The Cisco Catalyst 2960S-48LPS-L Ethernet Switch is the leading Layer 2 edge, providing enhanced ease of use, highly secure business operations, enhanced sustainability, & a borderless network experience. The Cisco Catalyst 2960-S Switch

Includes:: new Cisco Flex Stack switch stacking capability with 1 & 10 Gigabit connectivity, & Power over Ethernet Plus (Po E+) with the Cisco Catalyst 2960-S Switch offering fast Ethernet access connectivity & Po E capabilities. The Cisco Catalyst 2960-S is fixed-configuration access switches designed for enterprise, mid-market, & branch office networks to provide lower total cost of ownership.

...

The Cisco Catalyst 2960-C series compact switch is a small form-factor Fast Ethernet & Gigabit Ethernet switch designed for deployments outside the wiring closet. Enterprise & commercial customers can deliver advanced security services, unified communications, wireless, IP video cameras, & other applications for the office workspace, micro branch office, classroom, cruise ship, & other wiring-constrained environments. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Catalyst Compact Switches easily expand your Catalyst switching infrastructure outside the wiring closet to enable workspaces, extend wireless LANs, and connect Po E devices. These fan-less, small form-factor switches are ideal for space-constrained deployments where multiple cable runs would be challenging. The Cisco Catalyst 2960-CX compact switches help optimize network deployments. These Gigabit Ethernet (Gb E) managed switches are ideal for high-speed data connectivity, Wi-Fi backhaul, and Power over Ethernet (Po E) connectivity in places where space is at a premium. With a single copper or fiber cable from the wiring closet, Catalyst compact switches enable IP connectivity for devices such as IP phones, wireless access points, surveillance cameras, PCs, and video endpoints. With their quiet, fanless design & compact footprint, these switches offer flexible mounting options & open up a variety of network design & connectivity options. Use them in offices, classrooms, hotels, retail stores, and other enterprise & branch locations. The setup allows for shorter cable runs from the compact switches, allowing for flexibility in space redesign & growth as the devices join the network
- this eliminating the need for expensive & inflexible cabling infrastructure. Main Specifications
- Product Description: Cisco Catalyst 2960CX-8PC-L
- switch
- 8 ports
- Managed
- desktop, rack-mountable, DIN rail mountable, wall-mountable
- Device Type: Switch
- 8 ports
- Managed
- Enclosure Type: Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 8 x 10/ 100/ 1000 (Po E+) + 2 x SFP + 2 x 10/ 100/ 1000
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 124W
- Performance: Forwarding performance:12 Gbps Forwarding performance (64-byte packet size):17.9 Mpps
- Capacity: Virtual interfaces (VLANs):255
- Jumbo Frame Support: 9018 bytes
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
-

Features: BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Access Control List (ACL) support, Quality of Service (Qo S), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (Co S), Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az
- Power:AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 26.9 cm x 23.8 cm x 4.44 cm
- Weight: 2.27kg
- Manufacturer Warranty: Limited lifetime warranty


























...

Small form factor;fan-less design;silent operation The switch can be used in open workspaces & other areas that cant tolerate equipment noise & where multiple cable runs could be difficult, expensive, and intrusive. Flexible mounting options The switch can be mounted on the wall, under a desk, rack, DIN rail, or practically anywhere theyre needed. 10-Gigabit SFP+ uplinks Accommodates business growth & increased traffic, such as aggregate upstream gigabit traffic loads from 802.11ac Wi-Fi access points. Main Specifications
- Product Description: Cisco Catalyst 2960CX-8TC-L
- switch
- 8 ports
- Managed
- desktop, rack-mountable, DIN rail mountable, wall-mountable
- Device Type: Switch
- 8 ports
- Managed
- Enclosure Type: Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 8 x 10/ 100/ 1000 + 2 x SFP + 2 x 10/ 100/ 1000 (uplink)
- Performance: Forwarding performance:12 Gbps Forwarding performance (64-byte packet size):17.9 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9018 bytes
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
-

Features: BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Access Control List (ACL) support, Quality of Service (Qo S), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (Co S), Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az Power AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 26.9 cm x 21.3 cm x 4.44 cm
- Weight: 1.72kg
- Manufacturer Warranty: Limited lifetime warranty






















...

Cisco Catalyst 2960 Series Intelligent Ethernet Switches are a new family of fixed-configuration standalone devices that provide desktop Fast Ethernet & Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, mid-market, & branch office networks. The Catalyst 2960 Series offers integrated security, including network admission control (NAC), advanced quality of service (Qo S), & resiliency to deliver intelligent services for the network edge. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Cisco Catalyst 2960-L series switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, and out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure, and energy-efficient business operations. ...

Cisco Catalyst 2960-L Series Switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, and out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure, and energy-efficient business operations. ...

Simplify operations, get the reliability you need, and deliver better mobile experiences to your employees & customers. The Cisco Catalyst 2960-L supports Power over Ethernet (Po E). Make your network ready for the mobile devices & applications it needs to support with the 2960-L, all at a great value. ...

Cisco Catalyst 2960-L Series Switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, and out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure, and energy-efficient business operations. 2 or 4 Gigabit Small Form-Factor Pluggable (SFP) uplinks Fanless operation & operational temperature up to 55°C for deployment outside the wiring closet Higher mean time between failure, because they have no moving mechanical parts Less than 11.5-inch depth fit in use cases with space limitation Reduced power consumption & advanced energy management features RJ-45 & USB (Universal Serial Bus) console access for simplified operations Intuitive web UI for easy deployment & management ...

Cisco Catalyst 2960-L Series switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, and out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure & energy-efficient business operations with a range of Cisco IOS software features. ...