TRENDnet’s TI-PG541 is a reliable IP30 unmanaged Po E+ DIN-rail switch with hardened components rated for extreme industrial environments. It offers four Gigabit Po E+ ports (Ports 1-4, 802.3at), one Gigabit port, one SFP slot, & a full Po E power budget of 120 Watts. Dual redundant power inputs (power adapter sold separately) with overload current protection support zero downtime requirements. An alarm output can be triggered by a primary and/or redundant power failure. Full Po E+ Power Budget Supplies up to 30 Watts of Po E/ Po E+ power per port (ports 1-4 802.3at/802.3af) with a 120 Watt Po E power budget Network Ports 5 x Gigabit Ethernet ports (port 1-4 Po E/ Po E+) & 1 x SFP slot Integrated DIN-Rail Mount IP30 rated metal enclosure with integrated DIN-rail mounting hardware Switching Capacity 12 Gbps switching capacity Redundant Power Dual redundant power inputs with overload current protection (power adapter sold separately: model 48VDC3000) Alarm Output Alarm output triggered by power failure of primary and/or redundant power (defined by DIP switch) Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10 KB), for increased performance Extreme Temperatures Hardened switch is rated for an operating temperature range of -20 to 60 degrees C (-4 to 140 degrees F) Electro Magnetic Compliance Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments Shock & Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), & vibration (IEC 60068-2-6) LED Indicators LED indicators convey power, redundant power, alarm, SFP, & network port status Grounding Point Grounding point protects equipment from external electrical surges Features 4 x Gigabit Po E+ (802.3at) ports, 1 x Gigabit port, & 1 x Gigabit SFP slot 120 W full Po E+ power budget 12 Gbps switching capacity Hardened IP30 rated metal switch with integrated DIN-Rail mount -20 to 60 degrees C (-4 to 140 degrees F) operating temperature range Dual redundant power inputs with overload current protection Alarm output triggered by power failure Power adapter sold separately Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 2- Port USB (Universal Serial Bus) Audio KVM Switch lets you control multimedia PCs with just one keyboard, monitor, mouse, microphone, & a set of speakers. The KVM switch not only means that you can share your monitor, keyboard & mouse but you can also share microphone & speakers. With just a simple press of a button, this KVM switch eliminates the hassle of cable swapping & switching between 2 PCs. ...

TRENDnet’s CAT5 PS/2 Server Interface Module, model TK-CAT5P, connects a TRENDnet CAT5 KVM switch to a computer with an available PS/2 & VGA port. One TK-CAT5P is required per computer. CAT5, 5E & 6 cable connections are supported. Features Computers Connects a TRENDnet CAT5 KVM switch to a computer Cable Support Supports CAT5, 5E, & 6 cable connections PS/2 Requires an available PS/2 port on the connected computer VGA Requires an available VGA port on the connected computer HD Resolution Supports resolution up to 1600 x 1200 pixels OS Support Supports Windows, Linux, & Sun operating systems ...

The 24-Port Gigabit Layer 2 Switch with 4 Shared Mini-GBIC Slots, model TL2-G244, provides a reliable foundation for a highly scalable managed network. The TL2-G244 features a 48 Gbps switch fabric, 802.1X authentication, SNMP v 3, & Multiple Spanning Tree (MSTP) support. Gigabit Ethernet ports & Mini-GBIC slots provide high speed uplinks to backbone switching or servers. Configure the switch using your choice of Telnet, Hyper Terminal, SNMP, or a Browser. View statistics captured for 17 unique switching parameters. Additional management features such as Port Trunking, IGMP snooping, Static & Dynamic VLAN, Load Balancing, RMON, Qo S, & RSTP allow administrators to effectively manage departmental work groups. Features 24 x 10/100/1000 Mbps Auto -MDIX Gigabit ports 4 x shared SFP (Mini-GBIC) slots 1 x RS-232 console port 8K MAC address entries 4 Mbit data RAM Buffer 802.1Q Tagged VLAN, Dynamic VLAN Learning GVRP, & Asymmetric VLAN (Up to 256 VLAN Groups) Spanning Tree Protocols: 802.1d STP, 802.1w RSTP, & 802.1s MSTP Quality of Service (Qo S): Port-based Qo S & bandwidth rate control, IEEE 802.1p, & DSCP 802.1X Port-Based Access Control & RADIUS Authentication IGMP snooping v 1, v 2 (Up to 64 entries) Link Aggregation & Port Trunking: Static & 802.3ad Dynamic LACP Store-&-Forward switching method 802.3x Flow Control for full duplex & backpressure for half duplex operation Broadcast, Multicast, & DLF (Destination Lookup Failure) Storm Filtering protection Supports port status control (enable/disable, auto-negotiation, speed, duplex, & flow-control) Port Mirroring for network traffic analysis Syslog support for external device logging Switch management with: SNMP v 1, v 2c, v 3 Telnet SSH Console (RS-232) HTTP/HTTPS web browser RMON (4 groups) Front panel diagnostic LED indicators 19” (1U) Rack mount design with mounting hardware included 3-year limited warranty Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com ...

TRENDnet’s 8-Port Gigabit GREENnet Po E+ Switch, model TPE-TG44g, reduces equipment & installation costs by delivering data & power over existing Ethernet cables. This unmanaged switch offers four Gigabit Po E+ & four Gigabit non-Po E ports. The Po E+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan / Tilt / Zoom) internet cameras, & Vo IP telephony systems. Auto sensing technology delivers 30 watts to 802.3at Po E+ devices (up to 2 devices), 15 watts to 802.3af Po E devices (up to 4 devices), & only data to non-Po E devices. GREENnet technology reduces energy consumption by up to 75% when the switch is not in use. Boost office efficiency & reduce network congestion with a total switching capacity of 16 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case & quickly adds Po E+, Po E, & non-Po E devices to your network. IEEE 802.3at & IEEE 802.3af Power over Ethernet (Po E) compliant Supports Po E Class 2 (7 watts), 3 (15.4 watts), & 4 (30 watts) 4 x Gigabit Auto-MDIX Po E / Po E+ ports 4 x Gigabit Auto-MDIX ports Provides up to 30 watts for Po E+ (2 ports max.) Provides up to 15.4 watts for Po E (4 ports max.) Automatically detects the Po E class level of a Powered Device 16 Gbps switching fabric Forwarding Rate: 1000 Mbps (1, 488, 000 pps), 100 Mbps (148, 800 pps), 10 Mbps (14, 880 pps) Status LEDs: System Power, Po E, 1000 Mbps, & Link/ Activity 1K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception & transmission Store-&-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports & when a connected device is in standby mode Jumbo Frame support up to 9K Plug & Play Sturdy metal case 3-year limited warranty Standard IEEE 802.3 10 Base-T IEEE 802.3u 100 Base-TX IEEE 802.3ab 1000 Base-T IEEE 802.3at Power over Ethernet (Po E+) IEEE 802.3af Power over Ethernet (Po E) IEEE 802.3x Flow Control IEEE 802.3az Energy Efficient Ethernet Ports 4 x Gigabit Auto-MDIX Po E+ ports 4 x Gigabit Auto-MDIX ports Data Transfer Rate Ethernet: 10/20 Mbps (Half / Full Duplex) Fast Ethernet: 100/200 Mbps (Half / Full Duplex) Gigabit: 2000 Mbps (Full Duplex) Forwarding Rate 1, 000 Mbps: 1, 488, 000pps 100 Mbps: 148, 800pps 10 Mbps: 14, 880pps Data RAM Buffer 96 Kbytes Address Table 1K MAC entries Switch Fabric 16 Gbps Power Input: 100-240V 47-63 Hz, 2A Output: 53V DC, 1.2A External Power Adapter Diagnostic LEDs Power, Po E, 1000 Mbps, Link/ Activity Power Consumption Min: 4 watts (standby) Max: 65 watts Po E Max: 60 watts (4 x 15 watts Po E devices connected or 2 x 30 watts Po E+ devices connected) Temperature Operating: 0° ~ 40°C (32° ~ 104°F) Storage: -20° ~ 90°C (-4° ~ 194°F) Humidity Max 90% (non-condensing)

Dimensions 142 x 95 x 30 mm (5.6 x 3.7 x 1.2 in.) Weight 380 g (13.4 oz.) Certifications CE, FCC Po E Power over Ethernet Up to 15.4 watts for Po E Up to 30 watts for Po E+ Po E: pin 3, 6 for power+ & pin 1, 2 for power- (mode A)

...

TRENDnet’s Gigabit Po E Splitter, model TPE-104GS, networks a non-Po E device in a remote location using a Po E network connection. The TPE-104GS splits a Gigabit Po E connection into separate power & Gigabit data sources. A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements. The included 2 & 2.5 mm jumper cables increase power pin device compatibility. Performance Po E Compatible with Po E (802.3af ) network connections Gigabit Ethernet Supports Gigabit network speeds Adjustable Dip Switch A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements Jumper Cables The included 2 & 2.5 mm jumper cables increase power pin device compatibility with the non-Po E networked device No Power Adapter The TPE-104GS is powered by the Po E connection Mounting Built-in mounting points increase installation flexibility Hardware Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af Device Interface 1 x Gigabit data/power in port 1 x Gigabit data out port 1 x Power out port LED indicators Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) Data Transfer Rate Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Jumper Cable 2.0 to 2.0 mm 2.0 to 2.5 mm Power Po E network cable input: 48 V DC, 0.38 A Output: 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A) Consumption: 0.3 Watts (max.) Operating Temperature 0 – 45 °C (32
- 113 °F) Operating Humidity Max. 90% non-condensing

Dimensions 70 x 45 x 25 mm (2.8 x 1.8 x 1 in.) Weight 60 g (2.1 oz.) Certifications CE


...

The Gigabit Power over Ethernet injector, model TPE-113GI, combines electrical power with a gigabit network connection to produce a Gigabit Power over Ethernet (Po E) signal. Connect this device to a non-Po E switch & then run an Ethernet cable for up to 100 meters to network Po E devices. No need to buy a Po E switch
- use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated Po E & non-Po E network at gigabit speeds
...

The Gigabit Po E+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (Po E+) signal. Connect this device to a non-Po E Gigabit switch & then run an Ethernet cable for up to 100 meters (328 ft.) to network Po E+ or Po E devices. The integrated power supply reduces installation clutter. Auto sensing technology delivers 30 Watts to 802.3at Po E+ devices or 15 Watts to 802.3af Po E devices. No need to buy a Po E switch—use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. IEEE 802.3at Po E+ (30 Watt) compliant Backwards compatible with IEEE 802.3af Po E (15 Watt) devices Automatically supplies a Po E+ (30 Watts) or Po E (15 Watts) connection to the device Integrated power supply Network devices for distances of up to 100 meters (328 ft.) 1 x 10/100/1000 Mbps Auto-MDIX Data In port 1 x 10/100/1000 Mbps Po E+ Auto-MDIX Data Out port Power port with LED indicator Easily install a Po E+ or POE device where a power outlet is not available Reduce installation & network equipment costs Safeguards network devices with short circuit protection 3-year limited warranty ...

TRENDnet’s 16-Port Gigabit Web Smart Po E+ Switch, model TPE-1620WS, delivers a 32 Gbps switching capacity with 16 Po E+ Gigabit ports & two shared SFP slots. This IPv 6 ready switch offers advanced traffic management, troubleshooting, security, energy saving GREENnet, & monitoring features at a reduced cost. Ease of Use Hardware Design Rack mountable housing features 16 Gigabit Po E+ ports (automatically supplies Po E+ (30 Watts) & Po E (15 Watts)) & two shared SFP slots IPv 6 Ready This switch supports IPv 6 configuration & neighbor IPv 6 network support Traffic Management A broad range of network configurations are support by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (Co S), & Qo S queue scheduling Troubleshooting Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aides in rapid troubleshooting Security Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, & RADIUS are compatible with layered security controls Monitoring RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions Energy Savings Up to 70% energy saving GREENnet technology Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com ...

TPE-224WS 26-port Smart Switch integrates power over Ethernet (Po E) & network management features into a cost effective & scalable solution. The TPE-224WS reduces equipment cost by delivering data & power over existing network cable infrastructure. The switch offers advanced network management features such as VLAN & Qo S to meet today's secured network applications. Support for SNMP v 1, 802.1x, STP, 802.1Q VLAN, Qo S, IGMP snooping, Broadcast Storm Control & port Trunking provide a cost effective, scalable & secure backbone Po E switch solution for SMB networks. Power over Ethernet (Po E) technology reduces equipment & installation costs by delivering data & power over existing Ethernet cables. SNMP support enables the switch to provide valuable status & event information, saving system administrators time & resources. Access the Web-browser management interface & segment up to 256 Virtual Local Area Networks, manage network priority with 802.1p support & dedicate bandwidth with port-based Trunking. Reduces equipment cost by delivering data & power over existing network cables 24 x Po E 10/100 Mbps ports, 4 x Gigabit Auto-MDIX ports & 2 x shared Mini-GBIC slots 12.8 Gbps switching capacity with SNMP v 1, 802.1X & STP support Features 802.1Q VLAN, Asymmetric VLAN, Qo S, IGMP, Trunking & Mirroring Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...