Tripp Lite’s APSX3024SW DC-to-AC inverter with automatic line-to-battery transfer & integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 3000 watts of continuous 230V sine wave AC power from any 24V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment & the battery set is recharged via 3 stage, 23/90 amp charging system. In UPS mode, the APS system responds to blackouts & severe voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output.

Includes:: a set of high current DC input terminals for simple installation (user supplies batteries & cabling
- see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging & UPS line power operation, & sine wave AC output in inverter & UPS backup modes. Built-in Automatic Voltage Regulation (AVR) corrects line power AC brownouts & overvoltages without using battery power during battery charging & UPS standby modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors & other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching & continuous status information (part APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications & site conditions with adjustable charger settings for wet/gel battery types & selectable line to battery power transfer voltages. 24V DC or 230V (selectable) AC input & output; 230V, 50/60 Hz, pure sine wave output (hardwired) 3000 watts continuous, 4500 watts Over Power & 6000 watts Double Boost inverter output 3-stage, 23/90 amp selectable wet/dry cell battery charger; Auto Transfer Switching Automatic Voltage Regulation corrects brownouts & overvoltages without using battery power


...

Tripp Lite Switched PDU / Power Distribution Unit offers advanced network control & monitoring with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions & remotely monitor output power consumption. Power Alert interface supports remote control & custom notification of user-specified conditions via email, secure web, SNMP, Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or be custom programmed for user-defined power-up & power-down sequences to ensure proper startup of interdependent IT systems & prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU output current consumption in amps can be displayed locally via visual meter or remotely via web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. Switched 32A 7.4k W 230V PDU; 2U horizontal rackmount Reports voltage, frequency & loading information via ethernet interface Visual current meter; Reversible housing Blue 230V IEC-309 32A (2P+E) input cable 16 C13 switched outlets with cord retention brackets Temperature, humidity & contact closure options ...

Tripp Lite Switched PDU / Power Distribution Unit offers advanced network control & monitoring with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions & remotely monitor output power consumption. Power Alert interface supports remote control & custom notification of user-specified conditions via email, secure web, SNMP, Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or be custom programmed for user-defined power-up & power-down sequences to ensure proper startup of interdependent IT systems & prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU output current consumption in amps is displayed locally via visual meter & remotely via web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. Switched 32A 230V PDU; 0U Vertical Rackmount Reports voltage, frequency & loading information via ethernet interface Visual current meter; Toolless button mount installation Attached 10ft / 3m input cord with IEC309 32A (2P+E) input 24 switched outlets (20 C13; 4 C19); cord retention brackets Temperature, humidity & contact-closure monitoring options Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Tripp Lite's APSINT3636VR 3-function DC to AC inverter with auto line-to-battery transfer & integrated charging system serves as an extended run, line interactive UPS or a standalone power source. Supplies up to 3600 watts of continuous 230V AC power from a 36 volt DC source. When hardwire input AC cable is energized, regulated commercial power passes through to connected equipment & the battery set is recharged via 3 stage, 30 amp charging system. Built-in voltage regulation adjusts brownouts & overvoltages back to usable levels without using battery power. In UPS mode, the APS system responds to blackouts & brownouts with an uninterrupted transfer to battery-derived AC output.

Includes:: a set of high current DC input terminals for simple installation (user supplies batteries & cabling). Reliable large transformer design with efficient PWM sine wave output & frequency control powers resistive electronic loads or large inductive motors, compressors & other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications & site conditions with adjustable charger settings for wet / gel battery types & selectable line to battery power transfer voltages. Key Features Supports 230V AC output from a 230V AC line power source or 12V DC battery source 20 millisecond automatic transfer between line & battery power supports UPS protection during blackouts & voltage fluctuations for equipment compatible with a one cycle transfer time Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see

Specification chart) Over Power inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery & temperature conditions. 3 stage, 30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging 3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC & AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer & SYSTEM OFF settings Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status & system fault status Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 259/264V high voltage auto transfer during overvoltages & selectable 144/163/182/201V AC low voltage auto transfer during brownouts Set of 4 additional configuration dip switches support 4 levels of charger limiting relative to output load size Resettable 10A charger AC input breaker & resettable 15A AC output breaker & automatic 2 speed cooling fan protect the inverter from load & temperature related failures Automatic overload & thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory) Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

You can power electrical appliances in your car with Tripp Lite's PVINT375 DC-to-AC power inverter. Convert 12 volt DC power from your automotive cigarette lighter jack to modified sine wave AC power compatible with 220-240 volt/50 Hz equipment. 375 watt continuous/600 watt instantaneous peak surge power handling capability powers laptop computers, battery chargers, TV/VCRs, gaming systems & small power tools. Universal outlet accepts French, German & UK style connectors, plus a variety of international plug sets. Rugged, all-metal case design withstands abuse in a compact format weighing Approx. 1 kg. Built-in low-battery alarm & auto-shutoff prevents deep battery discharge. ...

Tripp Lite's SMART500RT1U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime & equipment damage due to power outages, voltage fluctuations & transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 17 minutes half load runtime & 5 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA / 300 watt power handling capability is compatible with networking, telecom & other sensitive electronic applications.

Includes:: a total of 6 outputs with a single pair of outlets that can be individually controlled via software interface to reboot select equipment on demand or automatically shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS & site power conditions via built-in USB (Universal Serial Bus) & DB9 monitoring ports.

Includes:: Power Alert UPS monitoring & unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS & connected equipment in the case of fire or emergency situation. Multi-function audible alarms & set of 5 front panel LEDs offer at-a-glance notification of UPS & line power status. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges & line noise. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's SMX700HG offers medical-grade UPS protection with built-in line interactive voltage regulation, intelligent monitoring & unattended shutdown capability. Tested to CE/IEC 60601-1 as medical electrical equipment. Built-in isolation transformer with Faraday shield removes common mode noise while maintaining full AC surge suppression in all modes. Resistant to electrostatic discharge.

Includes:: high quality hospital-grade plug & outlets. 700VA power handling capacity supports computers, inter-networking equipment & other critical loads during commercial power failures. Line interactive voltage regulation corrects brownouts as low as 155V & overvoltages as high as 274 back to normal 230V levels, saving battery reserves for use only during complete power failures.

Includes:: 6 outlets, diagnostic LEDs & built-in USB (Universal Serial Bus) & RS-232 communications ports that work with downloadable Power Alert Software & cabling to provide automatic unattended shutdown of connected network & PC applications. 700VA line interactive tower UPS Maintains 230V nominal output over an input range of 155 to 274V Professional features include serial port, USB (Universal Serial Bus) port, IEC320 plug & outlets, built-in isolation transformer Input: IEC320 C14 (230V 3.6A) / Output: 6 IEC320 C13 (230V) 2 year product warranty Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's APSX750 3-function DC-to-AC inverter with auto line-to-battery transfer & integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 230V AC power to 2 AC outlets from any 12V battery or automotive DC source. When AC cable is connected to a live wall socket, utility power passes through to connected equipment & the battery set is recharged via 3 stage, 20 amp charging system. In UPS mode, the APS system responds to blackouts & brownouts with an uninterrupted transfer to battery-derived AC output.

Includes:: a set of high current DC input terminals for simple installation (user supplies batteries & cabling). Reliable large transformer design with efficient PWM sine wave output & frequency control powers resistive electronic loads or large inductive motors, compressors & other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications & site conditions with adjustable charger settings, settings for wet / gel battery types & selectable line to battery power transfer voltages.

...

Tripp Lite's AVRX550U Ultra-Compact Line Interactive UPS offers complete power protection for desktop PCs, network workstations & a wide variety of professional & consumer electronic devices. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected equipment running without interruption or data loss during power failures. Automatic Voltage Regulation / AVR power conditioning maintains smooth, continuous operation of connected equipment during brownouts & overvoltages. Surge-only outlets offer convenient protection for printers & other desktop accessories not requiring battery support. AC & dataline surge suppression prevents connected equipment damage. USB (Universal Serial Bus) communications port supports built-in power management & auto-shutdown features of Windows & Mac OS X or full featured monitoring & data-saving auto-shutdown options using Tripp Lite's free Power Alert monitoring software. AVRX550U ultra-compact 230V line interactive UPS offers complete AC power protection from blackouts, brownouts & transient surges 550VA / 300 watt UPS output capacity Uninterruptible Power Supply / UPS operation maintains battery-derived AC output during blackouts to prevent data loss & system downtime for connected equipment Built-in USB (Universal Serial Bus) port enables data-saving unattended shutdown when used with Tripp Lite's Power Alert software, available via FREE download from www.tripplite.com HID-compliant USB (Universal Serial Bus) port also enables integration with built-in power management & auto shutdown features of Windows & Mac OS X Automatic Voltage Regulation / AVR corrects extended brownouts & overvoltages from 159 to 282V, without using battery power 3.3 minutes runtime at 100% load (300 watts), 8 minutes runtime at 50% load (150 watts) 20 minutes runtime for a desktop computer system consuming 80 watts continuous 6 total C13 outlets;

Includes:: two 2m C13 to C14 power cables 3 UPS battery backup outlets, plus 3 additional surge-only outlets C14 inlet supports a variety of site specific input cordsets Network grade AC surge & lightning protection is available from all outlets; Built-in data line surge suppression protects a single dialup or DSL line Supports Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipment, ideal for unattended kiosk applications Built-in grounding lug Hot swappable user battery replacement supported via easy access battery access door Space saving, ultra-compact housing with support for wall-mount, desktop or floor placement Package

Includes:: AVRX550U UPS System USB (Universal Serial Bus) cable Two C13 to C14 power cables Instruction manual



...

Tripp Lite's AVRX750U Ultra-Compact Line Interactive UPS offers complete power protection for desktop PCs, network workstations & a wide variety of professional & consumer electronic devices. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected equipment running without interruption or data loss during power failures. Automatic Voltage Regulation / AVR power conditioning maintains smooth, continuous operation of connected equipment during brownouts & overvoltages. Surge-only outlets offer convenient protection for printers & other desktop accessories not requiring battery support. AC & dataline surge suppression prevents connected equipment damage. USB (Universal Serial Bus) communications port supports built-in power management & auto-shutdown features of Windows & Mac OS X or full featured monitoring & data-saving auto-shutdown options using Tripp Lite's free Power Alert monitoring software. AVRX750U ultra-compact 230V line interactive UPS offers complete AC power protection from blackouts, brownouts & transient surges 750VA / 450 watt UPS output capacity Uninterruptible Power Supply / UPS operation maintains battery-derived AC output during blackouts to prevent data loss & system downtime for connected equipment Built-in USB (Universal Serial Bus) port enables data-saving unattended shutdown when used with Tripp Lite's Power Alert software, available via FREE download from www.tripplite.com HID-compliant USB (Universal Serial Bus) port also enables integration with built-in power management & auto shutdown features of Windows & Mac OS X Automatic Voltage Regulation / AVR corrects extended brownouts & overvoltages from 159 to 282V, without using battery power 3 minutes runtime at 100% load (450 watts), 10 minutes runtime at 50% load (225 watts) 44 minutes runtime for a desktop computer system consuming 80 watts continuous 6 total C13 outlets;

Includes:: two 2m C13 to C14 power cables 3 UPS battery backup outlets, plus 3 additional surge-only outlets C14 inlet supports a variety of site specific input cordsets Network grade AC surge & lightning protection is available from all outlets; Built-in data line surge suppression protects a single dialup or DSL line Supports Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipment, ideal for unattended kiosk applications Built-in grounding lug Hot swappable user battery replacement Space saving, ultra-compact housing with support for wall-mount, desktop or floor placement

...