Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Technical Description: C2G SC-SC 9/125 OS1 Duplex Singlemode PVC Fiber Optic Cable (LSZH)
- Patch cable
- SC single mode (M)
-


...

C2G SC-ST 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH) Network cable ST multi-mode (M) to SC multi-mode (M) 1 m fibre optic 50 / 125 micron OM3 halogen-free aqua Connector 1: (1) SC Male Connector 2: (1) ST Male LSZH rated fibre optic cable designed for 10 G Base-SR & 10 G Base-LRM ports & equipment Low Smoke Zero Halogen (LSZH / LS0H) jacket Product Description This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10 G Base-SR, 10 G Base-LRM, SFP+ & QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic & corrosive gases in poorly ventilated spaces & other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment & the performance headroom required to support LED & VCSEL laser light sources, and 10 Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. Main Specifications Product Description C2G SC-ST 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH)
- network cable
- 1 m
- aqua Type Network cable
- OM3 Technology Fibre optic Type of Fibre Optics Multimode Features Halogen-free Length 1 m Core / Cladding Diameter 50 / 125 micron Connector 2 x ST multi-mode
- male Connector (Second End) 2 x SC multi-mode
- male Colour Aqua Manufacturer Warranty Limited lifetime warranty





...

Today's mission critical advanced Fast Ethernet & Gigabyte computer networks require the stability & reliability of Enhanced Category 5 high-speed cabling to distribute data, voice & video. To protect your high-speed network from noise & electromagnetic interference, use Shielded Enhanced Cat 5 Patch Cables from Cables To Go. The moulded boot provides extra strain-relief & durability. Cables To Go Shielded Enhanced Cat 5 Patch Cables are available in a variety of colors to easily color-code your network installation. Specifications Connector: Shielded 50-micron gold plated RJ45 Male to Male Conductor: 4-pair 24 AWG Stranded STP Jacket: PVC Moulded boot provides extra strain-relief & durability Foil shielding with drain wire Applications: 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM Voice Designed For: Network Adapters, Hubs, Switches, Routers, DSL/ Cable Modems, Patch Panels & other twisted-pair applications in high-noise environments Wired: TSB 568B (AT&T 258A) Meets or exceeds industry standards for NEXT & return loss ...

C2G Smart 2-Port USB (Universal Serial Bus) Car Charger, 2.4A Output Charge multiple mobile devices from one DC outlet Features Two USB (Universal Serial Bus)-A female ports 5V, 2.4A maximum total output Smart-IC technology auto detects output requirements Accurate limited current output & overload protection Connector 1: DC Power Plug Connector 2: USB (Universal Serial Bus)-A Female Blue LED indicator when powered Fireproof shell material The Smart 2-Port USB (Universal Serial Bus) Car Charger is an ideal solution for charging mobile devices while on long road trips or short commutes. This high-performance car charger features a compact design for easy portability & provides a power output of 5V & 2.4A for device charging. ...

This Snap-In HDMI Keystone Insert Module means that you can custom-configure your keystone wall plates & patch panels for greater control & more flexibility & provides a full range of solutions for voice, home networking, home office, audio/video & more. Use this coupler for HDMI applications; just snap it into patch panels, compatible wall plates & surface boxes for a straightforward installation. ...

Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

One component of a robust solution that, when paired with a remote unit (part 89010, sold separately), extends your VGA & 3.5mm audio signals up to 300 meters over a Cat 5E UTP cable, & distributes the signal to 1 monitor, projector, or display. Ideal for applications when your VGA monitor needs to be placed beyond the average 30 meter VGA cable limitation, and/or you want to split the signal to multiple displays. Driving a VGA signal over Cat 5E helps you take advantage of your UTP cable infrastructure already there for a cost-effective & reliable installation. The Tru Link VGA over Cat 5 solution is ideal for applications when you need to place your computer in remote location. This is common in digital signage applications for retail stores, houses of worship, classrooms, & boardrooms where you need video presentation in one room, but want the computer to be out of sight & in a safe & secure environment. With the Tru Link VGA + 3.5mm audio over Cat 5 extender, you can place your display across the room, on another floor, or in another building while your computer remains in a convenient location. ...

The Trulink 2-port monitor splitter is an excellent solution for distributing video across two displays. Create a simple digital signage application or use in a conference room or classroom to broadcast computer content to multiple displays. With integrated video signal enhancement, displays can be placed up to 64 meters from the source without sacrificing video quality. This provides complete flexibility while ensuring the highest quality resolution. Multiple splitters can be added to expand the number of displays & distance. This splitter's compact cable design makes it easy to use in tight spaces or when traveling. No drivers or additional software are required, making it quick to set up & easy to use. USB (Universal Serial Bus) power adapter is included to power the splitter from your PC, meaning no power outlets are needed! Specifications Device Type Video splitter
- 2 ports Enclosure Type Desktop Subtype VGA Ports 2 x VGA Features USB powered Weight 136 g Colour Black Manufacturer Warranty 1 year warranty
...