Alphacool CKC Cape Kelvin Catcher Clear 1000ml Alphacool CKC is a specially developed coolant for PC watercooling systems. CKC is based on well-proven ingredients which were tested in industrial applications. This ensures maximum reliability & performance. CKC contains a special copper anticorrosive & does not contain Ethylene glycol, Ethandiol or other additives, offers the full thermal capacity of water & suppresses Algae & bacteria growth. It also contains additional inhibitors against corrosion. Alphacool does not use the standard anti-freeze ingredients which reduce the thermal capacity of the coolant but my be mixed with those. Coolants based on antifreeze require 25& antifreeze content to suppress algae & bacteria growth which lowers the thermal capacity. CKC is compatible with copper, brass, platings such as nickel, chrome, anodized Aluminum, Plexiglas (PMMA), POM & plastics for pump casings such as PPS-GF40 (Laing DDC amongst others) as well as PUR-, PVC- Tygon and Masterkleer tubing. Features & safety instructions Alphacool CKC: non-odorous & transparent, non-irritant Requires no hazard declaration Exempt from labelling regulations according to EG regulations/ Gef Stoff V The usual safety precautions when handling chemical substances must be followed Non-flammable, not self-combustive, not explosive Biologically degradable, not harmful to the environment S-phrases: S2 Keep out of the reach of children S20 When using do not eat or drink ...

Alphacool double nipple G1/4 outer thread to G1/4'' outer thread with O-ring
- deep black Alphacools's fittings go new ways in
...

Alphacool double nipple G1/4'' outer thread to G1/4'' outer thread revolvable
- deep black Alphacools's fittings go new ways in
...

With the Eisbaer, Alphacool is fundamentally revolutionising the AIO cooler market. Classic AIO cooler cannot be expanded or refilled but with the Alphacool Eisbaer the modular design means it can be expanded, rebuilt or refilled at any time. This means the Eisbaer is not just an AIO but is based entirely on classic water cooling components. That is, it is quieter & more powerful than the average AIO solution. The Radiator Alphacool relies on a solid copper radiator. The basis of the radiator is the popular Alphacool Nex Xxo S series which is very popular worldwide. The pure copper construction increases the cooling capacity enormously compared to the usual aluminum radiators of classic AIOs. The low fin density ensures enormous cooling performance on low speed fans. Thus, the performance of the Eisbaer when lowering the fan down much slower than with radiators with high density of fins. The Hoses The flexible PVC hoses facilitate the installation of Eisbaer. This makes it easier to lay the hoses & bring them into the right position. So that they do not bend & so the flow of water is stopped, can be found on both hoses buckling springs. The size 11 / 8mm also comes from the normal water cooling area & is here beside 13/10 & 16/10 a usual size. The Quick fasteners The Eisbaer has been designed directly for expandability. Therefore, you will find a quick release on one of the hoses. This quick release is compatible with the Alphacool HF quick release buckles, which makes it easy to expand the circuit around a radiator with a graphics card cooler. Furthermore, the Eisbaer is compatible with the upcoming Alphacool GPX-Pro graphics cards AIO which will use identical quick release fasteners. The Fans In cooperation with bequiet! The Eisbaer uses the Pure Wings 2 fans to push cool air between the cooling fins. Both fans are operated via a 3-pin connector. A Y-adapter is included in the Eisbaer, so both fans can be controlled via a port on their motherboard or a separate fan control. The Connections All connections are based on the classic G1 / 4 inch thread, the standard thread for water cooling. Therefore, all connections can be exchanged for others at any time if desired. This also means that, for example, they can later use thicker tubes or even hard tubes to make their system more individual. All these features make the Eisbaer cooler something very special. The upgraded look through the illuminated logo & the illuminated reservoir in which the pump is located, make the interior of each PC shine in new splendor. The soft-touch surface of the pump housing is another visual highlight. With the Eisbaer you get an all-round perfect product that is not only extremely powerful but can also work very quietly. The Pump The basis of the pump is the Alphacool DC-LT Ceramic Ultra Low Noise, which is also available separately. The pump runs very quietly & can be regulated from 7 to 12V. Also a regulation over the Mainboard is possible. Who operates the Eisbaer alone, will hardly have a performance loss on 7V as test results testify. The insulated pump housing further optimizes noise & also ensures that vibrations are almost completely absorbed. The bare & smooth polished copper bottom of the radiator also ensures optimum heat absorption & can pass these quickly & efficiently through the fine cross-slit structure of the radiator to the water. ...

With the Eisbaer, Alphacool is fundamentally revolutionising the AIO cooler market. Classic AIO cooler cannot be expanded or refilled but with the Alphacool Eisbaer the modular design means it can be expanded, rebuilt or refilled at any time. This means the Eisbaer is not just an AIO but is based entirely on classic water cooling components. That is, it is quieter & more powerful than the average AIO solution. The Radiator Alphacool relies on a solid copper radiator. The basis of the radiator is the popular Alphacool Nex Xxo S series which is very popular worldwide. The pure copper construction increases the cooling capacity enormously compared to the usual aluminum radiators of classic AIOs. The low fin density ensures enormous cooling performance on low speed fans. Thus, the performance of the Eisbaer when lowering the fan down much slower than with radiators with high density of fins. The Hoses The flexible PVC hoses facilitate the installation of Eisbaer. This makes it easier to lay the hoses & bring them into the right position. So that they do not bend & so the flow of water is stopped, can be found on both hoses buckling springs. The size 11 / 8mm also comes from the normal water cooling area & is here beside 13/10 & 16/10 a usual size. The Quick fasteners The Eisbaer has been designed directly for expandability. Therefore, you will find a quick release on one of the hoses. This quick release is compatible with the Alphacool HF quick release buckles (1010383, 1010394, 1010395, 1010442), which makes it easy to expand the circuit around a radiator with a graphics card cooler. Furthermore, the Eisbaer is compatible with the upcoming Alphacool GPX-Pro graphics cards AIO which will use identical quick release fasteners. The Fans In cooperation with bequiet! The Eisbaer uses the Pure Wings 2 fans to push cool air between the cooling fins. Both fans are operated via a 3-pin connector. A Y-adapter is included in the Eisbaer, so both fans can be controlled via a port on their motherboard or a separate fan control. The Connections All connections are based on the classic G1 / 4 inch thread, the standard thread for water cooling. Therefore, all connections can be exchanged for others at any time if desired. This also means that, for example, they can later use thicker tubes or even hard tubes to make their system more individual. All these features make the Eisbaer cooler something very special. The upgraded look through the illuminated logo & the illuminated reservoir in which the pump is located, make the interior of each PC shine in new splendor. The soft-touch surface of the pump housing is another visual highlight. With the Eisbaer you get an all-round perfect product that is not only extremely powerful but can also work very quietly. The Pump The basis of the pump is the Alphacool DC-LT Ceramic Ultra Low Noise, which is also available separately. The pump runs very quietly & can be regulated from 7 to 12V. Also a regulation over the Mainboard is possible. Who operates the Eisbaer alone, will hardly have a performance loss on 7V as test results testify. The insulated pump housing further optimizes noise & also ensures that vibrations are almost completely absorbed. The bare & smooth polished copper bottom of the radiator also ensures optimum heat absorption & can pass these quickly & efficiently through the fine cross-slit structure of the radiator to the water. ...

From the experts at Alphacool comes the modular complete water cooling Eisbaer. It heralds the Eisbaer Ready range, with which further Eisbaer products can be easily integrated into an existing system. The Eisbaer Ai Os from Alphacool are particularly inexpensive & yet equipped with high-quality components that come from the proven repertoire of Alphacool, such as the popular Nex Xxo S Radiator series, which serve as the basis for Eisbaer radiators. The Eisbaer LT120
- Large 120 mm radiator made from copper with only 25 mm depth
- CPU cooler made from solid copper with integrated pump
- Powerful 120 mm Eiswind 12 fan with 550 to 1700 rpm
- High quality 11/8 mm PVC hoses with woven sleeves
- Special quick-release fasteners for easy removal
- Pre-filled & easy to refill
- Copper instead of aluminum & a proven concept Radiator The radiator used is a long-proven high performing product from the Alphacool range meaning the AIO can offer optimium performance. Based on the design of the Alphacool Nex Xxo S radiator, but with a major change: The radiators are now only 25 mm deep & so fit into housings that do not offer so much space between the motherboard & cover. In addition, the radiators have two cooling chambers & are made from copper, which significantly increases the cooling efficiency. The low fin density also ensures that the fan is sufficiently cooled even at low speeds. Fan The 120 mm Ice Wind 12 fan also comes from Alphacool & was specially developed for use on radiators. With 1.66 mm H2O, they generate enormous air pressure to force cool air through the fins of the radiator. The fans are controlled by the PWM connector of the mainboard, a PWM Y adapter is included with the kit. Here, the number of revolutions from 550 to 1700 can be set to be. Efficient pump & copper heat sink The underside of the block, which serves as the CPU cooler, is also made from copper & has a finely corrugated surface on top, while the bottom is smooth to ensure the perfect contact to the CPU. This makes the transfer of waste heat from the CPU to the heat sink extremely efficient. On it is the DC-LT Ceramic Ultra Low Noise pump, also from Alphacool. Powered by a 3-pin Molex adapter, it delivers a flow rate of up to 70 liters per hour at a maximum of 2, 600 rpm. It is particularly quiet & can also be regulated between 7 & 13.5 volts. Because it is a complete water cooling system, of course no hoses need to be attached to the Ai O during installation. Nevertheless, Alphacool has equipped its system with quick-release closures that allow the Eisbaer to upgrade easily. They are compatible with the Alphacool HF quick-release fasteners. Thus, the inexpensive Eisbaer can easily expand to other components






...

From the experts at Alphacool comes the modular complete water cooling Eisbaer. It heralds the Eisbaer Ready range, with which further Eisbaer products can be easily integrated into an existing system. The Eisbaer Ai Os from Alphacool are particularly inexpensive & yet equipped with high-quality components that come from the proven repertoire of Alphacool, such as the popular Nex Xxo S Radiator series, which serve as the basis for Eisbaer radiators. The Eisbaer LT240
- Large 240 mm radiator made from copper with only 25 mm depth
- CPU cooler made from solid copper with integrated pump
- Powerful 120 mm Eiswind 12 fans with 550 to 1700 rpm
- High quality 11/8 mm PVC hoses with woven sleeves
- Special quick-release fasteners for easy removal
- Pre-filled & easy to refill
- Copper instead of aluminum & a proven concept Radiator The radiator used is a long-proven high performing product from the Alphacool range meaning the AIO can offer optimium performance. Based on the design of the Alphacool Nex Xxo S radiator, but with a major change: The radiators are now only 25 mm deep & so fit into housings that do not offer so much space between the motherboard & cover. In addition, the radiators have two cooling chambers & are made from copper, which significantly increases the cooling efficiency. The low fin density also ensures that the fan is sufficiently cooled even at low speeds. Fan The 120 mm Ice Wind 12 fan also comes from Alphacool & was specially developed for use on radiators. With 1.66 mm H2O, they generate enormous air pressure to force cool air through the fins of the radiator. The fans are controlled by the PWM connector of the mainboard, a PWM Y adapter is included with the kit. Here, the number of revolutions from 550 to 1700 can be set to be. Efficient pump & copper heat sink The underside of the block, which serves as the CPU cooler, is also made from copper & has a finely corrugated surface on top, while the bottom is smooth to ensure the perfect contact to the CPU. This makes the transfer of waste heat from the CPU to the heat sink extremely efficient. On it is the DC-LT Ceramic Ultra Low Noise pump, also from Alphacool. Powered by a 3-pin Molex adapter, it delivers a flow rate of up to 70 liters per hour at a maximum of 2, 600 rpm. It is particularly quiet & can also be regulated between 7 & 13.5 volts. Because it is a complete water cooling system, of course no hoses need to be attached to the Ai O during installation. Nevertheless, Alphacool has equipped its system with quick-release closures that allow the Eisbaer to upgrade easily. They are compatible with the Alphacool HF quick-release fasteners. Thus, the inexpensive Eisbaer can easily expand to other components or hose extensions.






...

From the experts at Alphacool comes the modular complete water cooling Eisbaer. It heralds the Eisbaer Ready range, with which further Eisbaer products can be easily integrated into an existing system. The Eisbaer Ai Os from Alphacool are particularly inexpensive & yet equipped with high-quality components that come from the proven repertoire of Alphacool, such as the popular Nex Xxo S Radiator series, which serve as the basis for Eisbaer radiators. The Eisbaer LT360
- Large 360 mm radiator made from copper with only 25 mm depth
- CPU cooler made from solid copper with integrated pump
- Powerful 120 mm Eiswind 12 fan with 550 to 1700 rpm
- High quality 11/8 mm PVC hoses with woven sleeves
- Special quick-release fasteners for easy removal
- Pre-filled & easy to refill
- Copper instead of aluminum & a proven concept Radiator The radiator used is a long-proven high performing product from the Alphacool range meaning the AIO can offer optimium performance. Based on the design of the Alphacool Nex Xxo S radiator, but with a major change: The radiators are now only 25 mm deep & so fit into housings that do not offer so much space between the motherboard & cover. In addition, the radiators have two cooling chambers & are made from copper, which significantly increases the cooling efficiency. The low fin density also ensures that the fan is sufficiently cooled even at low speeds. Fan The 120 mm Ice Wind 12 fan also comes from Alphacool & was specially developed for use on radiators. With 1.66 mm H2O, they generate enormous air pressure to force cool air through the fins of the radiator. The fans are controlled by the PWM connector of the mainboard, a PWM Y adapter is included with the kit. Here, the number of revolutions from 550 to 1700 can be set to be. Efficient pump & copper heat sink The underside of the block, which serves as the CPU cooler, is also made from copper & has a finely corrugated surface on top, while the bottom is smooth to ensure the perfect contact to the CPU. This makes the transfer of waste heat from the CPU to the heat sink extremely efficient. On it is the DC-LT Ceramic Ultra Low Noise pump, also from Alphacool. Powered by a 3-pin Molex adapter, it delivers a flow rate of up to 70 liters per hour at a maximum of 2, 600 rpm. It is particularly quiet & can also be regulated between 7 & 13.5 volts. Because it is a complete water cooling system, of course no hoses need to be attached to the Ai O during installation. Nevertheless, Alphacool has equipped its system with quick-release closures that allow the Eisbaer to upgrade easily. They are compatible with the Alphacool HF quick-release fasteners. Thus, the inexpensive Eisbaer can easily expand to other components or hose extensions






...

With the new Eissturm kits, you get all the components you need to get started in the world of water cooling. The sets are aimed not only at beginners but also at professionals. All components used are optimally matched to each other & come from the high-end series from Alphacool. Alphacool does not compromise on the materials & uses pure copper or brass for all metals. This guarantees outstanding cooling performance. With the set you can play cool your CPU, also they can integrate any graphics card cooler into the circuit. To do this they do not have to drain or rebuild the circuit thanks to an enclosed quick release. The products in detail: Radiator: Nex Xxo S ST30 Full Copper 360 mm For many years Alphacool has been a leader in radiators. Through the consistent use of pure copper for the cooling fins, atria & the channels, the Alphacool radiators are leaders in performance. The Alphacool Nex Xxo S radiators offer outstanding performance when using low-speed fans & provide a high power reserve when a lot of heat needs to be dissipated. This allows them to cover a wide range of applications. CPU Cooler: XPX The Alphacool Eisblock XPX Cooler has repeatedly been named the most powerful CPU cooler on the market in independent tests. In addition to excellent workmanship, care was taken to ensure that the cooler bottom is large enough for CPUs that rely on eight or more physical CPU cores. If you want to customize your CPU cooler, you can use modding kits from Alphacool. The CPU cover, the screw caps & the support frame can be exchanged for other colors. Reservoir: Eisstation The expansion tank Eisstation is a relatively compact AGB solution with integrated pump top. The pump is completely enclosed by the housing while the water is visible in the transparent nylon housing. Nylon is much more resistant than Plexiglas & almost unbreakable. The assembly takes place either in the 5 14; "shaft or over a velcro mat which is freely positionable in the housing. Pump: DDC310 Alphacool has further optimized the classic DDC pump & launched a version of the DDC310 that runs extremely quietly &, in most cases, does not require any further adjustment. The DDC310 is a perfect compromise between performance & volume. It is strong enough to run larger water cycles, but remains so quiet that it is barely noticeable from within a case. The design is slightly more compact than the VPP755, which can be an advantage in very tight enclosures. Fans Eiswind Pure Edition The new Eiswind fans in the Pure Edition are based on the globally popular be quiet! Fans. The finely corrugated fan blades ensure optimum airflow & targeted turbulence to minimize noise. The high-quality rifle bearing also contributes to a high level of smoothness. The fans can be controlled via the 4-pin PWM connection. The fans can be controlled over a wide speed range. Connections & quick release Alphacool makes no compromises when it comes to connections. All connections come from the High End icicle series & are made entirely of anodized brass. Thanks to the wide ribbed outer surface, it is very easy to screw in the connections. The union nut presses the hose firmly to the connection & contributes to the safety, because so the hose can only be demolished with a considerable force. The enclosed quick release makes the set Eisbaer Ready. Many products such as the Ice Wolf GPX-Pro cooler, the external water-cooling solution Eiswand & other Alphacool products rely on this quick-release closure. This allows them to easily & quickly connect or disconnect the products. The set is everything you need for the start. Hoses, the necessary fluid, a filling aid, Y-adapter for the fans & much more. The manual is very extensive with many pictures describing all parts in their function. With an Eissturm set you get the perfect set for your water cooling. ...

With the new Eissturm kits, you get all the components you need to get started in the world of water cooling. The sets are aimed not only at beginners but also at professionals. All components used are optimally matched to each other & come from the high-end series from Alphacool. Alphacool does not compromise on the materials & uses pure copper or brass for all metals. This guarantees outstanding cooling performance. With the set you can cool your CPU, also you can integrate any graphics card cooler into the circuit. To do this you do not have to drain or rebuild the circuit thanks to an enclosed quick release. The products in detail: Radiator: Nex Xxo S XT45 Full Copper 240 mm For many years Alphacool has been a leader in radiators. Through the consistent use of pure copper for the cooling fins, atria & the channels, the Alphacool radiators are leaders in performance. The Alphacool Nex Xxo S radiators offer outstanding performance when using low-speed fans & provide a high power reserve when a lot of heat needs to be dissipated. This allows them to cover a wide range of applications. CPU Cooler: XPX The Alphacool Eisblock XPX Cooler has repeatedly been named the most powerful CPU cooler on the market in independent tests. In addition to excellent workmanship, care was taken to ensure that the cooler bottom is large enough for CPUs that rely on eight or more physical CPU cores. If you want to customize your CPU cooler, you can use modding kits from Alphacool. The CPU cover, the screw caps & the support frame can be exchanged for other colors. Reservoir With the Alphacool Eisbecher, Alphacool has launched a superior reservoir that offers not only high quality & compatibility but also the well-known Lighttower water effect. The water flows up a riser & we then sprayed against the inside of the expansion tank. A real visual highlight. The mounting options are also very extensive. The Eisbecher can be mounted directly on a radiator or with normal feet on the bottom of the case. Pump: DDC310 Alphacool has further optimized the classic DDC pump & launched a version of the DDC310 that runs extremely quietly &, in most cases, does not require any further adjustment. The DDC310 is a perfect compromise between performance & volume. It is strong enough to run larger water cycles, but remains so quiet that it is barely noticeable from within a case. The design is slightly more compact than the VPP755, which can be an advantage in very tight enclosures. Fans Eiswind Pure Edition The new Eiswind fans in the Pure Edition are based on the globally popular be quiet! Fans. The finely corrugated fan blades ensure optimum airflow & targeted turbulence to minimize noise. The high-quality rifle bearing also contributes to a high level of smoothness. The fans can be controlled via the 4-pin PWM connection. The fans can be controlled over a wide speed range. Connections & quick release Alphacool makes no compromises when it comes to connections. All connections come from the High End icicle series & are made entirely of anodized brass. Thanks to the wide ribbed outer surface, it is very easy to screw in the connections. The union nut presses the hose firmly to the connection & contributes to the safety, because so the hose can only be demolished with a considerable force. The enclosed quick release makes the set Eisbaer Ready. Many products such as the Ice Wolf GPX-Pro cooler, the external water-cooling solution Eiswand & other Alphacool products rely on this quick-release closure. This allows them to easily & quickly connect or disconnect the products. ...