Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 1/4 in. 6.3 mm. C
- Cutting Length
- 3/4 in. 19.1 mm. T.C.T. 2 Flutes.



...

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=23/64 inch. D=9 mm. Cut length=3/4 inch. Cut length=19 mm. Shank Diameter=1/4 inch. ...

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter:
- 3/8 in. 9.5 mm. C
- Cutting Length
- 1 1/4 in. 31.8 mm. T.C.T. 2 Flutes.



...

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D1 3/8 inch. D1 9.5 mm. Cut length 1 inch Cut length 25.4 mm. Shank Diameter 1/4 inch. ...

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 10 mm. C
- Cutting Length
- 19.1 mm. T.C.T.



...

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=19/32 inch. D=15 mm. Cut length=63/64 inch. Cut length=25 mm. Shank Diameter=1/4 inch. ...

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table shows angles from the horizontal & the profiles show angles from the vertical. D=1/2 inch. D=12.7 mm. Cut length=1/2 inch. Cut length=12.7 mm. Overall length=46 mm. A=104 degrees. Shank Diameter=1/4 inch. ...

Chamfer, V Groove Cutters These types of cutter are used for edging & chamfer cutting on man-made fibre boards natural timbers & plastics. Tools are offered to produce various angles for engraving chamfering & V grooving. Ball bearing & pin guided cutters enable curved work to be undertaken bearings running along the board edge or a template. Typical trade applications include sign making freehand engraving cabinet making & decorative joinery. A range of valuable self-guiding chamfer/bevel cutters. Bearing follows the board beneath. T.C.T. Shank. = 1/4 in. C = 12.7 mm. B = 9.5 mm. Angel = 45. ...

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes & board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig. D=1 inch. D=25.4 mm. Cut length=5/8 inch. Cut length=15.9 mm. Overall length=56.5 mm. R=12.7 mm. Shank Diameter=1/4 inch. ...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D=38.0 mm. Cut length=3/4 inch. Cut length=19.1 mm. B=9.5 mm. B2=12.7 mm. R=1/2 inch. R=12.7 mm. Shank Diameter=1/4 inch. ...