For outdoor & indoor Swivel action Robust & safe Vandal & corrosion resistant: IK10- & NEMA 4X-rated AXIS T91B51 Ceiling Mount is compatible with all Axis PTZ dome cameras & outdoor models of Axis fixed domes. For low-ceiling environments AXIS T91B51 mount is ideal for environments with low ceilings. It lets you easily mount cameras extremely close to the ceiling. It is also appropriate for offshore & outdoor applications. If a longer pipe is needed there is a 30 cm (12 in) & a 100 cm (39 in) optional extension pipe available. In addition, it will stay perpendicular even when mounted on a sloped ceiling. Robust & safe AXIS T91B51 features a swivel function that allows it to swing safely out of the way if it is accidently hit by, for example, a tall vehicle or forklift. In addition, AXIS T91B51 is rated IK10 for vandal resistance & NEMA 4X for corrosion & salt spray resistance. ...

Powder coated aluminum extension pipes with a 1, 5” NPS thread for indoor & outdoor use. Available in two models, a 30 cm (12 in) pipe and a 100 cm (39 in) pipe. ...

A smart mount for poles of any size AXIS T91B57 Pole Mount is a versatile & robust, high-quality pole mount. While it can be used indoors, it’s particularly appropriate for outdoor installations under harsher conditions. The high-quality pole mount is designed for use with selected AXIS T91 wall mounts & AXIS T98A cabinet series. It is easily adjustable to fit poles with a diameter between 100–410 mm (4–16 in). A pole mount that can take it AXIS T91B57 Pole Mount has an IK10 rating for impact resistance, which safeguards it against vandalism. & it features a closed back & a cable gasket, which means it’s also protected against insect infestation. ...

Aluminum Pole Mount for indoor & outdoor installations, for poles with diameter between 100-410 mm (4"-16").



...

Aluminum parapet mount including AXIS T94A01D Pendant Kit (only used in combination with PTZ cameras) and AXIS T91A6 Pipe Seal. Also compatible with Axis pendant kits with 1.5” NPS or NPT inner thread, & Axis ACI 3/4” conduit adapters. The cables can be routed through the back, or from the side by using a conduit connection. ...

Robust & safe pole installation Suitable for indoor & outdoor use Impact-resistant to prevent vandalism Cable gasket to prevent insect infestation Support for 1.5" NPS threaded Axis pendant kits The outdoor-ready AXIS T91B67 Pole Mount has a 1.5" NPS threading for a wide range of Axis pendant kits for Axis fixed dome & panoramic cameras. Thanks to its impact-resistant & outdoor-proven material, the mount can be used in both indoor & outdoor environments. AXIS T91B67 is intended for poles with a diameter between 65–165 mm (2 1/2–6 1/2 in), & also for beams. It features 3/4" conduit side entries for protected cable runs, & a closed back with cable gasket for protection against insect infestation. The pole mount is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease & secure installation. ...

Aluminum wall mount with 1.5& Prime; NPS thread. Compatible with Axis fixed dome pendant kits & Axis ACI 3/4” conduit adapters. The cables can be routed through the back, or from the side by using a conduit connection.
Includes: AXIS T91A6 Pipe Seal.
...

AXIS T91E61 wall mount is specially designed for Axis fixed dome network cameras. The neat design is for both indoor & outdoor installations. Thanks to its impact-resistant & outdoor proven material, AXIS T91E61 wall mount suits all environments where Axis fixed dome cameras are used in. It is designed for being mounted with Axis cameras & gives a discreet look due to its small form factor. It is compatible with all Axis fixed dome pendant kits with a 1.5" NPS thread & can also be installed on AXIS T94R01P Conduit Back Box to enable use of cable protection conduits. AXIS T91E61 has the same hole pattern as the wall mount for outdoor fixed box Axis cameras to enable an easy switch. AXIS T91D61 wall mounts make sure that swapping two Axis cameras is as easy as possible. Moreover, it is possible to run the cable externally by using one of the four cut-outs in the base of the wall mount. ...

Roomy compartment for protection & connectivity AXIS T91G61 Wall Mount is specially designed to accommodate & safely protect against water ingress inside the mount, such as midspans & media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly & easily connecting power & data to most of Axis PTZ network cameras. Beautiful & yet strong Thanks to its impact-resistant & outdoor proven material, AXIS T91G61 Wall Mount suits all environments, both indoors & outdoors. AXIS T91G61 has the same hole pattern as the standard Axis PTZ wall mount & for retrofit, a pattern that matches Pelcos PTZ camera mount to enable an easy switch
- no additional drilling is required. Moreover, it is possible to run the cables externally by using the conduit holes on the base of the wall mount.
...

Designed for fixed dome cameras, AXIS T91H61 Wall Mount accommodates & safely protects accessories inside the mount. You can connect the power & data quickly & easily thanks to the built-in RJ45 cable with connector. The wall mount is designed to be impact- & weather-resistant (rain, dust & corrosion), & it is suitable for all environments both indoors & outdoors. You can mount it on poles & corners with the help of optional accessories. ...