Allied Telesis AT-SP10SR SFP+ The AT-SP10SR is a hot pluggable 10 Gbps small form factor transceiver Module. It is compliant with the SFF-8431 SFP+ Electrical Multi-source Agreement (MSA) with five digital monitoring functions: Temperature, Vcc, Tx optical power, Tx laser bias current & Rx received optical power. ...

Allied Telesis AT-SP10TW1 1 m Twinaxial Network Cable for Network Device
- First End: 1 x SFP+ Network
- Second End: 1 x SFP+

...

Allied Telesis AT-SP10TW3 3 m Network Cable for Network Device
- First End: 1 x SFP+ Male Network
- Second End: 1 x SFP+ Male

...

Allied Telesis AT-SP10TW7 7 m Network Cable for Network Device
- First End: 1 x SFP+ Male Network
- Second End: 1 x SFP+ Male

...

The AT-SPBD10-14 SFP Module offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable, fiber interfaces simply plug into a SFP slot on Allied Telesyn SFP compatible products. Configurations can be optimised to meet varied distance & service requirements. ...

Allied Telesis AT-SPLX10A. SFP transceiver type: Fiber optic, Maximum data transfer rate: 1000 Mbit/s, Interface type: SFP. Product

Colour: Silver, Housing

Material: Metal. Number of products included: 1 pc (s) Gigabit Small Form-Factor Pluggable Modules The Allied Telesis SP Series delivers flexible, full-duplex Ethernet connectivity. These hot-swappable fiber & copper interfaces simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance & service requirements.



...

Allied Telesis AT-SPTX/I SFP (mini-GBIC)
- 1 RJ-45 Duplex 10/100/1000 Base-T Network LAN
- For Data Networking
- Twisted


...

Enterprise-Class Outdoor Wireless Access Point The Allied Telesis AT-TQ4400e Enterprise-Class Outdoor Wireless Access Point features dual radio for concurrent 2.4/5 G Hz operations with a high-powered amplifier & IEEE 802.11ac 2ss technology, capable of 1175 Mbps raw wireless capacity. The AT-TQ4400e is based on IEEE 802.11ac, with two-spatial-stream Multiple Input & Multiple Output (MIMO), which can deliver more than twice the wireless capacity of 802.11n Access Points (AP)s. The AT-TQ4400e may operate either in standalone or AP-cluster mode, or be controlled by the UWC controller. It is suitable for a wide range of deployments—from SMBs to large Enterprises. In large deployments with centralized control & management by UWC WLAN controller, operating costs are kept low by making the network simple to configure, monitor & manage. For smaller deployments, without the UWC controller, the APs can function either as standalone APs or as a cluster of APs. When operating as a cluster, the APs are grouped to share the configuration & manage the channel automatically, & there is a single point of management, allowing easy control of all Access Points. This reduces the cost for multiple AP configuration & operation management. The AT-TQ4400e is equipped with advanced encryption & authentication IEEE 802.11i capabilities. It protects a WLAN by segmenting public & private access with multiple Service Set Identifications (SSIDs) & VLAN Tagging. Rogue access point detection provides the ability to detect unauthorized access points, thus preventing unauthorized entry to the wireless network. The AT-TQ4400e can be deployed in harsh outdoor environments & is accompanied by a wall/pole mounting kit & four omni-directional antennas. Power is supplied via Power over Ethernet (IEEE 802.11at, Po E Plus). ...

Allied Telesis TQ5403e IEEE 802.11ac 2.13 Gbit/s Wireless Access Point
- 2.40 GHz, 5 GHz
- MIMO Technology
- 1 x Network


...

3-radio 802.11ac Wave 2 Wireless Access Point The Allied Telesis Enterprise-class TQm 5403 is a three-radio wireless LAN access point that supports IEEE802.11ac Wave 2, & is ideal for small to medium enterprise networks, providing a high-value & easily deployed wireless solution. Capable of up to 2133 Mbps raw wireless throughput from its single 2.4 G Hz radio & dual 5 G Hz IEEE 802.11ac radios, the TQm 5403 supports Multi-User Multiple Input & Multiple Output (MU-MIMO), allowing multiple clients to send & receive data at the same time, substantially increasing throughput for a better user experience. The TQm 5403 can operate in standalone mode, using its intuitive web-based user interface. For medium scale installations it can be managed by Allied Telesis Autonomous Wave Control (AWC). With AWC, the wireless network is regularly analyzed, & APs are dynamically updated to reduce interference, minimize coverage gaps, & optimize performance—all with no user intervention. Overview The Allied Telesis TQm 5403 is a three-radio wireless LAN access point that supports IEEE802.11ac Wave 2, & is ideal for small to medium enterprise networks, providing a high-value & easily deployed wireless solution. The TQm 5403 has a single 2.4 G Hz radio & dual 5 G Hz IEEE 802.11ac radios, & supports Multi-User Multiple Input & Multiple Output (MU-MIMO), allowing multiple clients to send & receive data at the same time, substantially increasing throughput. Combined with a comprehensive feature-set, the APs provide superior wireless connectivity. The TQm 5403 can operate in standalone mode, using its intuitive web-based user interface. For medium scale installations it can be managed by Allied Telesis Autonomous Wave Control (AWC). With AWC, the wireless network is regularly analyzed, & APs are dynamically updated to reduce interference, minimize coverage gaps, & optimize performance—all with no user intervention. The Allied Telesis network management platform, Vista Manager EX, has an AWC wireless management plugin that supports up to 100 APs. Flexible deployment options enable easy installation, with the TQm 5403 able to be used on the desktop or mounted on a wall or ceiling. Power may be supplied by Power over Ethernet, for the simplicity of having the Ethernet network connect & power the APs, or by an optional AC power adapter. ...