Tripp Lite's APSINT2012 DC-to-AC inverter with automatic line-to-battery transfer & integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 230V AC power from any 12V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment & the battery set is recharged via 3 stage, selectable 15/60 amp charging system. In UPS mode, the APS system responds to blackouts & voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output.

Includes:: a set of high current DC input terminals for simple installation (user supplies batteries & cabling
- see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging & UPS line power operation, plus efficient PWM sine wave AC output in inverter & UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors & other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching & continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications & site conditions with adjustable charger settings for wet/gel battery types & selectable line to battery power transfer voltages. 12V DC or 230V AC input; 230V, 50 Hz output (hardwired) 2000 watts continuous, 3000 watts Over Power & 4000 watts Double Boost inverter output (see specifications) 3 stage, selectable 15/60 amp wet/dry cell battery charger Auto Transfer Switching option for battery backup / UPS operation Reliability enhanced large-transformer design with protected DC & AC wiring terminals Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

This product is a 2200VA on-line, double-conversion UPS system for critical server, network & telecommunications equipment. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 130V & overvoltages to 275V. Network management interfaces support simultaneous communications via USB (Universal Serial Bus) port, DB9 serial port & SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data & utility power conditions via all 3 network interfaces. Integrated 2-bank PDU switching supports load shedding & remote-reboot of connected equipment. LED display panel easily rotates for better viewing in rackmount or tower configurations. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Tripp Lite's SMX2200XLRT2U intelligent, line-interactive rack/tower uninterruptible power supply prevents data loss, downtime & equipment damage due to power outages, voltage fluctuations & transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 17 min. half-load runtime & 6 min. at full load. Runtime is expandable with optional BP48V24-2U or BP48V60RT-3U external battery packs. Maintains regulated 230V nominal output without using battery power during brownouts & overvoltages from 158-290V. 2200VA/1600W power handling capability & full-time sine wave output offers guaranteed compatibility with networking, telecom & other sensitive electronic applications. 8 C13 outlets including 3 load banks (1 outlet each) that are individually switchable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. It supports simultaneous remote monitoring of UPS & site power conditions via built-in USB (Universal Serial Bus) & DB9 monitoring ports. HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X.

Includes:: Power Alert UPS monitoring & unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS & connected equipment in case of fire or emergency. Multi-function audible alarms & 5 front panel LEDs offer at-a-glance notification of UPS & line power status. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges & line noise. Attractive all-black color scheme. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Tripp Lite's SUINT3000RTXL3U UPS System offers complete power conditioning & battery support for critical fileservers & internetworking equipment in a versatile 3U rack/tower configuration. Offers compatibility with 200/208/220/230/240V applications at 50/60 Hz. Double conversion power conditioning process removes line noise, voltage fluctuations & frequency variations by converting incoming AC to DC, then back to universally compatible pure sine wave AC output. Standard internal batteries offer seamless support of connected equipment during power failures with zero transfer time. Support through extended power failures is available with the addition of 2U rack/tower compatible battery packs BP72V15-2U (limit 1), BP72V28RT-3U (multi-pack compatible) & BP72V18-2US (multi-pack compatible). Maintains continuous output over an input range of 160 to 275V without depleting battery reserves. True online, double-conversion power conditioning offers enhanced, network-grade pure sine wave AC power for critical fileservers, internetworking equipment & sensitive electronics Maintains output within 2% of selectable 200/208/220/230/240V at 50/60 Hz (+/-0.05 Hz) Neutralizes frequency variations, fast electrical impulses, harmonics & other hard-to-solve power problems not addressed by other UPS types Versatile rack/tower format requires only 3 rack spaces (3U) in rackmount applications; included tower stand set supports upright configuration ...

Tripp Lite's SMX3000XLRT2U is an intelligent, line interactive rack/tower uninterruptible power supply that prevents data loss, downtime & equipment damage due to power outages, voltage fluctuations & transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 13 minutes half load runtime & 4 minutes at full load. Runtime is expandable with optional BP48V24-2U or BP48V60RT-3U external battery packs. Maintains regulated 230V nominal output without using battery power during brownouts & overvoltages from 151 to 282V. 3000VA / 2250 watt power handling capability & full time sine wave output offers guaranteed compatibility with networking, telecom & other sensitive electronic applications.

Includes:: a total of 9 outlets arranged in 3 load banks that are individually switchable via software interface to reboot select equipment on demand or automatically shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS & site power conditions via built-in USB (Universal Serial Bus) & DB9 monitoring ports.

Includes:: Power Alert UPS monitoring & unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS & connected equipment in the case of fire or emergency. Multi-function audible alarms & set of 5 front panel LEDs offer at-a-glance notification of UPS & line power status. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges & line noise. Attractive all-black color scheme. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite Switched PDU / Power Distribution Unit offers advanced network control & monitoring with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions & remotely monitor output power consumption. Power Alert interface supports remote control & custom notification of user-specified conditions via email, secure web, SNMP, Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or be custom programmed for user-defined power-up & power-down sequences to ensure proper startup of interdependent IT systems & prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU output current consumption in amps is displayed locally via visual meter & remotely via web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. Switched 32A 230V PDU; 0U Vertical Rackmount Reports voltage, frequency & loading information via ethernet interface Visual current meter; Toolless button mount installation Attached 10ft / 3m input cord with IEC309 32A (2P+E) input 24 switched outlets (20 C13; 4 C19); cord retention brackets Temperature, humidity & contact-closure monitoring options Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Tripp Lite's APSINT3636VR 3-function DC to AC inverter with auto line-to-battery transfer & integrated charging system serves as an extended run, line interactive UPS or a standalone power source. Supplies up to 3600 watts of continuous 230V AC power from a 36 volt DC source. When hardwire input AC cable is energized, regulated commercial power passes through to connected equipment & the battery set is recharged via 3 stage, 30 amp charging system. Built-in voltage regulation adjusts brownouts & overvoltages back to usable levels without using battery power. In UPS mode, the APS system responds to blackouts & brownouts with an uninterrupted transfer to battery-derived AC output.

Includes:: a set of high current DC input terminals for simple installation (user supplies batteries & cabling). Reliable large transformer design with efficient PWM sine wave output & frequency control powers resistive electronic loads or large inductive motors, compressors & other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications & site conditions with adjustable charger settings for wet / gel battery types & selectable line to battery power transfer voltages. Key Features Supports 230V AC output from a 230V AC line power source or 12V DC battery source 20 millisecond automatic transfer between line & battery power supports UPS protection during blackouts & voltage fluctuations for equipment compatible with a one cycle transfer time Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see

Specification chart) Over Power inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery & temperature conditions. 3 stage, 30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging 3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC & AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer & SYSTEM OFF settings Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status & system fault status Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 259/264V high voltage auto transfer during overvoltages & selectable 144/163/182/201V AC low voltage auto transfer during brownouts Set of 4 additional configuration dip switches support 4 levels of charger limiting relative to output load size Resettable 10A charger AC input breaker & resettable 15A AC output breaker & automatic 2 speed cooling fan protect the inverter from load & temperature related failures Automatic overload & thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory) Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

You can power electrical appliances in your car with Tripp Lite's PVINT375 DC-to-AC power inverter. Convert 12 volt DC power from your automotive cigarette lighter jack to modified sine wave AC power compatible with 220-240 volt/50 Hz equipment. 375 watt continuous/600 watt instantaneous peak surge power handling capability powers laptop computers, battery chargers, TV/VCRs, gaming systems & small power tools. Universal outlet accepts French, German & UK style connectors, plus a variety of international plug sets. Rugged, all-metal case design withstands abuse in a compact format weighing Approx. 1 kg. Built-in low-battery alarm & auto-shutoff prevents deep battery discharge. ...

Tripp Lite's SMX5000XLRT3U is a 5000VA line interactive UPS for server, network & telecommunications equipment. This UPS contains internal batteries & requires only 3 rack spaces when installed. A nominal input voltage of 230V is accepted. The SMX5000XLRT3U corrects brownouts & overvoltages from 170 to 282V & maintains battery derived AC output during blackouts & severe voltage fluctuations. Expandable runtime exists with optional external battery packs. Unit has 11 output receptacles, has hardwire input connection & offers network-grade AC surge & noise suppression. Network management interfaces include USB (Universal Serial Bus), DB9 serial with contact closure & SNMPWEBCARD slot capability. The SMX5000XLRT3U supports simultaneous detailed monitoring of equipment load levels, self-test data & mains power conditions via all network interfaces at once.

Includes:: Power Alert monitoring software & complete cabling, Emergency Power Off (EPO) interface, 3 stage metered current monitoring & battery charge LEDs. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Tripp Lite's SMART500RT1U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime & equipment damage due to power outages, voltage fluctuations & transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 17 minutes half load runtime & 5 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA / 300 watt power handling capability is compatible with networking, telecom & other sensitive electronic applications.

Includes:: a total of 6 outputs with a single pair of outlets that can be individually controlled via software interface to reboot select equipment on demand or automatically shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS & site power conditions via built-in USB (Universal Serial Bus) & DB9 monitoring ports.

Includes:: Power Alert UPS monitoring & unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS & connected equipment in the case of fire or emergency situation. Multi-function audible alarms & set of 5 front panel LEDs offer at-a-glance notification of UPS & line power status. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges & line noise. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...