The TFC-1600MM provides Chassis SNMP reporting & supports port based management for the TFC-1600, 16-Bay Fiber Converter Chassis System. Instant access to cooling fan & power supply status reports. Web browser based management via Ethernet port or Command Line Interface management via RS-232 serial port. 1 x 10/100 Mbps Fast Ethernet RJ45 port & 1 x RS-232 Console ports for management Web Browser Based Management via Ethernet port or Command Line Interface Management via RS-232 port SNMP Agent Provides media Link/ Connection Speed/ Duplex status for each module Provides Cooling Fans & Power Supplies status 1 Year Limited Warranty ...

TRENDnet’s Home Smart Switch with Wireless Extender, model THA-101, is a combination smart electrical outlet & powerful N300 wireless extender. Use the free Apple or Android™ mobile app from any internet connection to turn on & off a light, fan, electronic device, or appliance. Create a daily schedule to turn on/off the outlet to match your needs or to give the illusion that you’re home. Place the THA-101 in an area of your home with low wireless coverage – the powerful built-in N300 wireless extender connects to your existing wireless router & broadcasts a strong wireless network. Power Controller Quick App-Based Setup Complete the intuitive app-based setup in minutes Remote Power Control Turn a light, fan, electronic device, or appliance on/off from any mobile internet connection On/ Off Schedule Create a weekly on/off schedule for a light, fan, or another device to match your needs or to give the illusion that you’re home No Clutter The compact form factor stays off the ground by plugging directly into an outlet Free App TRENDnet’s free Apple & Android™ app controls multiple THA-101 units from any internet connection Power Consumption See how much power your device is consuming with real-time electrical consumption information listed within the app Over Current Protection Trips relay when current exceeds 16 Amps Wireless Extender Wireless Extender Extends the range of your existing Wireless network N300 Wireless Proven 300 Mbps Wireless N Wireless Coverage Extended wireless coverage with MIMO antenna technology One Touch Connection Securely connect to the router at the touch of the Wi-Fi Protected Setup (WPS) button LED Indicators LED indicators convey device status Compatibility Works with Wireless N & G routers ...

TRENDnet’s TI-PG541 is a reliable IP30 unmanaged Po E+ DIN-rail switch with hardened components rated for extreme industrial environments. It offers four Gigabit Po E+ ports (Ports 1-4, 802.3at), one Gigabit port, one SFP slot, & a full Po E power budget of 120 Watts. Dual redundant power inputs (power adapter sold separately) with overload current protection support zero downtime requirements. An alarm output can be triggered by a primary and/or redundant power failure. Full Po E+ Power Budget Supplies up to 30 Watts of Po E/ Po E+ power per port (ports 1-4 802.3at/802.3af) with a 120 Watt Po E power budget Network Ports 5 x Gigabit Ethernet ports (port 1-4 Po E/ Po E+) & 1 x SFP slot Integrated DIN-Rail Mount IP30 rated metal enclosure with integrated DIN-rail mounting hardware Switching Capacity 12 Gbps switching capacity Redundant Power Dual redundant power inputs with overload current protection (power adapter sold separately: model 48VDC3000) Alarm Output Alarm output triggered by power failure of primary and/or redundant power (defined by DIP switch) Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10 KB), for increased performance Extreme Temperatures Hardened switch is rated for an operating temperature range of -20 to 60 degrees C (-4 to 140 degrees F) Electro Magnetic Compliance Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments Shock & Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), & vibration (IEC 60068-2-6) LED Indicators LED indicators convey power, redundant power, alarm, SFP, & network port status Grounding Point Grounding point protects equipment from external electrical surges Features 4 x Gigabit Po E+ (802.3at) ports, 1 x Gigabit port, & 1 x Gigabit SFP slot 120 W full Po E+ power budget 12 Gbps switching capacity Hardened IP30 rated metal switch with integrated DIN-Rail mount -20 to 60 degrees C (-4 to 140 degrees F) operating temperature range Dual redundant power inputs with overload current protection Alarm output triggered by power failure Power adapter sold separately Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 2- Port USB (Universal Serial Bus) Audio KVM Switch lets you control multimedia PCs with just one keyboard, monitor, mouse, microphone, & a set of speakers. The KVM switch not only means that you can share your monitor, keyboard & mouse but you can also share microphone & speakers. With just a simple press of a button, this KVM switch eliminates the hassle of cable swapping & switching between 2 PCs. ...

TRENDnet’s CAT5 PS/2 Server Interface Module, model TK-CAT5P, connects a TRENDnet CAT5 KVM switch to a computer with an available PS/2 & VGA port. One TK-CAT5P is required per computer. CAT5, 5E & 6 cable connections are supported. Features Computers Connects a TRENDnet CAT5 KVM switch to a computer Cable Support Supports CAT5, 5E, & 6 cable connections PS/2 Requires an available PS/2 port on the connected computer VGA Requires an available VGA port on the connected computer HD Resolution Supports resolution up to 1600 x 1200 pixels OS Support Supports Windows, Linux, & Sun operating systems ...

TRENDnet’s 8-Port Gigabit GREENnet Po E+ Switch, model TPE-TG44g, reduces equipment & installation costs by delivering data & power over existing Ethernet cables. This unmanaged switch offers four Gigabit Po E+ & four Gigabit non-Po E ports. The Po E+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan / Tilt / Zoom) internet cameras, & Vo IP telephony systems. Auto sensing technology delivers 30 watts to 802.3at Po E+ devices (up to 2 devices), 15 watts to 802.3af Po E devices (up to 4 devices), & only data to non-Po E devices. GREENnet technology reduces energy consumption by up to 75% when the switch is not in use. Boost office efficiency & reduce network congestion with a total switching capacity of 16 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case & quickly adds Po E+, Po E, & non-Po E devices to your network. IEEE 802.3at & IEEE 802.3af Power over Ethernet (Po E) compliant Supports Po E Class 2 (7 watts), 3 (15.4 watts), & 4 (30 watts) 4 x Gigabit Auto-MDIX Po E / Po E+ ports 4 x Gigabit Auto-MDIX ports Provides up to 30 watts for Po E+ (2 ports max.) Provides up to 15.4 watts for Po E (4 ports max.) Automatically detects the Po E class level of a Powered Device 16 Gbps switching fabric Forwarding Rate: 1000 Mbps (1, 488, 000 pps), 100 Mbps (148, 800 pps), 10 Mbps (14, 880 pps) Status LEDs: System Power, Po E, 1000 Mbps, & Link/ Activity 1K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception & transmission Store-&-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports & when a connected device is in standby mode Jumbo Frame support up to 9K Plug & Play Sturdy metal case 3-year limited warranty Standard IEEE 802.3 10 Base-T IEEE 802.3u 100 Base-TX IEEE 802.3ab 1000 Base-T IEEE 802.3at Power over Ethernet (Po E+) IEEE 802.3af Power over Ethernet (Po E) IEEE 802.3x Flow Control IEEE 802.3az Energy Efficient Ethernet Ports 4 x Gigabit Auto-MDIX Po E+ ports 4 x Gigabit Auto-MDIX ports Data Transfer Rate Ethernet: 10/20 Mbps (Half / Full Duplex) Fast Ethernet: 100/200 Mbps (Half / Full Duplex) Gigabit: 2000 Mbps (Full Duplex) Forwarding Rate 1, 000 Mbps: 1, 488, 000pps 100 Mbps: 148, 800pps 10 Mbps: 14, 880pps Data RAM Buffer 96 Kbytes Address Table 1K MAC entries Switch Fabric 16 Gbps Power Input: 100-240V 47-63 Hz, 2A Output: 53V DC, 1.2A External Power Adapter Diagnostic LEDs Power, Po E, 1000 Mbps, Link/ Activity Power Consumption Min: 4 watts (standby) Max: 65 watts Po E Max: 60 watts (4 x 15 watts Po E devices connected or 2 x 30 watts Po E+ devices connected) Temperature Operating: 0° ~ 40°C (32° ~ 104°F) Storage: -20° ~ 90°C (-4° ~ 194°F) Humidity Max 90% (non-condensing)

Dimensions 142 x 95 x 30 mm (5.6 x 3.7 x 1.2 in.) Weight 380 g (13.4 oz.) Certifications CE, FCC Po E Power over Ethernet Up to 15.4 watts for Po E Up to 30 watts for Po E+ Po E: pin 3, 6 for power+ & pin 1, 2 for power- (mode A)

...

TRENDnet’s 10-Port Gigabit Web Smart Po E+ Switch, model TPE-1020WS, delivers a 20 Gbps switching capacity with eight Po E+ Gigabit ports & two Gigabit Ethernet uplink ports shared with two SFP slots. This IPv 6 ready switch offers advanced traffic management, troubleshooting, security, energy saving GREENnet, & monitoring features at a reduced cost. Hardware Design Fanless rack mountable housing features eight Gigabit Po E+ ports (automatically supplies Po E+ (30 Watts) & Po E (15 Watts)) & two Gigabit Ethernet uplink ports shared with two SFP slots IPv 6 Ready This switch supports IPv 6 configuration & neighbor IPv 6 network support Traffic Management A broad range of network configurations are support by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (Co S), & Qo S queue scheduling Troubleshooting Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aides in rapid troubleshooting Security Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, & RADIUS are compatible with layered security controls Monitoring RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions Energy Savings Up to 70% energy saving GREENnet technology Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TRENDnet’s Gigabit Po E Splitter, model TPE-104GS, networks a non-Po E device in a remote location using a Po E network connection. The TPE-104GS splits a Gigabit Po E connection into separate power & Gigabit data sources. A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements. The included 2 & 2.5 mm jumper cables increase power pin device compatibility. Performance Po E Compatible with Po E (802.3af ) network connections Gigabit Ethernet Supports Gigabit network speeds Adjustable Dip Switch A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements Jumper Cables The included 2 & 2.5 mm jumper cables increase power pin device compatibility with the non-Po E networked device No Power Adapter The TPE-104GS is powered by the Po E connection Mounting Built-in mounting points increase installation flexibility Hardware Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af Device Interface 1 x Gigabit data/power in port 1 x Gigabit data out port 1 x Power out port LED indicators Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) Data Transfer Rate Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Jumper Cable 2.0 to 2.0 mm 2.0 to 2.5 mm Power Po E network cable input: 48 V DC, 0.38 A Output: 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A) Consumption: 0.3 Watts (max.) Operating Temperature 0 – 45 °C (32
- 113 °F) Operating Humidity Max. 90% non-condensing

Dimensions 70 x 45 x 25 mm (2.8 x 1.8 x 1 in.) Weight 60 g (2.1 oz.) Certifications CE


...

The Gigabit Power over Ethernet injector, model TPE-113GI, combines electrical power with a gigabit network connection to produce a Gigabit Power over Ethernet (Po E) signal. Connect this device to a non-Po E switch & then run an Ethernet cable for up to 100 meters to network Po E devices. No need to buy a Po E switch
- use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated Po E & non-Po E network at gigabit speeds
...

The Gigabit Po E+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (Po E+) signal. Connect this device to a non-Po E Gigabit switch & then run an Ethernet cable for up to 100 meters (328 ft.) to network Po E+ or Po E devices. The integrated power supply reduces installation clutter. Auto sensing technology delivers 30 Watts to 802.3at Po E+ devices or 15 Watts to 802.3af Po E devices. No need to buy a Po E switch—use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. IEEE 802.3at Po E+ (30 Watt) compliant Backwards compatible with IEEE 802.3af Po E (15 Watt) devices Automatically supplies a Po E+ (30 Watts) or Po E (15 Watts) connection to the device Integrated power supply Network devices for distances of up to 100 meters (328 ft.) 1 x 10/100/1000 Mbps Auto-MDIX Data In port 1 x 10/100/1000 Mbps Po E+ Auto-MDIX Data Out port Power port with LED indicator Easily install a Po E+ or POE device where a power outlet is not available Reduce installation & network equipment costs Safeguards network devices with short circuit protection 3-year limited warranty ...