In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features: ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...

In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features: ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...

In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features: ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...

In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features: ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...

The Drakonia is a laser mouse with eleven buttons & a 4-way scroll wheel. All keys are freely programmable through the included configuration software. Under the glossy surface of the dragon scale print, operates an Avago 9500 laser sensor which supports up to 5, 000 DPI. An LED indicator constantly shows the current DPI setting in use. Within the base compartment of the laser mouse you will find a Weight Tuning System allowing adjustment to the overall weight. The Drakonia is an ergonomic mouse that focuses on stability & control. Its flared base gives you: (A) more control for very small & fine movements; & (B) better comfort for extended gameplay sessions. As a result, the kind of gamers that would appreciate the Drakonia typically include FPS snipers & RTS/RPG players; those who would normally be in it for the long haul. For the latter, having as many buttons as possible is always better. Therefore, the Drakonia provides 11 programmable buttons plus a scroll wheel for those gamers who know that you dont have to always do it faster in order to do it better.

Features: Avago 9500 Laser sensor 11 programmable buttons+4-way scroll wheel LEDs for DPI indication Internal memory for user profiles Gold-plated USB (Universal Serial Bus) connector Cable with textile sheathing Weight Tuning System Ergonomic design Rubberized surface for maximum grip Configuration software included Supported operating systems: Windows XP/ Vista/7 (32 & 64 bit)

...

Save on space
- not on possibilities! The black MA-A1000 is a compact m ATX PC case in Alu-Optic. Despite it being compact, the
...

Save on space
- not on possibilities! The black MA-I1000 is a compact m ATX PC case in Alu-Optic. Despite it being compact, the
...

Save on space
- not on possibilities! The black MA-M1000 is a compact m ATX PC case in Alu-Optic. Despite it being compact, the
...

Simple elegance combined with maximum functionality The Mask is a spacious ATX case in a reduced & timeless design. The bezel has an aluminium-optic finish, while the door in the front ensures independent installation of hard drives for an always discreet look. Generous space available With a generous width of 210 mm, smooth installation of tower coolers with a height of up 170 mm is possible. The Mask case offers, in addition, a variety of possibilities for the installation & inconspicuous wiring of all components. Extra-long graphics cards up to a maximum of 41.5 cm can be installed due to the modular hard drive management. Even at maximum capacity with 2.5" hard drives/SSDs, the Mask still provides sufficient room for VGA cards up to 32.5 cm in length. Fan Configuration Behind the discreetly designed air intakes in the front, there are two preinstalled 120 mm low noise fans & an additional 120 mm fan on the back. Thus, the Mask is well prepared for the cooling of high-performance components. Front ports Two USB (Universal Serial Bus) 3.0 ports, two audio ports as well as two USB (Universal Serial Bus) 2.0 ports are quickly accessible & discreetly hidden behind two flaps on the top of the front panel. In the event that the motherboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 interfaces can also be optionally connected & operated in USB (Universal Serial Bus) 2.0 mode. Installation options for drives The case features two 5.25" drive bays for the screwless installation of optical drives. For the installation of card readers or other devices in a 3.5" format, a slot is available. Up to three 3.5" hard drives as well as four 2.5" hard drives/SSDs can be mounted without screws with the enclosed rails in the rack system. in addition, if required, another 2.5" SSD/hard drive can be fastened to the case floor.

Features: ATX case 2x 5.25" drive bays (external) 1x 3.5" drive bay (external) 4x 2, 5" drive bays for hard drives/SSDs (rack-mounted system) in modular design 3x 3.5" hard drive bays (rack-mounted system) 1x 2.5" installation option for hard drives/SSDs (rack-mounted system) Installation rails for hard drives/SSDs (3x 3.5", 4x 2.5") included Top I/O: 2x USB (Universal Serial Bus) 3.0 (internal 19-pin mainboard connector incl. USB2.0 plug), 2x USB (Universal Serial Bus) 2.0, 2x Audio Quick fasteners for ODDs 2 openings for water coolers Cable management system Dimensions: 490 x 210 x 450 mm (L x W x H) Weight: ~6.0kg Fan configuration: Case front 2x 120 mm fan (preinstalled) Backside 1x 120 mm fan (preinstalled) Compatibility: Max. Length, graphics cards 32.5/41.5 cm (when removing middle hard drive cage) Max. Height, CPU cooler 17.0 cm Max. Length, power supply 30 cm

...

Duck, roll, pull out a weapon, shoot “ in combat there are always moments when you have to press multiple keys simultaneously. The Skiller offers you an 18 key Rollover Function “ so no command remains in the distance. Youre fighting on different fronts & always need a personalized combat environment. The Skiller can be individually configured with the included software: Every single key can be assigned functions, shortcuts, or entire command sets “ for every game, every mission, & every other program. Strap yourself into the battle! Trust in the precision & function variety of your Skiller keyboard. Features (keyboard): ¢3-block standard gaming keyboard ¢20 additional multimedia keys ¢8 swappable gaming keys ¢ Additional customization software ¢ Supported operating systems: Windows XP/ Vista/7/8 (32 & 64 bit) Connection USB (Universal Serial Bus) Cable length 150 cm Number of keys 104+20 multimedia keys Multi-Key Rollover Max. 18 keys

Dimensions (Lx Wx H) 485x 212x 25 mm Weight 764 g Specifications (keyboard): Input power (DC) 5 V Operating life cycles of keys 10 million key presses Operating temperature 0°C ~ +50°C Storage temperature -22°C ~ +65°C Features (software): ¢ Special customization software for games & other applications (e.g. Photoshop, Windows, browser etc.) ¢18-Key Rollover support ¢ Fully programmable keys ¢ Supports 10 different profiles with 3 layers each ¢ Programmable keys can record: macros, macro loops, media functions, internet functions, keystrokes, mouse functions, delay time etc.

...