About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Trend C019 Router Cutter 1/4 Shank Tc
Trend C019 Router
Cutter 1/4 Shank Tc
£12.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=15/32 inch. D=12 mm. Cut length=3/4 inch. Cut length=19.1 mm. Shank Diameter=1/4 inch. ...
Available
image missing
Trend C024ax 1/4tc
Straight Cutter 1/4
Tct
£20.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=19/32 inch. D=15 mm. Cut length=63/64 inch. Cut length=25 mm. Shank Diameter=1/4 inch. ...
Available
Trend C041 Router Cutter 1/4 Shank Tc
Trend C041 Router
Cutter 1/4 Shank Tc
£11.99
These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table shows angles from the horizontal & the profiles show angles from the vertical. D=1/2 inch. D=12.7 mm. Cut length=1/2 inch. Cut length=12.7 mm. Overall length=46 mm. A=104 degrees. Shank Diameter=1/4 inch. ...
Available
image missing
Trend C049 X 1/4
Tungsten Carbide Self
Guided Chamfer
£19.49
Chamfer, V Groove Cutters These types of cutter are used for edging & chamfer cutting on man-made fibre boards natural timbers & plastics. Tools are offered to produce various angles for engraving chamfering & V grooving. Ball bearing & pin guided cutters enable curved work to be undertaken bearings running along the board edge or a template. Typical trade applications include sign making freehand engraving cabinet making & decorative joinery. A range of valuable self-guiding chamfer/bevel cutters. Bearing follows the board beneath. T.C.T. Shank. = 1/4 in. C = 12.7 mm. B = 9.5 mm. Angel = 45. ...
Available
Trend C058 Router Cutter 1/4 Shank Tc
Trend C058 Router
Cutter 1/4 Shank Tc
£20.50
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes & board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig. D=1 inch. D=25.4 mm. Cut length=5/8 inch. Cut length=15.9 mm. Overall length=56.5 mm. R=12.7 mm. Shank Diameter=1/4 inch. ...
Available
image missing
Trend C145 X 1/4
Tungsten Carbide
Slotting Cutter 6.3mm
£17.99
This two wing slotting cutter is ideal for grooving & rebating operations. A 1/2 in diameter bearing is supplied with every cutter. Depth of cut can be changed by purchasing alternative bearing sizes. T.C.T. Shank = 1/4 in. C = 6.3 mm. (Slots) Depth with standard cutter = 3/8 in. ...
Available
Trend C152 X 1/2 Tungsten Carbide Biscuit Joiner Set
Trend C152 X 1/2
Tungsten Carbide
Biscuit Joiner Set
£26.50
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Supplied with instructions. No. 0
- 45 mm. x 15 mm. x 4 mm. Suitable for 8-12 mm. boards Use bearing B19A 9.05 mm. depth. No. 10
- 53 mm. x 19 mm. x 4 mm. Suitable for 13-18 mm. boards Use bearing B16A 10.6 mm. depth. No. 20
- 58 mm. x 23 mm. x 4 mm. Suitable for 19 mm. +- board Use bearing B127AD1 37.2 mm. Cut length 4 mm. B 12.7 mm. B2 16.0 mm. B3 19.0 mm. Shank = 1/2 in.


...
Available
image missing
Trend C152 X 1/4
Tungsten Carbide
Biscuit Jointer Set
£26.50
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Supplied with instructions. No. 0
- 45 mm. x 15 mm. x 4 mm. Suitable for 8-12 mm. boards Use bearing B19A 9.05 mm. depth. No. 10
- 53 mm. x 19 mm. x 4 mm. Suitable for 13-18 mm. boards Use bearing B16A 10.6 mm. depth. No. 20
- 58 mm. x 23 mm. x 4 mm. Suitable for 19 mm. +- board Use bearing B127AD1 37.2 mm. Cut length 4 mm. B 12.7 mm. B2 16.0 mm. B3 19.0 mm. Shank = 1/4 in.


...
Available
Trend C172x1/2tc Straight Cutter 1/2 Tct
Trend C172x 1/2tc
Straight Cutter 1/2
Tct
£17.99
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=15/32 inch. D=12 mm. Cut length=2 1/2 inches. Cut length=63 mm. Shank Diameter=1/2 inch. ...
Available
Trend C193x1/2tc Router Cutter 1/2 Tc
Trend C193x 1/2tc
Router Cutter 1/2 Tc
£23.99
These cutters are self-guiding & can be used to produce rebates, lap joints, tongues & rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. D=31.8 mm. Cut length=15.9 =12.7 &9.5 mm. E=9.5 mm. E2=11.1 mm. Shank Diameter=1/2 inch. ...
Available

Trend C079 Router Cutter 1/4 Shank Tc

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D=38.0 mm. Cut length=3/4 inch. Cut length=19.1 mm. B=9.5 mm. B2=12.7 mm. R=1/2 inch. R=12.7 mm. Shank Diameter=1/4 inch.
Buy
Availability: In Stock
£28.00
computer components DEFAULT
Description Reviews / Comments Add New

Product Description

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D=38.0 mm. Cut length=3/4 inch. Cut length=19.1 mm. B=9.5 mm. B2=12.7 mm. R=1/2 inch. R=12.7 mm. Shank Diameter=1/4 inch.

Reviews/Comments

Add New

Intelligent Comparison

Available
Trend C019 Router Cutter 1/4 Shank Tc
Trend C019 Router Cutter 1/4 Shank Tc Ebuyer Business
£12.50
Available
Trend C058 Router Cutter 1/4 Shank Tc
Trend C058 Router Cutter 1/4 Shank Tc Ebuyer Business
£20.50
Available
Trend C041 Router Cutter 1/4 Shank Tc
Trend C041 Router Cutter 1/4 Shank Tc Ebuyer Business
£11.99
Available
image missing
Trend Co11 Router Cutter 1/4 Shank Tc Ebuyer Business
£9.50
Available
Trend 3/2 Router Cutter 1/4 Tc
Trend 3/2 Router Cutter 1/4 Tc Ebuyer Business
£19.00
Available
Trend C012bx1/4tc Router Cutter 1/4 Tc
Trend C012bx1/4tc Router Cutter 1/4 Tc Ebuyer Business
£10.00
Available
image missing
Trend 2 10 Router Cutter 1 4 Tc Ebuyer Business
£17.99
Available
Trend C193x1/2tc Router Cutter 1/2 Tc
Trend C193x1/2tc Router Cutter 1/2 Tc Ebuyer Business
£23.99

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
Inch - Equivalent to approximately 2.5cm
Bearings - A direction or a way someone moves around.

Supplier Information

Ebuyer Business
Get ready to power up your tech game with Ebuyer (https://www.ebuyer.com/)! Explore a vast selection of the latest gadgets, electronics, and computing essentials at unbeatable prices. From cutting-edge laptops and gaming PCs to home appliances and office supplies, we've got everything you need to stay connected and productive. With fast delivery and top-notch customer service, Ebuyer is your go-to destination for all things tech. Don't settle for less – shop now and take your tech game to the next level with Ebuyer!
Page Updated: 2024-02-28 09:26:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu