The AT-SPBD10-14 SFP Module offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable, fiber interfaces simply plug into a SFP slot on Allied Telesyn SFP compatible products. Configurations can be optimised to meet varied distance & service requirements. ...

Allied Telesis AT-SPFX/2 SFP
- 1 LC 100 Base-FX Network
- For Data Networking, Optical Network
- Optical Fiber
- Multi-mode
-




...

Allied Telesis AT-SPLX10A. SFP transceiver type: Fiber optic, Maximum data transfer rate: 1000 Mbit/s, Interface type: SFP. Product

Colour: Silver, Housing

Material: Metal. Number of products included: 1 pc (s) Gigabit Small Form-Factor Pluggable Modules The Allied Telesis SP Series delivers flexible, full-duplex Ethernet connectivity. These hot-swappable fiber & copper interfaces simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance & service requirements.



...

Allied Telesis AT-SPTX/I SFP (mini-GBIC)
- 1 RJ-45 Duplex 10/100/1000 Base-T Network LAN
- For Data Networking
- Twisted


...

Enterprise-Class Outdoor Wireless Access Point The Allied Telesis AT-TQ4400e Enterprise-Class Outdoor Wireless Access Point features dual radio for concurrent 2.4/5 G Hz operations with a high-powered amplifier & IEEE 802.11ac 2ss technology, capable of 1175 Mbps raw wireless capacity. The AT-TQ4400e is based on IEEE 802.11ac, with two-spatial-stream Multiple Input & Multiple Output (MIMO), which can deliver more than twice the wireless capacity of 802.11n Access Points (AP)s. The AT-TQ4400e may operate either in standalone or AP-cluster mode, or be controlled by the UWC controller. It is suitable for a wide range of deployments—from SMBs to large Enterprises. In large deployments with centralized control & management by UWC WLAN controller, operating costs are kept low by making the network simple to configure, monitor & manage. For smaller deployments, without the UWC controller, the APs can function either as standalone APs or as a cluster of APs. When operating as a cluster, the APs are grouped to share the configuration & manage the channel automatically, & there is a single point of management, allowing easy control of all Access Points. This reduces the cost for multiple AP configuration & operation management. The AT-TQ4400e is equipped with advanced encryption & authentication IEEE 802.11i capabilities. It protects a WLAN by segmenting public & private access with multiple Service Set Identifications (SSIDs) & VLAN Tagging. Rogue access point detection provides the ability to detect unauthorized access points, thus preventing unauthorized entry to the wireless network. The AT-TQ4400e can be deployed in harsh outdoor environments & is accompanied by a wall/pole mounting kit & four omni-directional antennas. Power is supplied via Power over Ethernet (IEEE 802.11at, Po E Plus). ...

3-radio 802.11ac Wave 2 Wireless Access Point The Allied Telesis Enterprise-class TQm 5403 is a three-radio wireless LAN access point that supports IEEE802.11ac Wave 2, & is ideal for small to medium enterprise networks, providing a high-value & easily deployed wireless solution. Capable of up to 2133 Mbps raw wireless throughput from its single 2.4 G Hz radio & dual 5 G Hz IEEE 802.11ac radios, the TQm 5403 supports Multi-User Multiple Input & Multiple Output (MU-MIMO), allowing multiple clients to send & receive data at the same time, substantially increasing throughput for a better user experience. The TQm 5403 can operate in standalone mode, using its intuitive web-based user interface. For medium scale installations it can be managed by Allied Telesis Autonomous Wave Control (AWC). With AWC, the wireless network is regularly analyzed, & APs are dynamically updated to reduce interference, minimize coverage gaps, & optimize performance—all with no user intervention. Overview The Allied Telesis TQm 5403 is a three-radio wireless LAN access point that supports IEEE802.11ac Wave 2, & is ideal for small to medium enterprise networks, providing a high-value & easily deployed wireless solution. The TQm 5403 has a single 2.4 G Hz radio & dual 5 G Hz IEEE 802.11ac radios, & supports Multi-User Multiple Input & Multiple Output (MU-MIMO), allowing multiple clients to send & receive data at the same time, substantially increasing throughput. Combined with a comprehensive feature-set, the APs provide superior wireless connectivity. The TQm 5403 can operate in standalone mode, using its intuitive web-based user interface. For medium scale installations it can be managed by Allied Telesis Autonomous Wave Control (AWC). With AWC, the wireless network is regularly analyzed, & APs are dynamically updated to reduce interference, minimize coverage gaps, & optimize performance—all with no user intervention. The Allied Telesis network management platform, Vista Manager EX, has an AWC wireless management plugin that supports up to 100 APs. Flexible deployment options enable easy installation, with the TQm 5403 able to be used on the desktop or mounted on a wall or ceiling. Power may be supplied by Power over Ethernet, for the simplicity of having the Ethernet network connect & power the APs, or by an optional AC power adapter. ...

The AT-TRAY1 is a "shelf " style unit designed to hold one Allied Telesis standalone media converter. The AT-TRAY1 can be installed on any type of standard rack rail or it can be wall-mounted. It is designed to be installed vertically to the inside or outside of the rack rail. ...

The Allied Telesis x 220 Series are fully-managed high-performing Gigabit Layer 3 switches. Integrated security features, plus 28 SFP or 48 Gigabit copper ports, make them the ideal choice for long-distance fiber or high-density copper connectivity at the edge of the network. The x 220-28GS features 24 x 100/1000X SFP slots & 4 x 100/1000X SFP uplinks to provided extended reach at the network edge in distributed environments. Secure data transfer is ensured with Allied Telesis Active Fiber Monitoring (AFM) preventing data eavesdropping on all short & long-distance fiber links. The x 220-52GP/GT have 48 x 10/100/1000T RJ-45 copper ports & 4x 100/1000X SFP uplinks. The Power over Ethernet Plus (Po E+) model (52GP) is an ideal solution for connecting & remotely powering wireless access points, IP video surveillance cameras & IP phones. A comprehensive feature-set provides an excellent access solution for today’s networks, with high performance gigabit throughput. Resilient Allied Telesis Ethernet Protection Switched Ring (EPSRing™) enables distributed network segments to have resilient high-speed access to online resources & applications, & provides continuous traffic flow even during unscheduled outages. Powerful network management Meeting the increased management requirements of modern converged networks, Allied Telesis Autonomous Management Framework™ (AMF) automates many everyday tasks including configuration management. The entire network can be managed as a single virtual device with powerful centralized management features. Growing the network can be accomplished with plug-&-play simplicity, & network node recovery is fully zero-touch. AMF secure mode increases network security with management traffic encryption, authorization & monitoring. Secure Network security is guaranteed, with powerful control over all traffic types, secure management options, & other multi-layered security features built right into the x 220 Series. Network Access Control (NAC) gives unprecedented control over user access to the network, successfully mitigating threats to network infrastructure. The x 220 Series use 802.1x port-based authentication, in partnership with standards-compliant dynamic VLAN assignment, to assess a user’s adherence to network security policies & either grant access or offer remediation. Tri-authentication ensures the network is only accessed by known users & devices. Secure access is also available for guests. Security from malicious network attacks is provided by a comprehensive range of features such as DHCP snooping, STP root guard, BPDU protection & access control lists. Each of these can be configured to perform a variety of actions upon detection of a suspected attack. Network protection Advanced storm protection features include bandwidth limiting, policy-based storm protection & packet storm protection. Network storms are often caused by cabling errors that result in a network loop. The x 220 Series provides features to detect loops as soon as they are created. Loop detection & thrash limiting take immediate action to prevent network storms. Effortless management The x 220 Series runs the advanced Allied Ware Plu™ fully featured operating system, delivering a rich feature set & an industry-standard Command Line Interface (CLI). This reduces training requirements & is consistent across all Allied Ware Plus devices, simplifying network management. The web-based Graphical User Interface (GUI) is an easy-to-use & powerful management tool, with comprehensive monitoring facilities. ...

The Allied Telesis x 220 Series are fully-managed high-performing Gigabit Layer 3 switches. Integrated security features, plus 28 SFP or 48 Gigabit copper ports, make them the ideal choice for long-distance fiber or high-density copper connectivity at the edge of the network. The x 220-28GS features 24 x 100/1000X SFP slots & 4 x 100/1000X SFP uplinks to provided extended reach at the network edge in distributed environments. Secure data transfer is ensured with Allied Telesis Active Fiber Monitoring (AFM) preventing data eavesdropping on all short & long-distance fiber links. The x 220-52GP/GT have 48 x 10/100/1000T RJ-45 copper ports & 4x 100/1000X SFP uplinks. The Power over Ethernet Plus (Po E+) model (52GP) is an ideal solution for connecting & remotely powering wireless access points, IP video surveillance cameras & IP phones. A comprehensive feature-set provides an excellent access solution for today’s networks, with high performance gigabit throughput. Resilient Allied Telesis Ethernet Protection Switched Ring (EPSRing™) enables distributed network segments to have resilient high-speed access to online resources & applications, & provides continuous traffic flow even during unscheduled outages. Powerful network management Meeting the increased management requirements of modern converged networks, Allied Telesis Autonomous Management Framework™ (AMF) automates many everyday tasks including configuration management. The entire network can be managed as a single virtual device with powerful centralized management features. Growing the network can be accomplished with plug-&-play simplicity, & network node recovery is fully zero-touch. AMF secure mode increases network security with management traffic encryption, authorization & monitoring. Secure Network security is guaranteed, with powerful control over all traffic types, secure management options, & other multi-layered security features built right into the x 220 Series. Network Access Control (NAC) gives unprecedented control over user access to the network, successfully mitigating threats to network infrastructure. The x 220 Series use 802.1x port-based authentication, in partnership with standards-compliant dynamic VLAN assignment, to assess a user’s adherence to network security policies & either grant access or offer remediation. Tri-authentication ensures the network is only accessed by known users & devices. Secure access is also available for guests. Security from malicious network attacks is provided by a comprehensive range of features such as DHCP snooping, STP root guard, BPDU protection & access control lists. Each of these can be configured to perform a variety of actions upon detection of a suspected attack. Network protection Advanced storm protection features include bandwidth limiting, policy-based storm protection & packet storm protection. Network storms are often caused by cabling errors that result in a network loop. The x 220 Series provides features to detect loops as soon as they are created. Loop detection & thrash limiting take immediate action to prevent network storms. Effortless management The x 220 Series runs the advanced Allied Ware Plu™ fully featured operating system, delivering a rich feature set & an industry-standard Command Line Interface (CLI). This reduces training requirements & is consistent across all Allied Ware Plus devices, simplifying network management. The web-based Graphical User Interface (GUI) is an easy-to-use & powerful management tool, with comprehensive monitoring facilities.
- Allied Telesis Autonomous Management Framework TM (AMF)
- Active Fiber Monitoring
- Allied Ware Plus operating system
- EPSRTM & G.8032 high-speed ring connectivity
- Management stacking
- Static routing & RIP
- DHCP snooping
- EEE 802.1x/MAC/ Web authentication support
- Po E+ supplies up to 30W per port
- Po E power budget of 740 Watts
- Continuous Po E










...

Allied Telesis AT-X230-10GP 8 Ports Manageable Ethernet Switch
- 2 Layer Supported
- Rack-mountable, Desktop The Allied Telesis

...