Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Technical Description: C2G SC-SC 9/125 OS1 Duplex Singlemode PVC Fiber Optic Cable (LSZH)
- Patch cable
- SC single mode (M)
-


...

C2G SC-ST 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH) Network cable ST multi-mode (M) to SC multi-mode (M) 1 m fibre optic 50 / 125 micron OM3 halogen-free aqua Connector 1: (1) SC Male Connector 2: (1) ST Male LSZH rated fibre optic cable designed for 10 G Base-SR & 10 G Base-LRM ports & equipment Low Smoke Zero Halogen (LSZH / LS0H) jacket Product Description This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10 G Base-SR, 10 G Base-LRM, SFP+ & QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic & corrosive gases in poorly ventilated spaces & other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment & the performance headroom required to support LED & VCSEL laser light sources, and 10 Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. Main Specifications Product Description C2G SC-ST 10 Gb 50/125 OM3 Duplex Multimode PVC Fiber Optic Cable (LSZH)
- network cable
- 1 m
- aqua Type Network cable
- OM3 Technology Fibre optic Type of Fibre Optics Multimode Features Halogen-free Length 1 m Core / Cladding Diameter 50 / 125 micron Connector 2 x ST multi-mode
- male Connector (Second End) 2 x SC multi-mode
- male Colour Aqua Manufacturer Warranty Limited lifetime warranty





...

The short-range HDMI over Cat 5 Extender kit allows for the extension of HDMI audio/video signals over distances of up to 50 metres (160 feet) using two Cat 5 patch cables, making it the perfect solution for digital signage & other applications where the source device & display are a long distance apart. The short-range HDMI over Cat 5 extender supports high definition video up to a 1080p resolution, ensuring a high-quality, crisp picture. Auto equalisation makes for a straightforward plug & play installation, regardless of the length of the Cat 5 patch cables used. Simply make the HDMI & Cat 5 cable connections & the transmitter & receiver will automatically adjust to optimise the video for the length of cable used. This Extender supports both EDID pass through, ensuring that content is sent at the optimal resolution for the display, & High-Bandwidth Digital Content Protection (HDCP), allowing protected content to be passed through to the display. The maximum resolution supported will vary depending on the type & length of the Cat 5 patch cable. ...

C2G Smart 2-Port USB (Universal Serial Bus) Car Charger, 2.4A Output Charge multiple mobile devices from one DC outlet Features Two USB (Universal Serial Bus)-A female ports 5V, 2.4A maximum total output Smart-IC technology auto detects output requirements Accurate limited current output & overload protection Connector 1: DC Power Plug Connector 2: USB (Universal Serial Bus)-A Female Blue LED indicator when powered Fireproof shell material The Smart 2-Port USB (Universal Serial Bus) Car Charger is an ideal solution for charging mobile devices while on long road trips or short commutes. This high-performance car charger features a compact design for easy portability & provides a power output of 5V & 2.4A for device charging. ...

This Snap-In HDMI Keystone Insert Module means that you can custom-configure your keystone wall plates & patch panels for greater control & more flexibility & provides a full range of solutions for voice, home networking, home office, audio/video & more. Use this coupler for HDMI applications; just snap it into patch panels, compatible wall plates & surface boxes for a straightforward installation. ...

Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

One component of a robust solution that, when paired with a remote unit (part 89010, sold separately), extends your VGA & 3.5mm audio signals up to 300 meters over a Cat 5E UTP cable, & distributes the signal to 1 monitor, projector, or display. Ideal for applications when your VGA monitor needs to be placed beyond the average 30 meter VGA cable limitation, and/or you want to split the signal to multiple displays. Driving a VGA signal over Cat 5E helps you take advantage of your UTP cable infrastructure already there for a cost-effective & reliable installation. The Tru Link VGA over Cat 5 solution is ideal for applications when you need to place your computer in remote location. This is common in digital signage applications for retail stores, houses of worship, classrooms, & boardrooms where you need video presentation in one room, but want the computer to be out of sight & in a safe & secure environment. With the Tru Link VGA + 3.5mm audio over Cat 5 extender, you can place your display across the room, on another floor, or in another building while your computer remains in a convenient location. ...