The AT-CV5M02 is the second generation management card for the AT-CV5000 media conversion chassis. With the addition of a management card to the chassis, all the blades setup options can be configured via the management module. This allows a network administrator to change configuration remotely, & monitor the status of both the chassis & the links. Features Provides Management support to Converton chassis SNMP, Telnet & Local RS232 support Event Logging Syslog support DHCP support 802.3ah Remote blade management Limited lifetime warranty Web GUI Interface Management Card Redundancy Multiple Local & Remote Line Card Image Download Local & Remote Line Card Configuration backup in Management Card Auto-Copy Line Card Configuration Local & Remote Line Card Port Flow Control Support NTP Client Broadcast Storm Protection ...

When upgrading your traditional 10 Mbps Ethernet network or extending your 100 Mbps Fast Ethernet network, switches are required, the AT-FS232 switch provides the ideal solution. The AT-FS232 will connect any two copper networks
- irrespective of speed, & allow any copper network to be extended over a Fast Ethernet fiber link up to distances of 100km. Many new backbone switch products now support the industry standard IEEE 802.1Q

Specification for VLANs (Virtual LANs), which requires extra long data packets to be sent on the network. The AT-FS232 switch has been designed to be fully compatible with these long packets, allowing them to be used in modern networks. Switches not supporting this feature will discard these extra long packets, making them unsuitable for modern networks. The switches can be used almost anywhere due to their small physical size & external power supply. Alternatively, they can be mounted in a chassis along with Allied Telesis media converters. This allows users to construct any mix of network conversions, with the additional option of a redundant power supply. The Missing Link feature allows the ports on the media converter to pass the " Link" status of their connections to each other. When the media converter detects a problem with one of the ports, such as the loss of connection to a node, it shuts down the connection to the other port, thus notifying the node that the connection has been lost. The value to this type of network monitoring & fault notification is that some hubs & switches can be configured to take a specific action in the event of the loss of connection on a port. In some cases, the unit can be configured to seek a redundant path to a disconnected end-node or send out a trap to a network management station alerting the network administrator of the problem. The Smart Missing Link mode is one step advance from the Missing Link mode. In SML mode, a downstream Link LED is forced to blink to indicate the link status of the local section is OK, but at the section where the physical link is down, the Link LED will be forced off. This special feature is useful in determining where the actual link is down & where the link is still good. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

The Allied Telesis AT-FS700 series provides powerful 10/100 switching solutions to desktop & small network environments. Each switch features full auto-negotiating 10/100 ports, which automatically detect speed & duplex modes of attached devices & allow the switch to automatically configure for the best possible performance. The AT-FS708 is supplied with 8 UTP ports for standard desktop or rack mount applications. The AT-FS700 switches are fully auto-configuring requiring minimal or no set-up by the user. The auto-negotiating ports allow seamless & simple connectivity between existing 10 Mbps Ethernet & 100 Mbps Fast Ethernet UTP devices & all units can be installed in minutes. Front panel LEDs allow users to monitor the switch status providing simple "at a glance" management. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis' Web Smart switches help network managers afford managed switches in networks where they were previously not feasible, provide management functionality at the network edge & get the most value for their dollar. With industry-standard protocols, fiber media support via SFP's, & simple plug-&-play usability right out of the box, Web Smart switches are the ideal cost-effective solution for any network. Allied Telesis' FS750 Series Web Smart Switches integrate the simplicity of unmanaged switches with the performance & reliability of managed switches to provide a cost-effective solution integrating management at the edge of the network. Web Smart switches provide key features using simple web-based management, such as: port-based VLANs, 802.1p Qo S, port trunking/link aggregation, port mirroring, priority queue's, spanning tree & 802.1x security support. With up to 8K MAC addresses & a 512K packet buffer, the FS750 Series Web Smart switches are ideal options for integrating management into your network solution. ...

Capable of providing up to 12 ports of Class 2 802.3af POE power (6 ports Class 3), the ATFS750/24POE is ideally suited for those applications using security camera, wireless access points, IP phones, or & other POE powered device. The POE options eliminates the need for power rewiring & minimizes the clutter of power supplies & adapters in awkward places. The Web Smart AT-FS750/24 features 24 10/100TX ports & 2 combo tri-speed copper / SFP ports for Gigabit connections. It is an ideal fit for the SMB / SOHO market. This switch provides managed features ideal for simple Qo S applications, & provides basic monitoring tools to improve your network. The Web Smart functions provide Qo S features suitable for multimedia applications. With the web-based interface, you can set up 802.1Q VLANs to segregate traffic, Qo S to prioritize mission-critical data such as voice or video packets, & link aggregation to create traffic pipelines. The AT-FS750/24 also provides network monitoring tools such as port mirroring & basic port statistics. Remote product management enables simple monitoring from anywhere. ...

Allied Telesis' GS950 Series Web Smart Switch integrates the simplicity of unmanaged switches with the performance & reliability of managed switches to provide a cost-effective solution integrating management at the edge of the network. Web Smart switch provides key features using simple web-based management, such as: port-based VLANs, 802.1p Qo S, port trunking/link aggregation, port mirroring, priority queue's, spanning tree & 802.1x security support. With up to 8K MAC addresses & a 512K packet buffer, the GS950 Series Web Smart switch is ideal options for integrating management into your network solution. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis' Web Smart switch integrates the simplicity of unmanaged switches with the performance & reliability of managed switches to provide a cost-effective solution for users to integrate management at the edge of their network. This Web Smart switch provides a network manager some key features using the simple web-based management function such as; port based Vlans, 802.1p Qo S, port trunking/link aggregation, port mirroring, priority queue's & 802.1x security support. With support of up to 8K MAC addresses & a 512K packet buffer GS950/48 Web Smart switch is an ideal option for integrating management into your network solution. Never thought you could afford managed switches in your network? Always wanted to provide management functionality at the edge? Now's your chance. Allied Telesis' Web Smart switch truly helps network managers get the most value for their dollar. With industry standard protocols, fiber media support via the SFP's & simple plug n play usability right out of the box how can you go wrong implementing this cost-effective solution into your network? Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The MC1008 series Ethernet media converters are designed to extend the distance of your network by interconnecting LAN devices that are physically separated by large distances. These media converters have the functionality to connect any managed/unmanaged 1000 Mbps switch or hub using standard 1000T RJ-45 connections & convert the signal to 1000 Base optical via a GBIC. The pluggable optics feature allows for flexible network configurations of reach whilst reducing the number of products for sparing & inventory. ...

The MC1008 series Ethernet media converters are designed to extend the distance of your network by interconnecting LAN devices that are physically separated by large distances. These media converters have the functionality to connect any managed/unmanaged 1000 Mbps switch or hub using standard 1000T RJ-45 connections & convert the signal to 1000 Base optical via the SFP. The pluggable optics feature allows for flexible network configurations of reach whilst reducing the number of products for sparing & inventory. The AT-MC1008/SP media converter features a 1000T twisted pair port & an SFP port. The twisted pair port has an RJ45 connector & a maximum operating distance of 100 meters (328 feet). The fiber optic port has an SFP slot & a maximum operating distance dependent on the SFP. Although the provisioning of Gigabit Ethernet connections is becoming relatively inexpensive, thanks in part to the availability of lower-cost copper Gigabit network adapters, the distance limitations of copper cabling make fiber segments a necessity in most networks. Small, comparatively inexpensive copper to fiber Gigabit Ethernet media converters present a simple & very cost-effective way of connecting Gigabit Ethernet LANs over extended distances. Each small media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are used, up to 12 standalone devices can be inserted into a low-cost AT-MCR12 rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis. ...

The Allied Telesis range of Fast Ethernet media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting both SC & ST fiber connectors, the converters can be used to extend networks with up to 40km of single-mode fiber. The Missing Link feature enables the fiber optic ports on the media converter to pass the ' Link' status of their connections to each other. When the media converter detects a problem with one of the ports, such as the loss of connection to an end-node, the media converter shuts down the connection to the other port, thus notifying the node that the connection has been lost. The media converters feature auto MDI/MDI-X, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This ' Link Test' feature allows installers to check for cable faults without the need for expensive fiber optic test equipment. ...