The TL-WA5110G 54M High Power Wireless Access Point is dedicated to Small Office/ Home Office (SOHO) & long distance wireless network solutions. It integrates the functions of a Wireless Access Point, WISP Client, Firewall, & NAT-Router. It features high output power & high receive sensitivity can significantly extend the transmission range to reduce dead spots & to deliver a more stable wireless connection. The TL-WA5110G provides three operation modes for multiple users to access the Internet: AP client router, AP router & AP. In AP client router mode, it works as a WISP CPE. In AP router mode, it can access the Internet via an ADSL/ Cable Modem. In AP mode it can work in various modes, such as Access Point/ Client/WDS Bridge/ Repeater. ...

What This Product Does 10-Gigabit 2-Port SFP+ Module TX432 is an interface card providing two 10G SFP+ ports. It is applicable to multiple TP-LINK switch models/SFP+ transceivers/SFP+ cables. Features 2 10G SFP+ slots

Dimensions (W*D*H):131*92*31 mm

...

TP-LINK Jet Stream gigabit L2 managed switch TL-SG3216 provides 16 10/100/1000 Mbps ports. The switch provides high performance, enterprise-level Qo S, advanced security strategies & rich layer 2 management features. Moreover, the switch also comes equipped with 2 combo SFP slots, expanding your network flexibly. This Jet Stream gigabit L2 managed switch is cost-effective for the ideal small & medium business solution. TL-SG3216 has robust security & management features. The IP-MAC-Port-VID Binding & Access Control List (ACL) functions protect against broadcast storm, ARP & Denial-of-Service (Do S) attacks, etc. Quality of Service provides enhanced traffic management capabilities to move your data smoother & faster. Anymore, the easy-to-use web management interfaces, along with CLI, SNMP & RMON, mean faster setup & configuration with less downtime. For workgroup & departments requiring cost-sensitive Layer 2 switch & gigabit capability, TP-LINK Jet Stream L2 managed Switch TL-SG3216 provides you the ideal access-edge solution. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TP-LINK’s T2700G-28TQ is an L2+ managed switch designed to build a highly accessible, scalable, & robust network. The switch is equipped with 24 Gigabit RJ-45 ports, 4 Combo Gigabit SFP & up to 4 10 Gbps SFP slots, giving network administrator great network flexibility. It supports basic Layer 3 features like static routing & RIP v 1/v 2 by default & can be upgraded to support abundant Layer 3 features such OSPF/ECMP/PIM/VRRP with the addition of a Layer 3 license. What’s more, with physical stacking feature & optional redundant external power unit, T2700G-28TQ provides a robust network with efficient redundancy. T2700G-28TQ provides robust security to help secure your enterprise network. TP-LINK’s T2700G-28TQ L2+ managed switch provides a reliable & cost-effective solution for enterprise, campus & ISP networks. ...

TP-LINK Jet Stream gigabit L2 managed switch TL-SG3424 provides 24 10/100/1000 Mbps ports. The switch provides high performance, enterprise-level Qo S, advanced security strategies & rich layer 2 management features. Moreover, the switch also comes equipped with 4 combo SFP slots, expanding your network flexibly. This Jet Stream gigabit L2 managed switch is cost-effective for the ideal small & medium business solution. TL-SG3424 has robust security & management features. The IP-MAC-Port-VID Binding & Access Control List (ACL) functions protect against broadcast storm, ARP & Denial-of-Service (Do S) attacks, etc. Quality of Service (Qo S, L2 to L4) provides enhanced traffic management capabilities to move your data smoother & faster. Anymore, the easy-to-use web management interfaces, along with CLI, SNMP & RMON, mean faster setup & configuration with less downtime. For workgroup & departments requiring cost-sensitive Layer 2 switch & gigabit capability, TP-LINK Jet Stream L2 managed Switch TL-SG3424 provides you the ideal access-edge solution. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TP-LINK’s M5350 is at the forefront of wireless 3G sharing. Equipped with a built-in 3G modem, you can instantly established your own Wi-Fi hotspot simply by inserting a 3G SIM card at the back of the device. With up to 21.6 Mbps download & 5.76 Mbps upload speeds, the M5350 is able to provide 3G wireless sharing to up to 10 users simultaneously. Its pocket-sized design & powerful 2000m Ah internal battery make it an ideal travel companion, allowing users to work or play for hours on end. Besides, with its innovative OLED display, users can have a much more intuitive view of the device’s working status, such as signal strength, network type (2G/3G), Wi-Fi status, message, Internet connection status, battery meter, connection mode & traffice statistics. TP-LINK’s M5350 is at the forefront of wireless 3G sharing, combining the mobility of 3G broadband connections with the flexibility of 802.11n Wi-Fi
- No other bulky devices required, simply insert a 3G SIM card to create a 3G Wi-Fi hotspot to share on the move, wherever 3G coverage is available. Equipped with a built-in 3G modem
- No other bulky devices required HSPA+ supported with up to 21.6 Mbps download & 5.76 Mbps upload speeds Powerful 2000m Ah battery is ideal for extended hours of outdoor use Supports up to 10 users simultaneously

...

TP-LINK’s M5360 is the perfect combination of 3G Wi-Fi Hotspot & portable power bank at the forefront of wireless 3G sharing. Equipped with a built-in 3G modem, instantly establish your own Wi-Fi hotspot simply by inserting a 3G SIM card. With up to 21.6 Mbps download & 5.76 Mbps upload speeds, the M5360 is able to provide 3G wireless sharing to up to 10 users simultaneously. Its pocket-sized design & powerful 5200m Ah internal battery make it an ideal travel companion, allowing users to work or play for hours & even while charging smartphones or tablets while on the go. What’s more, with its innovative OLED display, users can have a much more intuitive view of the device’s operating status, such as traffic statistics, Wi-Fi status, user numbers, network type (2G/3G), signal strength, Internet connection status, messages, battery meter. ...

TP-LINK’s M7350 is at the forefront of wireless 4G sharing. Just insert a 4G SIM card into the device to instantly establish a selectable dual band Wi-Fi hotspot. With up to 150 Mbps download & 50 Mbps upload speeds, the M7350 is able to provide 4G wireless sharing to up to 15 users simultaneously. Its pocket-sized design & powerful 2550m Ah internal battery make it an ideal travel companion, allowing users to work or play for 10 hours. With its innovative TFT-display, users can have a much more intuitive view of the device’s operating status, such as signal strength, network type (4G/3G/2G), Wi-Fi status, messages, Internet, traffic statistics & battery life. ...

The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required)or with TP-LINK's 19''system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.

...

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...