees higher efficiency compared to uncertified products. &8251; 80 PLUS is an energy efficiency certification program administered by Ecos Consulting of the U.S.A. Two-Forward Switching Design The Two-Forward Switching Design minimizes switching loss & internal heat for enhanced reliability & stability. ATX12V v 2.3 The latest PSU design standard is incorporated for compatibility with a wide range of CPUs, motherboards, & graphic cards. Quad Rail +12V DC Output Four independent +12V outputs for core components facilitate highly stable operation. Dual Graphics Card Support 6-Pin & 6+2 Pin PCI-E Connectors are provided for dual graphic card setup such as SLI & CF. (Dual graphics card may or may not be supported depending on the graphics card specifications.) Less Than 1W Standby Power Consumption The energy efficient Green IC circuitry consumes much less standby power (less than 1W) compared to other PSU`s without this feature. Meets Er P 2010 Lot 6 Standby Power Standards (Er P: Energy-related Product) This product complies with Er P 2010 Lot 6, the Standby Power & High Energy Efficiency standards of the European Union. Ultra Quiet 120mm Sleeve Bearing Ultra quiet 120mm Sleeve Bearing fan increases airflow while minimizing noise for a superbly quiet computing environment. Active PFC for enhanced Power Factor & Reduced Harmonics By implementing Active PFC (Power Factor Correction), the Passive PFC (about 75%) has been enhanced up to 99% while harmful harmonic frequencies are reduced to meet the Line Harmonic Distortion Requirement of IEC61000-3-2 Class D Specifications. Supports ATX20+4 Pin Main Connector ATX20+4 Pin Main Connector broadens the range of motherboard compatibility. Supports ATX12V CPU 4-Pin & EPS12V CPU 8-Pin Two ATX12V CPU 2 2 (4-Pin) power cables can be combined to form an EPS12V CPU 8-Pin power cable. Sleeved Cables All power cables are sleeved for easy cable management & enhanced air circulation inside the computer case. Multiple Safety Features Safety features including Over-Voltage Protection, Over-Current Protection, Short-Circuit Protection, Under-Voltage Protection, & Over Power Protection safeguard the system. Meets WEEE & Ro HS Standards This product complies with the WEEE & Ro HS environmental directives of the European Union. International Safety & EMC Certifications High Reliability The MTBF exceeds 100, 000 hours of continuous operation at 25&8451;, full load. ...

Key

Features: Automatic Heat Ventilation Aluminium Style Foreside Upper Dust Blocking Filter installed Anti-vibration

...

With the K1 Rev. A, Zalman is supplying a stylish midi tower with a tempered glass side panel, two pre-installed fans, power supply unit slot, clever cable management & stylish RGB lighting.

Features: Stylish mid-tower by Zalman in black Solid Front Panel with RGB Lighting Tempered Glass Side Panel PSU Shroud Removable dust filters in the Top, Bottom & Front Space for 2x 3.5" / 2.5" & 2x 2.5 inch drives Up to three radiators (1x 120mm, 1x 360/280mm & 1x 240mm) Two pre-installed 120mm fans (1x RGB, 1x Non-RGB) Supports Graphics cards up to 380mm in length Zalman has given the K1 Rev. A a Tempered Glass Side Panel & PSU Shroud. The interior of the chassis is completely black to match the rest of the case. In the bottom of the case there is a PSU Shroud for power supplies up to 190mm in length & a modular drive cage for two 3.5" or 2.5" HDD/SSDs. Two additional 2.5" drives can be mounted on the back of the motherboard tray. The minimalist front offers subtle RGB lighting. While Two pre-installed 120mm fans, an RGB fan in the rear of the chassis & a Non-RGB fan in the front ensure good ventilation. The front of the Zalman K1 Rev. A can accommodate a total of up to three 120mm fans, while there is space for up to two 120mm fans in the bottom & in the Top. Processor coolers must not exceed a height of 178mm, while graphics cards can be up to 380mm in length. As a special feature, the Zalman K1 Rev. A also offers options for installing water cooling. The case can accommodate up to three radiators: a 120mm radiator in the rear of the chassis, a 360/280mm radiator in the front & a 240mm radiator in the top. Removable dust filters in the top, bottom & front keep the case dust-free. Inside, stowed spaces along the edges of the housing ensure tidy cable management. SPECIFICATIONS:

Dimensions (W x H x D)
- 212 x 465 x 398mm Material
- Steel, Tempered Glass, Plastic Weight
- 5.8kg Colour
- Black Form Factor
- ATX, Micro-ATX, Mini-ITX Fan Support
- 3x 120/2x 140mm (front) 1x 120/140mm (rear) 2x 120/140mm (cover) 2x 120mm (bottom) 2x 120mm (vertical bracket) Fans pre-installed
- 1x 120mm (front) 1x 120mm (RGB, rear) Radiator Support
- 1x 240mm (Top) 1x 360/280mm (front) 1x 120mm (rear wall) Drive Support
- 2x 3.5" / 2.5" (internal) 2x 2.5" (internal) Power Supply Form Factor
- Standard ATX Dust Filters
- Bottom, Front, Top Expansion slots
- 7 I/O panel
- 2x USB (Universal Serial Bus) 3.0 2x USB (Universal Serial Bus) 2.0 1x per audio in/out 1x LED control button 1x power button 1x reset button Maximum GPU Length
- 380mm Maximum PSU Length
- 190mm Maximum CPU Cooler Height
- 178mm



















...

Sleek & Artistic Design. There are 18 high powered glossy LEDs & in a perfect ring configuration. The housing designs minimizes vibrations the dampener technology in the ring design. This maximizes LED diffusion to provide a premium lighting effect. ZALMAN’s original LED design provides wider & brighter LED effect in all direction ...

The Zalman LF120A3 120mm RGB Ring LED Case Fan Triple Pack + Hub features a sleek & artistic design. Vibrations are minimises thanks to the dampening structures in the ring design. Enjoy a premium lighting effect thanks to the ring LED fan on both sides which provides a wider & brighter LED effect in all directions! The RGB LED is addressable via the motherboard & can be synced with programmes such as Razer Chroma RGB to create your own epic visual lighting effects. The hub features 8 addressable RGB connectors so you can make your own unique style. Technical Specifications Bearing Type EBR Bearing

Dimensions 120*120*26 (H)mm Weight 110g Rating Voltage Fan: 12V DC LED: 5V DC Rating Current Fan: 0.12A LED: 0.65A Fan Speed 800~1, 300 RPM ± 10% Max Airflow 43 CFM Max Noise Level 25.0 d B (A) ± 10% Life Span 50, 000hrs Connector 4-Pin (PWM) 3-Pin (Addressable) Max Air pressure 1mm H&8322;O Cable Length Fan: 730 mm LED: 450mm Components Gigabyte M/B Convertor *1, Screw Bolts *4

...

Introducing Zalmans latest addition to their water cooling range, the LQ310 & LQ315. These water coolers are ideal if you want high performance while keeping things reasonably quiet. 1. Built-in pump with slim water block 2. Copper base & micro fins to maximise cooling 3. Quiet 120mm PWM fan supplied 4. Additional 120mm fan support 5. Durable & long-lasting tubing 6. Environmentally friendly 7. Easy installation & maintenance 8. Compatible with Intel LGA2011/1155/1366 & AMD FM1/FM2/AM3+/AM3/AM2+/AM2 Features
- Built-in water pump within the water block Low profile water block Micro fins & copper base High compatibility High durability tubing applied to ensure safety Minimised noise, maximised performance, up to Qmax 330W! Supports two 120mm cooling fans Eco friendly corrosion prevention coolant Blue LED water block High quality aluminium design

Specification
- Water Block & Pump
-
-

Dimensions, mm
- 65 dia x 32 (H)
- Materials
- Base = pure copper, fins = aluminium
- Water pump type
- Enclosed
- LED colour
- Blue
- Weight (water block)
- 195g
- Connector
- 4-pin Radiator details
-
- Rad

Dimensions, mm
- 153 (L) x 120 (W) x 38 (H)mm
- Rad materials
- Aluminium
- Tube length
- 300mm Fan details
-
- Fan

Dimensions, mm
- 120 (L) x 120 (W) x 25 (H)mm
- RPM
- 900
- 2000 ±10%
- Bearing type
- Long life
- Control method
- PWM control with auto restart
- PWM Duty Cycle
- 30
- 100 ±5%
- Qmax
- 330w Compatibility
- AMD FM2/FM1/AM2+/AM2/AM3+/AM3 & Intel LGA1156/1366/1155/2011 Rated Voltage
- DC12V Weight
- 575g















































...

Blue LED Water Block Built -in Pump Within water block Slim Water Block Design Micro Fins & Copper Base High Compatibility Zalman High Quality Design High Durability tube applied to ensure safety Minimized noise, Maximized performance, Qmax 340. Dual Cooling Fan Can be installed Specifications Water Block & Pump
-

Dimensions- ˜65 x 32T
- Materials-Base: Pure Copper
- Water Pump-Enclosed Type
- LED Color-Blue
- Weight (Water Block)-195g
- Connector-3 Pin Radiator
-

Dimensions-153 (L) x 124 (W) x 52 (H)mm
- Materials-Aluminum
- Tube Length-300mm Fan
-

Dimensions-120 (L) x 120 (W) x 25 (H)mm
- Speed-900
- 2, 000rpm ± 10%
- Bearing-Long life bearing
- Control Method-PWM Control, Auto Restart
- Connector-4 Pin
- PWM Duty Cycle-30
- 100 ± 5% Qmax
- 340w Rated Voltage
- DC12V Weight
- 810g

























...

Package

Width: 46cm Package Length: 33cm Package

Height: 50cm Gross Weight: 7.80kg Key



...

Special coated surface for fast & fine sliding Smooth & slick finish with high density Poly Jersey prevents static Tough against abrasion for long-lasting use Large anti-slip rubber base Environmentally friendly materials (Ro HS compliant) Specifications

Dimensions 400 (W) x 300 (H) x 3 (D)mm Weight 215g Materials Rubber, Poly Jersey Supported Mouse Ball Mouse, Optical Mouse, Laser Mouse

...

4/3-FAN structured to cool down the system efficiently (2 additional fans can be installed) Maximizes the air flow keeping the HDD & the system cool. According to the user needs control fan speed up to 6 fans. Supports bottom PSU installation for effective cooling of PSU & inner space of case. Dash board style user-centered design provides style convenience. Dust filters on the bottom & front prevent dust from entering. 2 USB (Universal Serial Bus) 3.0 port that speed up to 5 Gbps. One touch tool-free ODD bay for easy & quick installation. USB (Universal Serial Bus) ports, audio socket, power & reset buttons set on the front for user convenience. Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. luxurious interior with black coating finishing touch. 3in 1 Adapter Tray is provided for installing FDD / 3.5" HDD / 2.5" HDD/SSD. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Multi guide provided to prevent VGA card from bending & for installation for additional fans. Without the side guide 300mm high performance VGA card can be installed. Module design for convenient installation of SSD & HDD. Front detachable Tool Free ODD bay for convenient installation. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case. Cable hole provided for efficient use of the space. Up to 7 PCI slots scalability secured Specifications Enclosure Type
- ATX Mid Tower Dimensions
- 207 (W) x 533 (H) x 541 (D)mm Weight
- 9kg (19.84lb) Materials
- Plastic, Steel Motherboard Compatibility
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V VGA Card
- Full Size (300mm/11.8inch) Drive Bays
- 5.25" External Bay x 6 - 3.5" Internal Bay x 3
- Common (3in-1) Internal Bay 5.25"/3.5"/2.5" x 1 Cooling Components (Fans) - - Rear 120mm Fan Vent x 1 (1 Fan Included) - Top 120mm Fan Vent x 2 (1 Fan Included, 1 Fan Optional) - Cooling Kit (internal) 92mm Additional Fan Provided x 1 (1 Fan Included) - Bottom 120mm Fan Vent x 1 (1 Fan Optional) Fan Controller
- Simultaneously Control 6 Expansion Card Slots
- 7 I/O Ports
- Headphones x 1, Mic x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 x 2 Color
- Black












...