Tripplite 3600w Inverter With Automatic Transfer Switch And Charger
(30a Hardwired)

Tripp Lite's APSINT3636VR 3-function DC to AC inverter with auto line-to-battery transfer and integrated charging system serves as an extended run, line interactive UPS or a standalone power source. Supplies up to 3600 watts of continuous 230V AC power from a 36 volt DC source. When hardwire input AC cable is energized, regulated commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. Built-in voltage regulation adjusts brownouts and overvoltages back to usable levels without using battery power. In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries
and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet / gel battery types and selectable line to battery power transfer voltages. Key Features Supports 230V AC output from a 230V AC line power source or 12V DC battery source 20 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time Double
Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart) OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. 3 stage, 30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging 3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status Set of 4 configuration dipswitches support
wet/gel battery charging profiles, adjustable 259/264V high voltage auto transfer during overvoltages and selectable 144/163/182/201V AC low voltage auto transfer during brownouts Set of 4 additional configuration dip switches support 4 levels of charger limiting relative to output load size Resettable 10A charger AC input breaker and resettable 15A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory) Please note: networking components such as switches, routers, UPS and wireless devices require that speeds
& standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.