TP-LINK’s T2700G-28TQ is an L2+ managed switch designed to build a highly accessible, scalable, & robust network. The switch is equipped with 24 Gigabit RJ-45 ports, 4 Combo Gigabit SFP & up to 4 10 Gbps SFP slots, giving network administrator great network flexibility. It supports basic Layer 3 features like static routing & RIP v 1/v 2 by default & can be upgraded to support abundant Layer 3 features such OSPF/ECMP/PIM/VRRP with the addition of a Layer 3 license. What’s more, with physical stacking feature & optional redundant external power unit, T2700G-28TQ provides a robust network with efficient redundancy. T2700G-28TQ provides robust security to help secure your enterprise network. TP-LINK’s T2700G-28TQ L2+ managed switch provides a reliable & cost-effective solution for enterprise, campus & ISP networks. ...

TP-LINK Jet Stream gigabit L2 managed switch TL-SG3424 provides 24 10/100/1000 Mbps ports. The switch provides high performance, enterprise-level Qo S, advanced security strategies & rich layer 2 management features. Moreover, the switch also comes equipped with 4 combo SFP slots, expanding your network flexibly. This Jet Stream gigabit L2 managed switch is cost-effective for the ideal small & medium business solution. TL-SG3424 has robust security & management features. The IP-MAC-Port-VID Binding & Access Control List (ACL) functions protect against broadcast storm, ARP & Denial-of-Service (Do S) attacks, etc. Quality of Service (Qo S, L2 to L4) provides enhanced traffic management capabilities to move your data smoother & faster. Anymore, the easy-to-use web management interfaces, along with CLI, SNMP & RMON, mean faster setup & configuration with less downtime. For workgroup & departments requiring cost-sensitive Layer 2 switch & gigabit capability, TP-LINK Jet Stream L2 managed Switch TL-SG3424 provides you the ideal access-edge solution. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The TL-SG3424P provides 24 10/100/1000 Mbps ports that supports 802.3at/af-compliant Po E, with a total Po E power supply up to 320W, powerful & flexible enough for users to deploy wireless access points or IP-based network surveillance cameras. The switch also comes equipped with 4 combo SFP slots, expanding your network flexibly. In addition, it provides high performance, enterprise-level Qo S, advanced security strategies & rich layer 2 management features. With all these advanced features, the Jet Stream TM Gigabit L2 Managed Po E Switch is an ideal choice for small & medium business networking. Supports 24 ports of 802.3at/af-compliant Power over Ethernet with a total power supply of 320W IP-MAC-Port-VID Binding, ACL, Port Security, Do S Defend, Storm control, DHCP Snooping, 802.1X Authentication & Radius provide you robust security strategies L2/L3/L4 Qo S & IGMP snooping optimize voice & video application WEB/CLI managed modes, SNMP, RMON bring abundant management features ...

TP-LINK’s M5350 is at the forefront of wireless 3G sharing. Equipped with a built-in 3G modem, you can instantly established your own Wi-Fi hotspot simply by inserting a 3G SIM card at the back of the device. With up to 21.6 Mbps download & 5.76 Mbps upload speeds, the M5350 is able to provide 3G wireless sharing to up to 10 users simultaneously. Its pocket-sized design & powerful 2000m Ah internal battery make it an ideal travel companion, allowing users to work or play for hours on end. Besides, with its innovative OLED display, users can have a much more intuitive view of the device’s working status, such as signal strength, network type (2G/3G), Wi-Fi status, message, Internet connection status, battery meter, connection mode & traffice statistics. TP-LINK’s M5350 is at the forefront of wireless 3G sharing, combining the mobility of 3G broadband connections with the flexibility of 802.11n Wi-Fi
- No other bulky devices required, simply insert a 3G SIM card to create a 3G Wi-Fi hotspot to share on the move, wherever 3G coverage is available. Equipped with a built-in 3G modem
- No other bulky devices required HSPA+ supported with up to 21.6 Mbps download & 5.76 Mbps upload speeds Powerful 2000m Ah battery is ideal for extended hours of outdoor use Supports up to 10 users simultaneously

...

TP-LINK’s M5360 is the perfect combination of 3G Wi-Fi Hotspot & portable power bank at the forefront of wireless 3G sharing. Equipped with a built-in 3G modem, instantly establish your own Wi-Fi hotspot simply by inserting a 3G SIM card. With up to 21.6 Mbps download & 5.76 Mbps upload speeds, the M5360 is able to provide 3G wireless sharing to up to 10 users simultaneously. Its pocket-sized design & powerful 5200m Ah internal battery make it an ideal travel companion, allowing users to work or play for hours & even while charging smartphones or tablets while on the go. What’s more, with its innovative OLED display, users can have a much more intuitive view of the device’s operating status, such as traffic statistics, Wi-Fi status, user numbers, network type (2G/3G), signal strength, Internet connection status, messages, battery meter. ...

The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required)or with TP-LINK's 19''system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.

...

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit & receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1550nm on transferring data & at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data & at 1550nm on receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit & receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on transferring data & at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data & at 1310nm on receiving data. Another TP-LINK's media converter MC111CS is just one of the examples to cooperate with MC112CS. Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

...

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T & IEEE802.3z 1000 Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser

Specification at a full wire speed forwarding rate. It works at 850nm on both transmitting & receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19'system chassis, Auto MDI/MDI-X for TX port, & front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers.

...