Hyper X HX424C15FB/8 is a 1G x 64-bit (8GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 2 Rx 8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. Specifications:
- CL (IDD) 15 cycles
- Row Cycle Time (t R Cmin) 46.75ns (min.)
- Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.)
- Row Active Time (t RASmin) 29.125ns (min.)
- UL Rating 94 V
- 0
- Operating Temperature 0 oC to +85 o C
- Storage Temperature -55 oC to +100 oC

Features:
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP
- 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal & dynamic on-die termination (ODT) for data, strobe, & mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation & calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 & burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command & address bus
- Height 1.340” (34.04mm), w/heat sink


























...

Hyper X HX426C15FB/8 is a 1G x 64-bit (8GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 2 Rx 8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V. Specifications:
- CL (IDD) 15 cycles
- Row Cycle Time (t R Cmin) 45ns (min.)
- Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.)
- Row Active Time (t RASmin) 26.25ns (min.)
- UL Rating 94 V
- 0
- Operating Temperature 0 oC to +85 o C
- Storage Temperature -55 oC to +100 oC

Features:
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP
- 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal & dynamic on-die termination (ODT) for data, strobe, & mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation & calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 & burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command & address bus
- Height 1.340” (34.04mm), w/heatsink


























...

Let your opponents take the blows while you game without pain. Hyper X Cloud cradles your head in a super-soft padded headb&, memory foam ear cushions & leatherette-padded cups so even your late game will be comfortable. It's affordable, so there's no pain in the price either. Pro-gaming optimized, Hyper X Cloud is Hi-Fi capable & delivers intense audio with crystal-clear low, mid & high tones plus enhanced bass-reproduction so you can lose yourself while you win. ...

. rpd-row { overflow:hidden; padding:30px 0; border-bottom: 1px solid eee; }. rpd-row img { max-
Width:100%; }. rpd-left
...

. rpd-row { overflow:hidden; padding:30px 0; border-bottom: 1px solid eee; }. rpd-row img { max-
Width:100%; }. rpd-left
...

. rpd-row { overflow:hidden; padding:30px 0; border-bottom: 1px solid eee; }. rpd-row img { max-
Width:100%; }. rpd-left
...

Automatic overclocking for X99 platforms. Hyper X FURY DDR4 can handle even the toughest battle. It automatically recognizes its host platform & overclocks to the highest frequency published (up to 2666 M Hz) FURY DDR4 runs at 1.2V, even at 2666 M Hz, so it stays cooler while you play. You don’t need to alter the voltage to reach higher speeds, which means there’s more power for other hardware in the system. FURY’s sleek, asymmetrical black heat spreader provides enhanced thermal dissipation to help keep your cool & help you stand out from the crowd. It complements Intel’s 6- or 8-core processors for faster video editing, 3D rendering, gaming & AI processing. FURY is affordable & available in kits with capacities up to 64GB in black
- Automatic overclocking — up to 2666 M Hz
- Low power consumption at 1.2V
- Optimized for Intel’s X99 chipset
- Stylish low profile heat spreader in black FEATURES/BENEFITS Easy to install — plug-&-play functionality Automatic overclocking — reach faster speeds & higher capacities just by installing the memory, no adjustments in BIOS needed Cost-efficient — the perfect combination of price & DDR4 performance Unique — asymmetrical, signature FURY heat spreader Design — low profile, black heat spreader color & matching PCB Reliable — 100% factory tested Compatible — tested with all popular brands of motherboards SPECIFICATIONS Capacities
- 8GB, 16GB, 32GB & 64GB kits Frequency Speed
- 2133 M Hz, 2400 M Hz, 2666 M Hz CAS Latency
- CL14-CL15 Voltage — 1.2V Operating Temperature
- 0°C to 85°C Storage Temperature: -55°C to 100°C

Dimensions
- 133.35mm x 34.24mm Compatible with Intel X99 chipset










...

Automatic overclocking for X99 platforms. Hyper X FURY DDR4 can handle even the toughest battle. It automatically recognizes its host platform & overclocks to the highest frequency published (up to 2666 M Hz) FURY DDR4 runs at 1.2V, even at 2666 M Hz, so it stays cooler while you play. You don’t need to alter the voltage to reach higher speeds, which means there’s more power for other hardware in the system. FURY’s sleek, asymmetrical black heat spreader provides enhanced thermal dissipation to help keep your cool & help you stand out from the crowd. It complements Intel’s 6- or 8-core processors for faster video editing, 3D rendering, gaming & AI processing. FURY is affordable & available in kits with capacities up to 64GB in black
- Automatic overclocking — up to 2666 M Hz
- Low power consumption at 1.2V
- Optimized for Intel’s X99 chipset
- Stylish low profile heat spreader in black FEATURES/BENEFITS Easy to install — plug-&-play functionality Automatic overclocking — reach faster speeds & higher capacities just by installing the memory, no adjustments in BIOS needed Cost-efficient — the perfect combination of price & DDR4 performance Unique — asymmetrical, signature FURY heat spreader Design — low profile, black heat spreader color & matching PCB Reliable — 100% factory tested Compatible — tested with all popular brands of motherboards SPECIFICATIONS Capacities
- 8GB, 16GB, 32GB & 64GB kits Frequency Speed
- 2133 M Hz, 2400 M Hz, 2666 M Hz CAS Latency
- CL14-CL15 Voltage — 1.2V Operating Temperature
- 0°C to 85°C Storage Temperature: -55°C to 100°C

Dimensions
- 133.35mm x 34.24mm Compatible with Intel X99 chipset










...

Automatic overclocking for X99 platforms. Hyper X FURY DDR4 can handle even the toughest battle. It automatically recognizes its host platform & overclocks to the highest frequency published (up to 2666 M Hz) FURY DDR4 runs at 1.2V, even at 2666 M Hz, so it stays cooler while you play. You don’t need to alter the voltage to reach higher speeds, which means there’s more power for other hardware in the system. FURY’s sleek, asymmetrical black heat spreader provides enhanced thermal dissipation to help keep your cool & help you stand out from the crowd. It complements Intel’s 6- or 8-core processors for faster video editing, 3D rendering, gaming & AI processing. FURY is affordable & available in kits with capacities up to 64GB in black
- Automatic overclocking — up to 2666 M Hz
- Low power consumption at 1.2V
- Optimized for Intel’s X99 chipset
- Stylish low profile heat spreader in black FEATURES/BENEFITS Easy to install — plug-&-play functionality Automatic overclocking — reach faster speeds & higher capacities just by installing the memory, no adjustments in BIOS needed Cost-efficient — the perfect combination of price & DDR4 performance Unique — asymmetrical, signature FURY heat spreader Design — low profile, black heat spreader color & matching PCB Reliable — 100% factory tested Compatible — tested with all popular brands of motherboards SPECIFICATIONS Capacities
- 8GB, 16GB, 32GB & 64GB kits Frequency Speed
- 2133 M Hz, 2400 M Hz, 2666 M Hz CAS Latency
- CL14-CL15 Voltage — 1.2V Operating Temperature
- 0°C to 85°C Storage Temperature: -55°C to 100°C

Dimensions
- 133.35mm x 34.24mm Compatible with Intel X99 chipset










...

Automatic overclocking for X99 platforms. Hyper X FURY DDR4 can handle even the toughest battle. It automatically recognizes its host platform & overclocks to the highest frequency published (up to 2666 M Hz) FURY DDR4 runs at 1.2V, even at 2666 M Hz, so it stays cooler while you play. You don’t need to alter the voltage to reach higher speeds, which means there’s more power for other hardware in the system. FURY’s sleek, asymmetrical black heat spreader provides enhanced thermal dissipation to help keep your cool & help you stand out from the crowd. It complements Intel’s 6- or 8-core processors for faster video editing, 3D rendering, gaming & AI processing. FURY is affordable & available in kits with capacities up to 64GB in black
- Automatic overclocking — up to 2666 M Hz
- Low power consumption at 1.2V
- Optimized for Intel’s X99 chipset
- Stylish low profile heat spreader in black FEATURES/BENEFITS Easy to install — plug-&-play functionality Automatic overclocking — reach faster speeds & higher capacities just by installing the memory, no adjustments in BIOS needed Cost-efficient — the perfect combination of price & DDR4 performance Unique — asymmetrical, signature FURY heat spreader Design — low profile, black heat spreader color & matching PCB Reliable — 100% factory tested Compatible — tested with all popular brands of motherboards SPECIFICATIONS Capacities
- 8GB, 16GB, 32GB & 64GB kits Frequency Speed
- 2133 M Hz, 2400 M Hz, 2666 M Hz CAS Latency
- CL14-CL15 Voltage — 1.2V Operating Temperature
- 0°C to 85°C Storage Temperature: -55°C to 100°C

Dimensions
- 133.35mm x 34.24mm Compatible with Intel X99 chipset










...