Tripp Lite's SMX1500SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Large internal batteries offer 20 min. half load runtime & 8 min. full load runtime. 1500VA/900W power handling capability & full-time sine wave output offer guaranteed compatibility with networking, telecom & other sensitive electronic applications.

Includes:: 8 UPS-protected C13 output receptacles. Supports simultaneous remote monitoring of UPS & site power conditions via built-in network accessory card slot, USB (Universal Serial Bus) & DB9 serial monitoring ports. HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications interfaces support messaging of UPS & line power status, plus output power control for delayed or immediate reboot of all connected devices at once.

Includes:: Power Alert UPS monitoring & unattended shutdown software with management support for an unlimited number of network UPS systems. Single-line tel/DSL & network Ethernet line surge suppression. Built-in audible alarm & 9 LEDs provide status notification for line power, battery power, battery charge level, load level, plus AVR boost & trim operational status information. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges. Attractive, all-black tower housing. Features 1500VA/900W power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom & other sensitive electronic devices Large internal batteries offer runtimes of 20 minutes at half load (750VA/450W) & 8 minutes at full load (1500VA/900W) Automatic voltage regulation (AVR) circuits maintain user-selectable 220V, 230V or 240V nominal output over an input voltage range of 174-266V (220V), 182-278V (230V) or 190-290V (240V) 8 C13 output receptacles IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles Power Alert UPS monitoring & unattended shutdown software included Offers simultaneous monitoring by up to 3 directly connected devices through included USB (Universal Serial Bus), DB9 & SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included Power Alert monitoring software Communications ports support messaging of UPS & line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage & remaining battery capacity HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X Supports Tripp Lite's Watch Dog software (requires optional WATCHDOGSW) 9 LEDs provide continuous status information of UPS operating parameters & site power quality Hot-swappable batteries allow on-site battery replacement without powering off connected equipment Optional PDUBHV10 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment Single-line tel/DSL & network Ethernet line surge suppression CE/IEC 62040, GOST, SASO, Ro HS-compliant, Class A Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's PDUMV20HVNET Switched, Metered Rack Power Distribution Unit provides a variety of advanced network control & monitoring functions. It gives IT managers the ability to remotely monitor PDU power consumption & in-rack environmental conditions, & to turn on, turn off, recycle or lock out power to each individual receptacle. Switched PDU systems can be accessed, configured & controlled through secure Web, SNMP or Telnet interfaces. Individually switched outlets can be controlled via a built-in Web/network interface, enabling remote reboots of unresponsive network hardware. User-defined power-up & power-down outlet sequences ensure proper operation of interdependent IT systems & prevent inrush-related overloads as devices are powered on. Programmable load shedding of less critical devices at user-defined intervals extends UPS uptime in response to power failures. Unused PDU outlets can be electronically locked off to prevent powering of unauthorized hardware. PDU power consumption is displayed locally & can be monitored via the Web/network interface, with user-defined alarms to warn of potential overloads before critical IT mains or branch breakers trip. An optional ENVIROSENSE temperature/humidity probe enables remote monitoring of in-rack environmental conditions & alarms for up to three user-supplied contact-closure sensors. It supports real-time monitoring, notification & logging of all on-board reporting functions with user-specified alarm thresholds & actions for each reported condition. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Tripp Lite's Smart Online SUINT2000XL on-line, double-conversion UPS protects critical server, networking & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Space-saving upright tower format. Large capacity 2000VA/1400W UPS continuously converts incoming AC to DC, then back to perfect sine wave AC output at selectable 220/230/240V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency fluctuations & other hard-to-solve power problems not addressed by other UPS types. True sine wave output & zero transfer time offer guaranteed compatibility with all equipment types.

Includes:: 8 C13 outlets. Battery support can be extended with external battery packs (part BP72V18).

Includes:: slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port for unattended shutdown, remote control & monitoring of UPS system & power data.



...

Tripp Lite's APSINT2012 DC-to-AC inverter with automatic line-to-battery transfer & integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 230V AC power from any 12V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment & the battery set is recharged via 3 stage, selectable 15/60 amp charging system. In UPS mode, the APS system responds to blackouts & voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output.

Includes:: a set of high current DC input terminals for simple installation (user supplies batteries & cabling
- see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging & UPS line power operation, plus efficient PWM sine wave AC output in inverter & UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors & other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching & continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications & site conditions with adjustable charger settings for wet/gel battery types & selectable line to battery power transfer voltages. 12V DC or 230V AC input; 230V, 50 Hz output (hardwired) 2000 watts continuous, 3000 watts Over Power & 4000 watts Double Boost inverter output (see specifications) 3 stage, selectable 15/60 amp wet/dry cell battery charger Auto Transfer Switching option for battery backup / UPS operation Reliability enhanced large-transformer design with protected DC & AC wiring terminals Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

This product is a 2200VA on-line, double-conversion UPS system for critical server, network & telecommunications equipment. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 130V & overvoltages to 275V. Network management interfaces support simultaneous communications via USB (Universal Serial Bus) port, DB9 serial port & SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data & utility power conditions via all 3 network interfaces. Integrated 2-bank PDU switching supports load shedding & remote-reboot of connected equipment. LED display panel easily rotates for better viewing in rackmount or tower configurations. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Tripp Lite's SUINT3000RTXL3U UPS System offers complete power conditioning & battery support for critical fileservers & internetworking equipment in a versatile 3U rack/tower configuration. Offers compatibility with 200/208/220/230/240V applications at 50/60 Hz. Double conversion power conditioning process removes line noise, voltage fluctuations & frequency variations by converting incoming AC to DC, then back to universally compatible pure sine wave AC output. Standard internal batteries offer seamless support of connected equipment during power failures with zero transfer time. Support through extended power failures is available with the addition of 2U rack/tower compatible battery packs BP72V15-2U (limit 1), BP72V28RT-3U (multi-pack compatible) & BP72V18-2US (multi-pack compatible). Maintains continuous output over an input range of 160 to 275V without depleting battery reserves. True online, double-conversion power conditioning offers enhanced, network-grade pure sine wave AC power for critical fileservers, internetworking equipment & sensitive electronics Maintains output within 2% of selectable 200/208/220/230/240V at 50/60 Hz (+/-0.05 Hz) Neutralizes frequency variations, fast electrical impulses, harmonics & other hard-to-solve power problems not addressed by other UPS types Versatile rack/tower format requires only 3 rack spaces (3U) in rackmount applications; included tower stand set supports upright configuration ...

Tripp Lite's SMX3000XLRT2U is an intelligent, line interactive rack/tower uninterruptible power supply that prevents data loss, downtime & equipment damage due to power outages, voltage fluctuations & transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 13 minutes half load runtime & 4 minutes at full load. Runtime is expandable with optional BP48V24-2U or BP48V60RT-3U external battery packs. Maintains regulated 230V nominal output without using battery power during brownouts & overvoltages from 151 to 282V. 3000VA / 2250 watt power handling capability & full time sine wave output offers guaranteed compatibility with networking, telecom & other sensitive electronic applications.

Includes:: a total of 9 outlets arranged in 3 load banks that are individually switchable via software interface to reboot select equipment on demand or automatically shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS & site power conditions via built-in USB (Universal Serial Bus) & DB9 monitoring ports.

Includes:: Power Alert UPS monitoring & unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS & connected equipment in the case of fire or emergency. Multi-function audible alarms & set of 5 front panel LEDs offer at-a-glance notification of UPS & line power status. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges & line noise. Attractive all-black color scheme. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite’s APSX3024SW DC-to-AC inverter with automatic line-to-battery transfer & integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 3000 watts of continuous 230V sine wave AC power from any 24V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment & the battery set is recharged via 3 stage, 23/90 amp charging system. In UPS mode, the APS system responds to blackouts & severe voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output.

Includes:: a set of high current DC input terminals for simple installation (user supplies batteries & cabling
- see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging & UPS line power operation, & sine wave AC output in inverter & UPS backup modes. Built-in Automatic Voltage Regulation (AVR) corrects line power AC brownouts & overvoltages without using battery power during battery charging & UPS standby modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors & other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching & continuous status information (part APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications & site conditions with adjustable charger settings for wet/gel battery types & selectable line to battery power transfer voltages. 24V DC or 230V (selectable) AC input & output; 230V, 50/60 Hz, pure sine wave output (hardwired) 3000 watts continuous, 4500 watts Over Power & 6000 watts Double Boost inverter output 3-stage, 23/90 amp selectable wet/dry cell battery charger; Auto Transfer Switching Automatic Voltage Regulation corrects brownouts & overvoltages without using battery power


...

Tripp Lite Switched PDU / Power Distribution Unit offers advanced network control & monitoring with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions & remotely monitor output power consumption. Power Alert interface supports remote control & custom notification of user-specified conditions via email, secure web, SNMP, Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or be custom programmed for user-defined power-up & power-down sequences to ensure proper startup of interdependent IT systems & prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU output current consumption in amps can be displayed locally via visual meter or remotely via web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. Switched 32A 7.4k W 230V PDU; 2U horizontal rackmount Reports voltage, frequency & loading information via ethernet interface Visual current meter; Reversible housing Blue 230V IEC-309 32A (2P+E) input cable 16 C13 switched outlets with cord retention brackets Temperature, humidity & contact closure options ...

Tripp Lite Switched PDU / Power Distribution Unit offers advanced network control & monitoring with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions & remotely monitor output power consumption. Power Alert interface supports remote control & custom notification of user-specified conditions via email, secure web, SNMP, Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or be custom programmed for user-defined power-up & power-down sequences to ensure proper startup of interdependent IT systems & prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU output current consumption in amps is displayed locally via visual meter & remotely via web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. Switched 32A 230V PDU; 0U Vertical Rackmount Reports voltage, frequency & loading information via ethernet interface Visual current meter; Toolless button mount installation Attached 10ft / 3m input cord with IEC309 32A (2P+E) input 24 switched outlets (20 C13; 4 C19); cord retention brackets Temperature, humidity & contact-closure monitoring options Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...