Network security The Cisco Catalyst 2960-X series switch provides a range of security features to limit access to the network & mitigate threats. Redundancy & resiliency Cisco Catalyst 2960-X series switch offers a number of redundancy & resiliency features to prevent outages & help ensure that the network remains available. Application visibility Catalyst 2960-X series switch supports Net Flow Lite, which enables IT teams to understand the mix of traffic on their network & identify anomalies by capturing & recording specific packet flows. Power management The 2960-X switch offers a range industry leading features for effective energy efficiency & energy management. Network management The Cisco Catalyst 2960-X series switch offers a superior CLI for detailed configuration & administration. 2960-X series switch is also supported in the full range of Cisco network management solutions. Main Specifications
- Product Description: Cisco Catalyst 2960XR-48FPD-I
- switch
- 48 ports
- Managed
- desktop, rack-mountable
- Device Type: Switch
- 48 ports
- L3
- Managed
- stackable
- Enclosure Type: Desktop, rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 (Po E+) + 2 x SFP+
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 740 W
- Performance: Switching capacity:216 Gbps Forwarding performance:130.9 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9216 bytes
- Routing Protocol: OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng
- Remote Management Protocol: SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
-

Features: Layer 2 switching, power over Ethernet (Po E), auto-negotiation, ARP support, Cisco Fast Ether Channel, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Intrusion Detection System (IDS), Broadcast Storm Control, IPv 6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (Qo S), RADIUS support, SSH support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Po E+, Cisco Energy Wise technology, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv 4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), Net Flow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (Co S), Cisco Flex Stack Plus
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
- Power: AC 120/ 230 V (50/ 60 Hz )
- Power Redundancy: Optional
- Dimensions: (Wx Dx H) 44.5 cm x 40.8 cm x 4.45 cm
- Weight: 6.6kg
- Manufacturer Warranty: Limited lifetime warranty




























...

- Product Description: Cisco Catalyst 2960XR-48FPS-I
- switch
- 48 ports
- Managed
- desktop, rack-mountable
- Device




...

- Product Description: Cisco Catalyst 2960XR-48LPD-I
- switch
- 48 ports
- Managed
- desktop, rack-mountable
- Device




...

- Product Description: Cisco Catalyst 2960XR-48LPS-I
- switch
- 48 ports
- Managed
- desktop, rack-mountable
- Device




...

Network security The Cisco Catalyst 2960-X series switches provide a range of security features to limit access to the network & mitigate threats. Redundancy & resiliency Cisco Catalyst 2960-X series switches offer a number of redundancy & resiliency features to prevent outages & help ensure that the network remains available. Application visibility Catalyst 2960-X series switches support Net Flow Lite, which enables IT teams to understand the mix of traffic on their network & identify anomalies by capturing & recording specific packet flows. Power management The 2960-X switches offer a range industry leading features for effective energy efficiency & energy management. Network management The Cisco Catalyst 2960-X series switches offer a superior CLI for detailed configuration & administration. 2960-X series switches are also supported in the full range of Cisco network management solutions. Intelligent Power over Ethernet Plus Cisco Catalyst 2960-X series switches support both IEEE 802.3af Power over Ethernet (Po E) & IEEE 802.3at Po E+ (up to 30W per port) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E/ Po E+ end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Main Specifications
- Product Description: Cisco Catalyst 2960XR-48TD-I
- switch
- 48 ports
- Managed
- desktop, rack-mountable
- Device Type: Switch
- 48 ports
- L3
- Managed
- stackable
- Enclosure Type: Desktop, rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 + 2 x SFP+
- Performance: Switching capacity:216 Gbps Forwarding performance:130.9 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9216 bytes
- Routing Protocol: OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng
- Remote Management Protocol: SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, CLI
-

Features: Layer 2 switching, auto-negotiation, ARP support, Cisco Fast Ether Channel, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Broadcast Storm Control, IPv 6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (Qo S), RADIUS support, MLD snooping, Dynamic ARP Inspection (DAI), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (Co S)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az Power AC 120/ 230 V (50/ 60 Hz )
- Power Redundancy: Yes
- Dimensions: (Wx Dx H) 44.5 cm x 40.8 cm x 4.45 cm
- Weight:6.1kg
- Manufacturer Warranty: Limited lifetime warranty

























...

Network security The Cisco Catalyst 2960-X series switches provide a range of security features to limit access to the network & mitigate threats. Redundancy & resiliency Cisco Catalyst 2960-X series switches offer a number of redundancy & resiliency features to prevent outages & help ensure that the network remains available. Application visibility Catalyst 2960-X series switches support Net Flow Lite, which enables IT teams to understand the mix of traffic on their network & identify anomalies by capturing & recording specific packet flows. Power management The 2960-X switches offer a range industry leading features for effective energy efficiency & energy management. Network management The Cisco Catalyst 2960-X series switches offer a superior CLI for detailed configuration & administration. 2960-X series switches are also supported in the full range of Cisco network management solutions. Main Specifications
- Product Description: Cisco Catalyst 2960XR-48TS-I
- switch
- 48 ports
- Managed
- desktop, rack-mountable
- Device Type: Switch
- 48 ports
- L3
- Managed
- stackable
- Enclosure Type: Desktop, rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 + 4 x SFP
- Performance: Switching capacity:216 Gbps Forwarding performance (64-byte packet size):107.1 Mpps
- Capacity: Active VLANs:1023
- Jumbo Frame Support: 9216 bytes
- Routing Protocol: OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, OSPFv 3, PIM-SSM, policy-based routing (PBR), RIPng
- Remote Management Protocol: SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
-

Features: Full duplex capability, Layer 2 switching, auto-negotiation, BOOTP support, ARP support, Cisco Fast Ether Channel, VLAN support, auto-uplink (auto MDI/ MDI-X), Cisco Gigabit Ether Channel, IGMP snooping, Syslog support, Diff Serv support, Broadcast Storm Control, IPv 6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (Qo S), RADIUS support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco Energy Wise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), Net Flow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (Co S), Cisco Flex Stack Plus, Diff Serv Code Point (DSCP) support, IGMP filtering
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1AX Power AC 120/ 230 V (50/ 60 Hz )
- Power: Redundancy Optional
-

Dimensions (Wx Dx H) 44.5 cm x 40.8 cm x 4.45 cm
- Weight: 6kg
- Manufacturer Warranty: Limited lifetime warranty



























...

The Cisco Catalyst 3560 series is a line of fixed-configuration, enterprise-class switches that include IEEE 802.3af & Cisco pre-standard Power over Ethernet (Po E) functionality in Fast Ethernet & Gigabit Ethernet configurations. The Cisco Catalyst 3560 is an ideal access layer switch for small enterprise LAN access or branch-office environments, combining both 10/100/1000 & Po E configurations for maximum productivity & investment protection while enabling the deployment of applications such as IP telephony, wireless access, video surveillance, building management systems, & remote video kiosks. Customers can deploy network-wide intelligent services
- such as advanced quality of service (Qo S), rate limiting, access control lists (ACLs), multicast management, & high-performance IP routing
- while maintaining the simplicity of traditional LAN switching. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

The Cisco Catalyst 3560 series is a line of fixed-configuration, enterprise-class switches that include IEEE 802.3af & Cisco pre-standard Power over Ethernet (Po E) functionality in Fast Ethernet & Gigabit Ethernet configurations. The Cisco Catalyst 3560 is an ideal access layer switch for small enterprise LAN access or branch-office environments, combining both 10/100/1000 & Po E configurations for maximum productivity & investment protection while enabling the deployment of applications such as IP telephony, wireless access, video surveillance, building management systems, & remote video kiosks. Customers can deploy network-wide intelligent services
- such as advanced quality of service (Qo S), rate limiting, access control lists (ACLs), multicast management, & high-performance IP routing
- while maintaining the simplicity of traditional LAN switching.

...

The Cisco Catalyst 3560 Series switches is a line of fixed configuration, enterprise-class switches that provide availability, security, & quality of service (Qo S) to enhance network operations. The Catalyst 3560 is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products & applications such as IP telephones, wireless access points, video surveillance, building management systems, & remote video kiosks. Customers can deploy network-wide intelligent services, such as advanced Qo S, rate limiting, access control lists (ACLs), multicast management, & high-performance IP routing
- while maintaining the simplicity of traditional LAN switching. Embedded in the Catalyst 3560 is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure & troubleshoot multiple Cisco Catalyst desktop switches using a standard Web browser. Cisco CMS Software provides configuration wizards that greatly simplify the implementation of converged networks & intelligent network services. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

The Cisco Catalyst 3560 is an ideal access layer switch for small enterprise LAN access or branch-office environments, enabling the deployment of new applications such as IP telephony, wireless access, video surveillance, building management systems, & remote video kiosks. Customers can deploy networkwide intelligent services-such as advanced quality of service (Qo S), rate limiting, access control lists (ACLs), multicast management, & high-performance IP routing-while maintaining the simplicity of traditional LAN switching. PRODUCT

Features: 24 Ethernet 10/100 ports & 2 SFP-based Gigabit Ethernet ports; 1RU fixed-configuration, multilayer switch; Enterprise-class intelligent services delivered to the network edge; Standard Multilayer Software Image (SMI) installed; Basic RIP & static routing, upgradeable to full dynamic IP routing.

...