About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Trend C049 X 1/4
Tungsten Carbide Self
Guided Chamfer
£19.49
Chamfer, V Groove Cutters These types of cutter are used for edging & chamfer cutting on man-made fibre boards natural timbers & plastics. Tools are offered to produce various angles for engraving chamfering & V grooving. Ball bearing & pin guided cutters enable curved work to be undertaken bearings running along the board edge or a template. Typical trade applications include sign making freehand engraving cabinet making & decorative joinery. A range of valuable self-guiding chamfer/bevel cutters. Bearing follows the board beneath. T.C.T. Shank. = 1/4 in. C = 12.7 mm. B = 9.5 mm. Angel = 45. ...
Available
Trend C058 Router Cutter 1/4 Shank Tc
Trend C058 Router
Cutter 1/4 Shank Tc
£20.50
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes & board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig. D=1 inch. D=25.4 mm. Cut length=5/8 inch. Cut length=15.9 mm. Overall length=56.5 mm. R=12.7 mm. Shank Diameter=1/4 inch. ...
Available
Trend C079 Router Cutter 1/4 Shank Tc
Trend C079 Router
Cutter 1/4 Shank Tc
£28.00
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D=38.0 mm. Cut length=3/4 inch. Cut length=19.1 mm. B=9.5 mm. B2=12.7 mm. R=1/2 inch. R=12.7 mm. Shank Diameter=1/4 inch. ...
Available
image missing
Trend C145 X 1/4
Tungsten Carbide
Slotting Cutter 6.3mm
£17.99
This two wing slotting cutter is ideal for grooving & rebating operations. A 1/2 in diameter bearing is supplied with every cutter. Depth of cut can be changed by purchasing alternative bearing sizes. T.C.T. Shank = 1/4 in. C = 6.3 mm. (Slots) Depth with standard cutter = 3/8 in. ...
Available
Trend C152 X 1/2 Tungsten Carbide Biscuit Joiner Set
Trend C152 X 1/2
Tungsten Carbide
Biscuit Joiner Set
£26.50
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Supplied with instructions. No. 0
- 45 mm. x 15 mm. x 4 mm. Suitable for 8-12 mm. boards Use bearing B19A 9.05 mm. depth. No. 10
- 53 mm. x 19 mm. x 4 mm. Suitable for 13-18 mm. boards Use bearing B16A 10.6 mm. depth. No. 20
- 58 mm. x 23 mm. x 4 mm. Suitable for 19 mm. +- board Use bearing B127AD1 37.2 mm. Cut length 4 mm. B 12.7 mm. B2 16.0 mm. B3 19.0 mm. Shank = 1/2 in.


...
Available
Trend C172x1/2tc Straight Cutter 1/2 Tct
Trend C172x 1/2tc
Straight Cutter 1/2
Tct
£17.99
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=15/32 inch. D=12 mm. Cut length=2 1/2 inches. Cut length=63 mm. Shank Diameter=1/2 inch. ...
Available
Trend C193x1/2tc Router Cutter 1/2 Tc
Trend C193x 1/2tc
Router Cutter 1/2 Tc
£23.99
These cutters are self-guiding & can be used to produce rebates, lap joints, tongues & rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. D=31.8 mm. Cut length=15.9 =12.7 &9.5 mm. E=9.5 mm. E2=11.1 mm. Shank Diameter=1/2 inch. ...
Available
Trend C198x1/2tc Router Cutter 1/2 Tc
Trend C198x 1/2tc
Router Cutter 1/2 Tc
£24.50
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D=44.5 mm. Cut length=22 mm. B=9.5 mm. B2=12.7 mm. R=5/8 inch. R=16 mm. Shank Diameter=1/2 inch. ...
Available
Trend C206x1/2tc Router Cutter 1/2 Tc
Trend C206x 1/2tc
Router Cutter 1/2 Tc
£38.99
Recessing cutter will accommodate the Schlegel Aquamac 63 weather strip system & allows for a particularly small gap between sash & frame. The slot can be positioned part way down the side of the rebate, or at the bottom of the rebate. D=41.3 mm. D2=28.3 mm. C=4.8 mm. C2=2.7 mm. Overall length=67 mm. B=22 mm. Shank Diameter=1/2 inch. ...
Available
Trend C208x1/2tc Router Cutter 1/2 Tc
Trend C208x 1/2tc
Router Cutter 1/2 Tc
£29.99
For either frame or door applications, with standard Intumescent Strip. Neatly cuts grooves on doors or frames to accept Intumescent Strip which enables the formation of effective barriers to both fire & smoke. By using alternative ball bearings diameters other seal thicknesses can be introduced. Alternative bearings can be purchased to suit other thicknesses. For 4.0 mm. thick & 10.0 mm. width intumescent strip. D= 40 mm. C= 10 mm. B= 32 mm. E= 4 mm. Shank Diameter= 1/2 inch. ...
Available

Trend C152 X 1/4 Tungsten Carbide Biscuit Jointer Set

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Supplied with instructions. No. 0 - 45 mm. x 15 mm. x 4 mm. Suitable for 8-12 mm. boards Use bearing B19A 9.05 mm. depth. No. 10 - 53 mm. x 19 mm. x 4 mm. Suitable for 13-18 mm. boards Use bearing B16A 10.6 mm. depth. No. 20 - 58 mm. x 23 mm. x 4 mm. Suitable for 19 mm. +- board Use bearing B127AD1 37.2 mm. Cut length 4 mm. B 12.7 mm. B2 16.0 mm. B3 19.0 mm. Shank = 1/4 in.
Buy
Availability: In Stock
£26.50
computer components DEFAULT
Description Reviews / Comments Add New

Product Description

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Supplied with instructions. No. 0
- 45 mm. x 15 mm. x 4 mm. Suitable for 8-12 mm. boards Use bearing B19A 9.05 mm. depth. No. 10
- 53 mm. x 19 mm. x 4 mm. Suitable for 13-18 mm. boards Use bearing B16A 10.6 mm. depth. No. 20
- 58 mm. x 23 mm. x 4 mm. Suitable for 19 mm. +- board Use bearing B127AD1 37.2 mm. Cut length 4 mm. B 12.7 mm. B2 16.0 mm. B3 19.0 mm. Shank = 1/4 in.

Reviews/Comments

Add New

Intelligent Comparison

Available
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter Ebuyer Business
£22.49
Available
Trend 12/6 X 1/4 Tungsten Carbide Radius Cutter
Trend 12/6 X 1/4 Tungsten Carbide Radius Cutter Ebuyer Business
£29.99
Available
Trend 13/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 13/3 X 1/4 Tungsten Carbide Radius Cutter Ebuyer Business
£38.00
Available
Trend 31/2 X 1/4 Tungsten Carbide Dovetail Cutter
Trend 31/2 X 1/4 Tungsten Carbide Dovetail Cutter Ebuyer Business
£19.49
Available
Trend 31/02 X 1/4 Tungsten Carbide Dovetail Cutter
Trend 31/02 X 1/4 Tungsten Carbide Dovetail Cutter Ebuyer Business
£23.00
Available
Trend 46/92 X 1/4 Tungsten Carbide Guided Profiler
Trend 46/92 X 1/4 Tungsten Carbide Guided Profiler Ebuyer Business
£26.50
Available
Trend 46/39 X 1/4 Tungsten Carbide Rebate Set
Trend 46/39 X 1/4 Tungsten Carbide Rebate Set Ebuyer Business
£43.49
Available
Trend 13/30 X 1/2 Tungsten Carbide Radius Cutter
Trend 13/30 X 1/2 Tungsten Carbide Radius Cutter Ebuyer Business
£40.49

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Instructions - An informative direction to take.
Assembly - A gathering of people for a purpose e.g. a school assembly
Assembly - A gathering of people all together for the same purpose.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Ebuyer Business
Get ready to power up your tech game with Ebuyer (https://www.ebuyer.com/)! Explore a vast selection of the latest gadgets, electronics, and computing essentials at unbeatable prices. From cutting-edge laptops and gaming PCs to home appliances and office supplies, we've got everything you need to stay connected and productive. With fast delivery and top-notch customer service, Ebuyer is your go-to destination for all things tech. Don't settle for less – shop now and take your tech game to the next level with Ebuyer!
Page Updated: 2024-02-28 09:26:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu