More From Contributor

£8.50
Shampoo your hair without water or rinsing. The alcohol free shampoo leaves hair fresh, clean & odour free, whilst the conditioner eliminates tangled hair, leaving it soft, silky & easy to manage. Easier still, choose a shampoo cap which contains sham ...
Available
£50.09
In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features:
ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...
Available
£50.09
In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features:
ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...
Available
£47.98
In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features:
ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...
Available
£50.09
In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features:
ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...
Available
£14.98
Fire Glider Optical Some things just simply cannot be enhanced upon. Some things have simply proven their mettle time & time again over the course of the last decade. This is why we've now outfitted our Fire Glider with an optical sensor
- proven technology to assist in your triumphs: The Fire Glider Optical provides an optical sensor supporting up to 3, 000 DPI & 3, 600 FPS. The ergonomically shaped body of this gaming mouse, with its reduced flame design, fits comfortably in the hand with the thumb pad providing a solid grip in even the most hectic gaming situations. With the Weight-Tuning-System situated in the bottom of the mouse, up to 19.5 grams can be added to maximize personal comfort & performance in 7 different configurations. Five of the seven buttons are fully programmable for various functions through the included software. These programming options enable easier day-to-day operations as well as improving performance in gaming applications. In addition, through the software, users can save individual macros to the onboard memory. Via the DPI selector, the resolution can be adjusted in five levels from 400 to a maximum of 3, 000 DPI. The selected DPI level is represented by various color combinations on the mouse. The Fire Glider Optical weighs up to 135 g, has a 1.8 m long cable & connects to computers via USB (Universal Serial Bus). Procure the best advantage possible with the SHARKOON Fire Glider Optical!

Features:
Optical sensor 7 buttons, 5 of them freely programmable DPI switch with color display (5 steps) Weight tuning system (max. 19.5 g) On-board memory for macros Smooth running & finely adjustable scroll wheel Ergonomic design for convenient handling Special grip areas offering maximum hold Supported operating systems: Windows XP, Vista, 7/8 (32-/64-bit) Specifications: Max. DPI 3, 000 DPI/CPI stepping 400-800-1200-1600-3000 Max. acceleration 30 G Mouse weight max. 135 g (w/o cable)

Dimensions (L x W x H) 130 x 65 x 45 mm Sensor Optical Connector USB (Universal Serial Bus) (gold-plated) Cable length 180 cm (textile sheathing) Max. FPS 3, 600 Button reaction time 3 ms (left button), rest 16 ms Polling rate Max. 1000 Hz (1 ms) Onboard memory Yes Number of buttons 7 DPI indication Yes (LED) Mouse slide pads 5, plastic Chip Pix Art PAW3305 Lifting sensitivity 3 mm Weight Tuning System Yes, max. 19.5 g Package contents: Fire Glider Optical CD with software & manual (as PDF) Additional mouse skates Transport bag




...
Available
£26.91
Save on space
- not on possibilities! The black MA-A1000 is a compact m ATX PC case in Alu-Optic. Despite it being compact, the
...
Available
£29.67
Save on space
- not on possibilities! The black MA-I1000 is a compact m ATX PC case in Alu-Optic. Despite it being compact, the
...
Available
£32.23
Save on space
- not on possibilities! The black MA-M1000 is a compact m ATX PC case in Alu-Optic. Despite it being compact, the
...
Available
£50.09
Simple elegance combined with maximum functionality The Mask is a spacious ATX case in a reduced & timeless design. The bezel has an aluminium-optic finish, while the door in the front ensures independent installation of hard drives for an always discreet look. Generous space available With a generous width of 210 mm, smooth installation of tower coolers with a height of up 170 mm is possible. The Mask case offers, in addition, a variety of possibilities for the installation & inconspicuous wiring of all components. Extra-long graphics cards up to a maximum of 41.5 cm can be installed due to the modular hard drive management. Even at maximum capacity with 2.5" hard drives/SSDs, the Mask still provides sufficient room for VGA cards up to 32.5 cm in length. Fan Configuration Behind the discreetly designed air intakes in the front, there are two preinstalled 120 mm low noise fans & an additional 120 mm fan on the back. Thus, the Mask is well prepared for the cooling of high-performance components. Front ports Two USB (Universal Serial Bus) 3.0 ports, two audio ports as well as two USB (Universal Serial Bus) 2.0 ports are quickly accessible & discreetly hidden behind two flaps on the top of the front panel. In the event that the motherboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 interfaces can also be optionally connected & operated in USB (Universal Serial Bus) 2.0 mode. Installation options for drives The case features two 5.25" drive bays for the screwless installation of optical drives. For the installation of card readers or other devices in a 3.5" format, a slot is available. Up to three 3.5" hard drives as well as four 2.5" hard drives/SSDs can be mounted without screws with the enclosed rails in the rack system. in addition, if required, another 2.5" SSD/hard drive can be fastened to the case floor.

Features:
ATX case 2x 5.25" drive bays (external) 1x 3.5" drive bay (external) 4x 2, 5" drive bays for hard drives/SSDs (rack-mounted system) in modular design 3x 3.5" hard drive bays (rack-mounted system) 1x 2.5" installation option for hard drives/SSDs (rack-mounted system) Installation rails for hard drives/SSDs (3x 3.5", 4x 2.5") included Top I/O: 2x USB (Universal Serial Bus) 3.0 (internal 19-pin mainboard connector incl. USB2.0 plug), 2x USB (Universal Serial Bus) 2.0, 2x Audio Quick fasteners for ODDs 2 openings for water coolers Cable management system Dimensions: 490 x 210 x 450 mm (L x W x H) Weight: ~6.0kg Fan configuration: Case front 2x 120 mm fan (preinstalled) Backside 1x 120 mm fan (preinstalled) Compatibility: Max. Length, graphics cards 32.5/41.5 cm (when removing middle hard drive cage) Max. Height, CPU cooler 17.0 cm Max. Length, power supply 30 cm

...
Available

Sharkoon Drakonia Mouse LAS U

The Drakonia is a laser mouse with eleven buttons and a 4-way scroll wheel. All keys are freely programmable through the included configuration software. Under the glossy surface of the dragon scale print, operates an Avago 9500 laser sensor which supports up to 5, 000 DPI. An LED indicator constantly shows the current DPI setting in use. Within the base compartment of the laser mouse you will find a Weight Tuning System allowing adjustment to the overall weight. The Drakonia is an ergonomic mouse that focuses on stability and control. Its flared base gives you: (A) more control for very small and fine movements; and (B) better comfort for extended gameplay sessions. As a result, the kind of gamers that would appreciate the Drakonia typically include FPS snipers and RTS/RPG players;
those who would normally be in it for the long haul. For the latter, having as many buttons as possible is always better. Therefore, the Drakonia provides 11 programmable buttons plus a scroll wheel for those gamers who know that you dont have to always do it faster in order to do it better. Features: Avago 9500 Laser sensor 11 programmable buttons+4-way scroll wheel LEDs for DPI indication Internal memory for user profiles Gold-plated USB connector Cable with textile sheathing Weight Tuning System Ergonomic design Rubberized surface for maximum grip Configuration software included Supported operating systems: Windows XP/Vista/7 (32 and 64 bit)
Availability: In Stock
£22.98

Product Description

The Drakonia is a laser mouse with eleven buttons & a 4-way scroll wheel. All keys are freely programmable through the included configuration software. Under the glossy surface of the dragon scale print, operates an Avago 9500 laser sensor which supports up to 5, 000 DPI. An LED indicator constantly shows the current DPI setting in use. Within the base compartment of the laser mouse you will find a Weight Tuning System allowing adjustment to the overall weight. The Drakonia is an ergonomic mouse that focuses on stability & control. Its flared base gives you: (A) more control for very small & fine movements; & (B) better comfort for extended gameplay sessions. As a result, the kind of gamers that would appreciate the Drakonia typically include FPS snipers & RTS/RPG players; those who would normally be in it for the long haul. For the latter, having as many buttons as possible is always better. Therefore, the Drakonia provides 11 programmable buttons plus a scroll wheel for those gamers who know that you dont have to always do it faster in order to do it better.

Features:
Avago 9500 Laser sensor 11 programmable buttons+4-way scroll wheel LEDs for DPI indication Internal memory for user profiles Gold-plated USB (Universal Serial Bus) connector Cable with textile sheathing Weight Tuning System Ergonomic design Rubberized surface for maximum grip Configuration software included Supported operating systems: Windows XP/ Vista/7 (32 & 64 bit)

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

USB - Universal Serial Bus
LED - Light Emitting Diode - a small light source
Gold - A precious highly conductive metal
Ergonomic - A specific design to fit the purpose of the user
Vista - A computer operating system from microsoft released in 2006
Windows XP - A computer operating system from microsoft released in 2001
DPI - Dots per inch. A measurement of the amount of detail in a picture/print
Cable - A series of wires bonded to form a single thread
Gold-Plated - A thin layer of gold coats the surface to give corrosion resistence.
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon
USB - Universal Serial Bus. A method of connecting a device to a computer
Comfort - something that feels nice to the user. Often relaxing.
Small - something that takes up less space than normal.
LED - Light Emitting Diode. A bulb that is very efficient at producing light. Often small.
Gold - A colour, a type of rich metal. Chemical symbol AU.
Design - A drawing or styles that shows the look and functionality of something before its made.
Memory - A way to describe the way in which the brain can remember things.
Glossy - Something that is smooth and shiny in appearance.
Print - A mechanical process of putting text onto paper. It can also relate to a pattern on an item.

Supplier Information

Ebuyer Business
Get ready to power up your tech game with Ebuyer (https://www.ebuyer.com/)! Explore a vast selection of the latest gadgets, electronics, and computing essentials at unbeatable prices. From cutting-edge laptops and gaming PCs to home appliances and office supplies, we've got everything you need to stay connected and productive. With fast delivery and top-notch customer service, Ebuyer is your go-to destination for all things tech. Don't settle for less – shop now and take your tech game to the next level with Ebuyer!
Page Updated: 2024-02-28 09:26:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu