PRODUCT
Features: Virtual LANs with 802.1Q VLAN tagging, load balancing & priority queuing for network optimization CPU
...

The AT-6101 Power over Ethernet (Po E) injector provides data & power through the Ethernet cable to Po E capable devices such as wireless access points, IP cameras, Vo IP phones & other devices that support the IEEE 802.3af standard. Save money by using the AT-6101 Po E injector to remotely power Vo IP phones, IP cameras, wireless access points & any other Po E powered device. There is no need for additional power cabling. The AT-6101 feeds power to the equipment through the same cable used for data. Connecting the AT-6101 to a UPS protected power line helps protect the powered device from power outages. The AT-6101 Po E injector also helps protect your network investment. You wont need to replace the existing LAN infrastructure to connect Po E enabled devices. ...

As a member of the 8000S family the 8000S/16 is a low cost managed Fast Ethernet switch with a 1RU form factor. The 8000S/16 is an ideal choice for small environments or workgroups. A managed Fast Ethernet switch with a SFP expansion bay the 8000/16 is ready to meet the essential networking needs of any small network & offers an extensive set of management features for a customized fit in the network. ...

The AT-9000/28 provides high performance layer 2 switching at an affordable fixed configuration platform. The switch brings advanced enterprise features to a more affordable level while supporting the changing needs of the SMB market space to improve the delivery of converged data. Support for jumbo Ethernet frames enables higher throughput of time sensitive data. Features 28 active Gigabit Ethernet ports 4 x SFP combo ports support 100 & 1000 Mbps operation fiber SFPs Near silent operation 1RU form factor, rack & wall mountable Lower power operation – eco friendly Non-blocking wirespeed Layer 2 switching Management (WEB, CLI, SNMP) Industry standard CLI interface Port mirroring Spanning Tree (STP), Rapid Spanning Tree (RSTP) support Support for 255 active VLANs from 0~4096 VID range Qo S for multimedia voice & data IEEE 802.3ad LACP Support IEEE 802.1x & RADIUS client support Double VLAN Tagging (Q-in-Q) ...

One of a series of high performance Gigabit Ethernet switches from Allied Telesis. The AT-9000/28SP provides high performance layer 2 switching at an affordable fixed configuration platform. The switch brings advanced enterprise features to a more affordable level while supporting the changing needs of the SMB market space to improve the delivery of converged data. Support for jumbo Ethernet frames enables higher throughput of time sensitive data. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

When upgrading your traditional 10 Mbps Ethernet network or extending your 100 Mbps Fast Ethernet network, switches are required, the AT-FS232 switch provides the ideal solution. The AT-FS232 will connect any two copper networks
- irrespective of speed, & allow any copper network to be extended over a Fast Ethernet fiber link up to distances of 100km. Many new backbone switch products now support the industry standard IEEE 802.1Q

Specification for VLANs (Virtual LANs), which requires extra long data packets to be sent on the network. The AT-FS232 switch has been designed to be fully compatible with these long packets, allowing them to be used in modern networks. Switches not supporting this feature will discard these extra long packets, making them unsuitable for modern networks. The switches can be used almost anywhere due to their small physical size & external power supply. Alternatively, they can be mounted in a chassis along with Allied Telesis media converters. This allows users to construct any mix of network conversions, with the additional option of a redundant power supply. The Missing Link feature allows the ports on the media converter to pass the " Link" status of their connections to each other. When the media converter detects a problem with one of the ports, such as the loss of connection to a node, it shuts down the connection to the other port, thus notifying the node that the connection has been lost. The value to this type of network monitoring & fault notification is that some hubs & switches can be configured to take a specific action in the event of the loss of connection on a port. In some cases, the unit can be configured to seek a redundant path to a disconnected end-node or send out a trap to a network management station alerting the network administrator of the problem. The Smart Missing Link mode is one step advance from the Missing Link mode. In SML mode, a downstream Link LED is forced to blink to indicate the link status of the local section is OK, but at the section where the physical link is down, the Link LED will be forced off. This special feature is useful in determining where the actual link is down & where the link is still good. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

The Allied Telesis AT-FS700 series provides powerful 10/100 switching solutions to desktop & small network environments. Each switch features full auto-negotiating 10/100 ports, which automatically detect speed & duplex modes of attached devices & allow the switch to automatically configure for the best possible performance. The AT-FS708 is supplied with 8 UTP ports for standard desktop or rack mount applications. The AT-FS700 switches are fully auto-configuring requiring minimal or no set-up by the user. The auto-negotiating ports allow seamless & simple connectivity between existing 10 Mbps Ethernet & 100 Mbps Fast Ethernet UTP devices & all units can be installed in minutes. Front panel LEDs allow users to monitor the switch status providing simple "at a glance" management. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis' Web Smart switches help network managers afford managed switches in networks where they were previously not feasible, provide management functionality at the network edge & get the most value for their dollar. With industry-standard protocols, fiber media support via SFP's, & simple plug-&-play usability right out of the box, Web Smart switches are the ideal cost-effective solution for any network. Allied Telesis' FS750 Series Web Smart Switches integrate the simplicity of unmanaged switches with the performance & reliability of managed switches to provide a cost-effective solution integrating management at the edge of the network. Web Smart switches provide key features using simple web-based management, such as: port-based VLANs, 802.1p Qo S, port trunking/link aggregation, port mirroring, priority queue's, spanning tree & 802.1x security support. With up to 8K MAC addresses & a 512K packet buffer, the FS750 Series Web Smart switches are ideal options for integrating management into your network solution. ...

Capable of providing up to 12 ports of Class 2 802.3af POE power (6 ports Class 3), the ATFS750/24POE is ideally suited for those applications using security camera, wireless access points, IP phones, or & other POE powered device. The POE options eliminates the need for power rewiring & minimizes the clutter of power supplies & adapters in awkward places. The Web Smart AT-FS750/24 features 24 10/100TX ports & 2 combo tri-speed copper / SFP ports for Gigabit connections. It is an ideal fit for the SMB / SOHO market. This switch provides managed features ideal for simple Qo S applications, & provides basic monitoring tools to improve your network. The Web Smart functions provide Qo S features suitable for multimedia applications. With the web-based interface, you can set up 802.1Q VLANs to segregate traffic, Qo S to prioritize mission-critical data such as voice or video packets, & link aggregation to create traffic pipelines. The AT-FS750/24 also provides network monitoring tools such as port mirroring & basic port statistics. Remote product management enables simple monitoring from anywhere. ...

The G8 series offers the latest industry standard in flexible, full-duplex Gigabit Ethernet connectivity. These hot-swappable, fibre interfaces simply plug into a GBIC slot on Allied Telesis GBIC compatible Layer 2 switches. The migration path to Gigabit Ethernet has never been easier. ...