Convert & extend a 10/100 Mbps Ethernet connection up to 2 km over Multi Mode ST fiber Best value fiber media converter ...

This industrial grade 10/100 Multi Mode Fiber Ethernet Industrial Media Converter converts between 10 Base-T or 100 Base-TX electrical Ethernet signals & 100 Base-FX optical Ethernet signals to provide a simple & cost-effective way to connect two Cat 5 Ethernet network segments together using multimode fiber cable. ...

The POESPLT100 10/100 Mbps Po E Power over Ethernet Splitter with 5-12V Output separates the data & power connections received from your Power Sourcing Equipment (PSE) such as a single port Po E injector or a Po E Switch. At the remote end of your Po E connection, the POESPLT100 gives you a standard DC jack with selectable 5, 7.5, 9 or 12V output & separate Ethernet data connection allowing you to take advantage of power of Ethernet infrastructure, & use a variety of peripherals in places where no wall outlet exists. ...

Easily extend your 10/100 Mbps Ethernet network up to 1km. The 110VDSLEXT VDSL Ethernet extender kit means that you can span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity. The device means that you can run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install & provides an out-of-the-box solution as both the Ethernet-VDSL extender & receiver units are included. A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles & distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming & data to share the same telephone pair without interference. The 110VDSLEXT requires only a single pair of wires to function, while offering the ability to use multiple sets of the devices to create several simultaneous connections to your remote building. In these multiple set configurations, you have the ability to use up to 4 sets over a single Cat 5e or Cat 6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (up to two sets only over standard Cat 5). ...

Connect & share a high-speed USB (Universal Serial Bus) 2.0 peripheral over a gigabit network. The USB1000IP 10/100/1000 Mbps Gigabit 1-Port USB (Universal Serial Bus) over IP Device Server provides a simple & convenient way to extend & share a USB (Universal Serial Bus) device over long distances, for multiple users connected to your Ethernet network. This flexible device auto-detects Ethernet network link speed & can connect through a network hub/switch/router, or directly to a PC, making it perfect for connecting & sharing devices such as mass storage, card readers, digital cameras, webcams, printers (including multi-function), fax, scanners or serial adapters with multiple users. Unlike slower 10/100 devices, gigabit speeds allow attached USB (Universal Serial Bus) 2.0 devices to function at full speeds as if they were locally connected. The USB (Universal Serial Bus) over IP Device server

Includes:: bundled software that provides a simple interface to view the status of, & connect to the detected device over the LAN, & features the option to automatically connect to your device after a reboot.

...

The PEX1000MMST 1000 Mbps Gigabit Fiber Optic (MM ST) PCIe Ethernet Adapter Card offers the perfect " Fiber-to-the-desk" solution. Providing a simple way to connect a computer directly to a high-speed fiber network, this Fiber Gigabit Ethernet Adapter card can be installed in the computer through any PCI Express slot & is perfectly suited to high bandwidth applications with support for Full Duplex operation & Gigabit transfer speeds. ...

Convert & extend a Gigabit Ethernet connection up to 550 m over Multi Mode SC fiber Provides increased bandwidth & high data throughput by eliminating network bottlenecks & congestion Compact, lightweight design ensures portability & simplifies mounted installations Easily installed into any scenario with little to no configurations needed The MCMGBSC055GB 1000 Mbps Gigabit Multi Mode Fiber Ethernet Media Converter SC
- 550m converts transparently to/from 1000 Base-T Ethernet signals & 1000 Base-SX optical signals, providing a cost-effective Ethernet-fiber/copper-fiber link, in order to extend an Ethernet network connection over a Multimode fiber backbone. Supporting a maximum Multimode fiber optic cable distance of 550 meters (0.34 miles), this Fiber Media Converter delivers a simple solution for connecting Gigabit Ethernet networks to remote locations using SC-terminated MM fiber, while ensuring solid network performance & scalability. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. WhatÂ’s in the box Media Converter Power Adapter User's Manual
...

The MCMGBSC15GB Ethernet Media Converter converts transparently to/from 1000 Base-T Ethernet signals & 1000 Base-LH optical signals, providing a cost-effective Ethernet-fiber/copper-fiber link, in order to extend an Ethernet network connection over a Single Mode fiber backbone. Supporting a maximum Single Mode fiber optic cable distance of 15km (9.32 miles), the Fiber Media Converter delivers a simple solution for connecting Gigabit Ethernet networks to remote locations using SC-terminated SM fiber, while ensuring solid network performance & scalability. 1310nm Wavelength Supports transparent Q-in-Q double tagged frames Supports IEEE 802.1q Tag VLAN pass through Supports a maximum Single-mode fiber optic cable distance of 15km Supports 802.3ab 1000 Base-TX, & 1000 Base-LH industry standards Simple installation Supports forced full duplex or auto-negotiation modes on the fiber link LED Indicators for simple Ethernet/ Fiber network link monitoring Compact design Auto negotiation MDI/MDI-X (Crossover for TX port) Auto detects half/full duplex transfer mode from the TX port ...

Connect a PC directly to a multimode SC fiber network through an available PCI slot. The PCI100MMSC 100 Mbps fiber optic (MM SC) PCI Ethernet adapter card offers the perfect " Fiber-to-the-desk" solution allowing you to add a multimode SC fiber port to your system through an available standard or low-profile PCI slot. A simple solution for connecting a computer directly to a fiber network, the fiber Ethernet adapter card can be installed in the computer through any PCI slot & is perfectly suited for high bandwidth applications with support for full duplex operation & 10/100 Mbps transfer speeds at distances of up to 2km. Ideal for secure network setups, the PCI100MMSC offers a direct fiber connection which is not susceptible to electronic interference like standard RJ45 networks. ...

Add the speed, reliability, & security of a Fiber Ethernet connection to a PCI compatible PC! The PCI100MMST 100 Mbps Fiber Optic (MM ST) PCI Ethernet NIC offers the perfect " Fiber-to-the-desk" solution, enabling you to connect a computer directly to a fiber network. The PCI Fiber Ethernet adapter card is easy to install & is perfectly suited for high bandwidth applications with support for Full Duplex operation & 10/100 Mbps transfer speeds. ...