The 1100-W power supply module is an auto ranging unit that supports input voltages between 115 & 240 VAC. Each AC power supply module has a power cord for connection to an AC power outlet. The 1100-W & 715-W modules use a 16-AWG cord (only North America). All other modules use an 18-AWG cord. The DC power supply module must be wired to a DC power source. ...

Dramatically faster than a hard drive, the Crucial M500 SSD isn’t just a storage upgrade – it’s a complete system transformation. Transform your system’s performance. Dramatically faster than a hard drive, the Crucial M500 SSD isn’t just a storage upgrade – it’s a complete system transformation. Designed to keep your system up to speed with today’s multitasking demands that often require instant & simultaneous connections with friends, apps, websites, downloads, & playlists, the Crucial M500 delivers nearly instantaneous boot times, powerful data transfer speeds, increased multitasking capability, & rock-solid reliability – all at an affordable price. Available in capacities up to terabyte-class, the Crucial M500 has passed hundreds of SSD quality tests & over a thousand hours of prerelease validation testing. Don’t settle for anything less. Features Transformative performance: dramatically faster than a hard drive Nearly instantaneous boot times Ample storage: available in capacities up to terabyte-class Extensive quality & reliability testing built into every drive Three-year limited manufacturer warranty Compatible with PC & Mac systems Transform your system’s performance. New interfaces & multitasking demands require more from your system than perhaps ever before. From connecting instantly with friends & accessing apps, websites, & playlists online, to simultaneously streaming videos & downloading files, your computer is faced with an entirely new set of performance expectations that a hard drive struggles to meet. That’s where the Crucial M500 SSD comes in. With speeds dramatically faster than a hard drive, the Crucial M500 SSD isn't just a storage upgrade
- it's a complete system transformation. From its nearly instantaneous boot times, powerful data transfer speeds, increased multitasking capability, & rock-solid reliability, the Crucial M500 delivers dramatic performance gains
- all at an affordable price. Ample storage capacity with plenty of choice. Available in capacities up to terabyte-class, the Crucial M500 SSD provides plenty of storage for your ever-growing collection of photos, videos, music, & important documents. Based on your storage needs, choose between a 120GB, 240GB, 480GB, or 960GB† drive & access your programs & files almost as soon as you click on them. If you prefer to store your data on an external backup drive, in the cloud, or on your home network, opt for a smaller capacity. Or if you’d rather have everything in one place, choose one of our larger sizes. Whichever capacity you choose, our selection ensures that you’re able to find a drive that’s the right combination of storage, performance, & price. Consistently fast speeds. No exceptions. No matter what kind of files you’re working with on a Crucial SSD, you’ll experience high speeds with no drop in performance across different file types. Unlike other SSDs on the market, Crucial SSDs treat all files the same, regardless of whether they’re compressed or uncompressed. While many SSDs on the market achieve faster speeds by using file compression, many of the most common file types can’t be compressed, resulting in SSDs that often deliver slower speeds than advertised. This is important because the files most people use every day – videos, mp 3s, advanced graphic files & zip files
- are compressed files & thus unable to be compressed any further. With a Crucial SSD, the specs we advertise are the same specs you’ll see in the real world. Crucial SSDs. Performance you can trust. As a brand of Micron, one of the largest NAND manufacturers in the world, Crucial SSDs are designed & developed in-house. This means four things: hundreds of SSD qualification tests, over a thousand hours of prerelease validation testing, 1.5 billion dollars invested in R&D, & more than 30 years of industry expertise. With our multi-billion dollar commitment to NAND development, our record of patent & process innovation, & our award-winning customer support team, we’re dedicated to quality. For you, that means your SSD has been designed with cutting-edge technology & it’s been rigorously tested & approved. Don’t settle for anything less.

Specification Capacity: 240GB Sequential Read: 500 MB/s Sequential Write: 400 MB/s 4KB Random Read: 80, 000 IOPS Memory Type: Micron MLC NAND Flash memory Controller: Marvell 88SS9187 with Micron Custom Firmware Form Factor: m SATA

Height: 3.75mm Interface: SATA 6 Gbps (SATA III) MTBF: 1.2 million hours Endurance: 72TB Total Bytes Written (TBW), equal to 40GB per day for 5 years Operating Temperature; 0°C to 70°C Compliance: CE, FCC, BSMI, C-Tick, VCCI, Kcc, Ro HS, China Ro HS, WEEE, TUV, UL, SATA-IO, IC






...

Silent PSU with Temperature Control Fan ATX 12V Compliant for all kinds of CPU & mainboard MTBF 50, 000 Hours @ 25 degrees C 2 x SATA Connectors 4 x 4-Pin Molex Connectors PSU Specifications AC INPUT: 230 VAC 4A 50-60 Hz DC +3.3V +5V +12V1 -12V +5VSB Output 18A 17A 20A 0.3A 2A Max 400W Connectors 20+4 Pin Main Connectors:1 4-Pin 12V Connectors:1 SATA Connectors:2 4-Pin Molex Connectors:4 Floppy Drive Connectors:1 Detailed Specifications Dimensions: 125mm x 65mm x 100mm (W x H x D) Input Voltage: 230 VAC Input Current: 4A Input Frequency Range: 50-60 Hz PFC: No Power Good Signal: 150-450 ms Hold Up Time: 1MS-40MS Efficiency: 75% MTBF: 100, 000 Hours Protection: OVP / UVP/ OPP Power: 400W Operation Temperature: 45°C Safety: CE / ROHS Cooling: 8cm Fan Noise: < 17 d BA ...

SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 48.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800 M Hz f CK for 1600 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...

Hyper X Impact memory boasts the world's fastest SO-DIMM frequency- 2666 M Hz
- to keep you ahead of the curve & level up your
...

SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 44.75ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 32.125ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 933 M Hz f CK for 1866 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided componen


...

SPECIFICATIONS CL (IDD) 9 cycles Row Cycle Time (t R Cmin) 49.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 36ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 667 M Hz f CK for 1333 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...

SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 48.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800 M Hz f CK for 1600 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...

SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 48.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800 M Hz f CK for 1600 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...

SPECIFICATIONS CL (IDD) 9 cycles Row Cycle Time (t R Cmin) 49.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 36ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 667 M Hz f CK for 1333 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...