About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Trend Snap/cs/8tc
Snappy Tc D/csk 7/64
Dr Snappy
£13.00
Tungsten Carbide tipped version of the popular Snappy drill countersink with adjustable HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only. D=3/8 inch. D=9.5 mm. D2=7/64 inch. D2=2.75 mm. Shank Diameter=1/4 inch hex Screw size S/W= No. 8 H/W= No. 6. ...
Available
Trend Snap/dbg/7 Centring Guide 7/64in Drill
Trend Snap/dbg/7
Centring Guide 7/64in
Drill
£11.00
These spring loaded drill bit guides are self centring & are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment, they can be easily dismantled for cleaning & are supplied with a HSS Drill Bit. Drill

Size: 2.75 mm. (7/64 in.). Screw

Size: No. 8.



...
Available
image missing
Trend Snap/hklc/6
Snap/hklc/6 Key Chuck
£16.00
Trends SNAPHKLC6 keyless chuck can be used in quick chucks & impact drivers to hold parallel shank drills bits up to 1/4 inch. This chuck has a clamping capacity 0.8 mm. (1/32 inch) to 6 mm. (1/4 inch). It has new enhanced gripping power when compared to traditional key type drill chucks for added strength & durability. The Trend chuck is lightweight, with plastic a body, & fitted with Snappy shank 1/4 inch hex shank adaptor. Keyless chuck. Enhanced gripping power. Lightweight. Plastic body. Fitted with Snappy shank 1/4-Inch hex shank adaptor. Box Contents: 1 x Snappy SNAPHKLC6 key chuck. ...
Available
Trend Snap/th2/set Snappy Set 60pc
Trend Snap/th 2/set
Snappy Set 60pc
£92.99
Heavy-duty fabric tool holder available with assorted Snappy tools. Standard Quick Chuck Masonry bits 567 and 8 mm. Drill bit guide No. 6 No 8. Drills 123456 and 7 mm. Auger bits 10 and 13 mm. Flat bits 16 19 22 25 and 30 mm. Drill countersinks 2.5 3.25 and 3.5 mm. Deburrer/countersink Hole enlarger. Square drive adapter 1/43/8 & 1/2 in. Screwdriver bit Pozi No. 123. Magnetic drivers 6 8 10 and 12 mm. A/F Snappy Pencil Insert bits. Magnetic bit holder (including 5 slotted 3 Pozi 3 Phillips 6 hex and 6 Torx). ...
Available
Trend T421/35 X 1/4 Tungsten Carbide Tipcut H/s
Trend T421/35 X 1/4
Tungsten Carbide
Tipcut H/s
£23.00
Specifically manufactured for the kitchen furniture trade for recessing circular hinges. Type 421 has two wings no scribers & centre point while the T421 also has two wings no scribers & no centre point & is best suited for thinner laminate covered boards. These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This hinge sinker is best suited for thinner laminate covered boards. Use with pillar drills only. ...
Available
image missing
Trend T4elk Router
115v
£107.50
The Trend T4EK light-duty plunge router is suitable for the hobbyist & light trade user.

Features: Variable

...
Available
image missing
Trend T5eb Router
£368.00
Electronic variable control of spindle speed under load for a fine finish on all types of material. Soft start feature eliminates sudden movement of machine on start up. Spindle lock & hex collet nut allows easy cutter changes. Precision machined one piece multi slit collet with combined nut. Compact design & low weight make it easy to use especially for intricate work. Adjustable twin rod side fence for guiding along a straight edge. Rating= Professional / Trade Plunge stroke=0 50mm Power input=850w Power ampage=3. 8amp Standard model collet dia. =1 / 4 & 8mm Cutter dia. max. =40mm No load speeds=9 27000 rpm Dust spout size=35mm Guide bush dia. =20mm Weight=3. 0kg Voltages=240v Sound pressure Lpa=81. 0 d B (A)1 Acoustic pressure Lwa=94. 01 d B (A)2 Hand arm vibration= ...
Available
image missing
Trend Temp/bh/a Butt
Hinge Template
£40.49
A routing template that allows a router to create a hinge recess on a door. Made from clear 8 mm. thick plastic.

Includes::

...
Available
image missing
Trend Temp/luc/57
Letter Template
£45.50
Hand operated winches ideal for moving & pulling loads & have many uses in DIY leisure & light commercial applications. These winches offer two working loads of 450 kg. or 900 kg. & are perfect for general recovery & loading work such as Cars Boats Lawn Equipment & pulling loads onto trailers or up steep drive-ways. The winches feature hardened steel gears with a smooth action single speed ratcheting crank locking mechanism supported on a heavy plate chassis coated for corrosion resistance. Fitted with a drop forged steel hook with safety pawl & a long 24 cm. handle for easy operation. Note: Do not exceed 180% grade when puling any Weight: load. This product is not designed for lifting. FAIAUWIN900 specifications: Maximum load: 900 kg. Cable length: 10 m. x 5.1. Maximum traction capacity: 2000da N. ...
Available
image missing
Trend Temp/otb/a
Offset Trenching Base
£29.50
Ideal for housing cuts where oversize or undersize board is used. Allows wider grooves to be routed by simply rotating the base. Made from clear plastic. Pre-drilled for Trend, Elu & De Walt routers. Can be re-drilled by user to suit other makes of router. The distance from the centre hole to the shortest edge is 100 mm., subsequent edge distances are 101 mm., 102 mm., 103 mm., 104 mm. & 105 mm. Size=200 x 200 x 8 mm. with 1.0 mm. offset. ...
Available

Trend T46/01 X 1/2 Tungsten Carbide Guided Trimmer

Self guiding cutters with bearings mounted for trimming and bevelling timber lippings and plastic laminate edges for cabinet making countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work bearings are normally fractionally larger than cutter diameter to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2 in Shank. Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90 D = 12.7 mm. C = 25 mm.
Buy
Availability: In Stock
£19.00
computer components DEFAULT
Description Reviews / Comments Add New

Product Description

Self guiding cutters with bearings mounted for trimming & bevelling timber lippings & plastic laminate edges for cabinet making countertop production or any shaping applications. Bearing guided cutters are suitable for both straight & curved work bearings are normally fractionally larger than cutter diameter to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling
- use the bearing to follow a template or base edge of board. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2 in Shank. Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90 D = 12.7 mm. C = 25 mm.

Reviews/Comments

Add New

Intelligent Comparison

Available
image missing
Trend 46/94 X 1/2 Tungsten Carbide Guided Profiler Ebuyer Business
£38.99
Available
image missing
Trend 46/390 X 1/2 Tungsten Carbide Guided Rebater Ebuyer Business
£58.00
Available
Trend 46/80 X 1/4 Tungsten Carbide 3 Flute Trimmer
Trend 46/80 X 1/4 Tungsten Carbide 3 Flute Trimmer Ebuyer Business
£23.00
Available
image missing
Trend 46/92 X 1/4 Tungsten Carbide Guided Profiler Ebuyer Business
£26.50
Available
Trend 4/30 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/30 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer Business
£36.50
Available
Trend 4/80 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/80 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer Business
£37.00
Available
Trend 4/24 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/24 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer Business
£37.49
Available
Trend 4/29 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/29 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer Business
£26.99

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
Plastic - A generic term for a synthetic product used in the manufacture of products
Dry - A term used to describe an item with has little or no water present
Dry - A term used in wine making to describe the lack of sugar (sweetness)
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
Bearings - A direction or a way someone moves around.

Supplier Information

Ebuyer Business
Get ready to power up your tech game with Ebuyer (https://www.ebuyer.com/)! Explore a vast selection of the latest gadgets, electronics, and computing essentials at unbeatable prices. From cutting-edge laptops and gaming PCs to home appliances and office supplies, we've got everything you need to stay connected and productive. With fast delivery and top-notch customer service, Ebuyer is your go-to destination for all things tech. Don't settle for less – shop now and take your tech game to the next level with Ebuyer!
Page Updated: 2024-02-28 09:26:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu