Equipped with features like programmable, silent membrane switches, logic inputs & outputs, & LED indicators, Microflex Boundary Microphones are the high-quality solution for a range of applications such as altars, boardrooms & distance learning centers. Every Microflex Boundary microphone features a choice of interchangeable condenser cartridges. MX391:

Includes:: attached 4 meter (12 ft) cable terminated with a 4-pin mini connector & separate preamplifier. A rubber strain relief is provided for applications that require removing the 4-pin mini connector & connecting the mic cable directly to screw terminals in the preamplifier. Flat frequency response across the vocal range for uncolored sound Interchangeable cardioid, supercardioid, & omnidirectional cartridges that provide optimal choice for each application Sleek, low-profile design for unobtrusive appearance Balanced, transformerless output for increased immunity to noise over long cable runs Programmable on/off switch & LED on/off indicator (MX392/MX393 models only) LED logic input & switch logic output terminals for remote control or use with automatic mixers (MX392 models only) Frequency Response
- 50 to 17, 000 Hz (Preamp Only) lmpedance
- 180 ohms actual (rated at 150 ohms) (Preamp Only) Output Level
- -6 d BV (0.5 V), 12 d B at 0 gain (Preamp Only) Phantom power required?
- 11 to 52 Vdc phantom, 2.0 m A current consumption (Preamp Only)





...

92m operating range Multi-color LED indicating power, lockout, mute & low battery 90 selectable UHF frequencies that operate on an 18 M Hz UHF bandwidth Diversity Reception system uses twin receiver circuits to minimise noise & drop out caused by RF interference Use up to 9 systems simultaneousy within the 846
- 865 Mhz range 8+ Hour Battery Life PGX4 has has XLR & unbalanced 1/4 inch jack audio outputs PGX1

Includes:: mute switch & battery power warning lights Carrying case included


...

What is the SRH440 best suited to? The SRH440 Headphones are ideal for recording & monitoring in your home studio. The impedance, power handling & sensitivity have all been optimized for performance with professional audio devices such as mixing consoles, dj mixers & headphone amplifiers. What are the features? It has a closed-back, circumaural design that rests comfortably over the ears which reduces background noise. The adjustable headband & collapsible construction provides extra comfort & portability. It has an enhanced frequency response to deliver accurate audio across an extended range. Enhanced frequency response delivers accurate audio across an extended range Impedance & power handling optimized for performance with professional audio devices Adjustable headband & collapsible construction provide comfort & portability Bayonet clip securely locks detachable cable into ear cup ...

The SLX4 wireless receiver offers unprecedented simplicity with features including Automatic Frequency Selection & Automatic Transmitter Setup. With included rack hardware & detachable antennas, it is ready for immediate installation right out of the box. Other features include a backlit LCD screen which provides group, channel & antenna information. A five segment audio meter lets you monitor the incoming audio signal from the transmitter. The SLX4 receiver is used as part of the SLX wireless series which

Includes:: various handheld, headset & lapel mic options. Automatic Frequency Selection Automatic Transmitter Setup Detachable 1/4 wave antennas Microprocessor-controlled diversity Multi-function, backlit LCD Rugged metal chassis 1/2 rack design Power supply: PS21UK Battery status: Yes Further specs: Dimensions: 42 mm H x 197 mm W x 134 mm D Weight: 816 g Housing: Galvanized steel Audio Output Level: XLR connector (into 600 & Omega; load): –13 d BV, 1/4 inch connector (into 3000 & Omega; load): –2 d BV Output Impedance: XLR connector: 200 & Omega;, 1/4 inch connector: 1k& Omega; Sensitivity: -105 d Bm for 12 d B SINAD, typical Image Rejection: >70 d B, typical Operating Range Under Typical Conditions: 100m (300 ft.) Audio Frequency Response (+/– 2 d B): Minimum: 45 Hz, Maximum: 15 k Hz

...

The SRH750DJ Headphones from Shure deliver world-class audio performance, comfort, & durability to professional DJ’s. High impedance & maximized power handling optimize the headphones for use on high-output DJ mixers. Comfortable, padded ear cups swivel 90 degrees & allow easy placement on one ear when mixing. Replaceable cable & included set of replacement ear pads ensure a long product life. High impedance & maximized power handling for DJ mixers Enhanced frequency response tuned to deliver high-output bass with extended highs Closed-back, circumaural design rests comfortably over the ears & reduces background noise Adjustable, collapsible headband with 90-degree swivel ear cups for comfort & easy one-ear placement Legendary Shure quality to withstand the rigors of everyday use Bayonet Clip securely locks cable into ear cup Replaceable ear cup pads ensure long product life 3m (10ft) coiled detachable cable provides plenty of length & easy storage Carrying bag protects headphones when on the go or not in use Specifications Transducer type
- Dynamic neodymium magnet Driver size
- 50 mm Sensitivity (1k Hz)
- 106 d B/m W Impedance (1k Hz)
- 32 & Omega; Max. input Power
- 3000 m W Frequency range
- 5 Hz
- 30 k Hz Net weight (without cable)
- 8 oz. (227 g) Shipping weight
- 24.8 oz. (703 g) Length of cable
- 3 meters (9.84 ft) Type of cable
- Detachable coiled oxygen-free copper Plug
- Gold-plated 1/8" (3.5 mm) stereo mini jack











...

Shuttle (40W) Power Adaptor for Shuttle X50 V2 All-in-One PC. Compliance Certifications Safety/EMI: Compliance & Logos: CE, WEEE & others Electrical Power Adaptor Type AC Mains Voltage 100 V AC to 240 V AC Output Voltage 19 V DC to Power 40 W Environmental Environmental Operating Temperature 5 to 35 °C
- Humidity 10 to 90 % Physical Form Factor Power Adaptor Case Colour Black In The Box AC power adaptor (40W) with cable & DC output plug • AC power cord with Europlug • Quick guide

Dimensions 3.7 cm (W) x 8.95 cm (D) x 2.65 cm (H)
- Weight



...

The Shuttle XPC accessory PC60 is the version of Shuttle SFF power supply with compatibility of 300W. Power supply offers easy AC to DC switching. With low noise figure of 30d B, it fits in any noise-sensitive environment like library & office. With an 80 PLUS efficient power supply standard, ENERGY STAR qualified configurations, PC60 proves itself a saving in power consumption & energy costs. This PSU is compatible with the below Shuttle models: SG33G5M SG33G5 SG31G2 SN68SG2 SA76G2 ...

Its hard to find a mightier or more impressive RC Offroader! The Shuttle Galaxy immense pneumatic tyres & chrome rims combine perfectly with an extremely high car body to ensure you. re the centre of attention. The initial enthusiastic stares are further boosted by the amazing technology on board. A fascinating driving experience for every owner is secured by the special Wheely Function. Your Offroader can easily be pointed up to the sky & driven spectacularly on its rear wheels. ...

Shuttle Mini PC with Heatpipe cooling for LG1150 The Shuttle XPC Barebone SH87R6 packs the 4th Generation of Intel Core desktop processors for LGA1150 socket into an elegant, fresh case design. The aluminium chassis with a black-brushed surface has a volume of 14 litre which is just one third of the volume of a standard Midi tower. Despite its small

Dimensions it is brimming with features. Set up a top-performer with the latest Intel Core i 7 Quad Core processor, a dual-slot PCI Express graphics card, m SATA-SSD, two 4 TB hard disks in RAID mode & 32 GB DDR3-1600 memory plus Blu-ray drive. Contrary, also costeffective configurations without dedicated graphics card are possible, since Intel's Haswell generation offers an amazing CPU & graphics performance with low energy consumption. Convince yourself of the versatility & stylish exterior of this Shuttle XPC The R6 chassis design: a clean & modern look R6 is the new chassis design for the middle / high-end series XPCs in 2013. Shuttle has always placed great emphasis on the interior & exterior aesthetics of the XPC, with the belief that a good blend of style & form factor will enable the XPC to be attractive, versatile, & work well in almost any environment. The chassis & case cover are made from aluminium & come with a sleek brushed metal front fascia. The drives & front panel connectors are elegantly hidden by drive doors for superior style & visual appeal. Small, but easy to install Shuttle XPCs offer the performance of a desktop PC at a third of the size while using standard desktop components. Shuttle keeps the concept of being "futureproof" in mind when designing the new R6 chassis. The meticulously designed internal layout features pre-routed cables to reduce clutter, increase airflow & make the installation of components easy. What is a Barebone? The Shuttle XPC Barebone SH87R6 consists of a stylish case with preinstalled mainboard, power supply unit (PSU) & cables. Despite its small form factor, it offers outstanding connectivity, functionality & performance. For a full PC system, a processor, memory, hard disk & operating system need to be added. Shuttle XPC Barebones are completely customisable meaning users can pick certain components on their own to ideally match their individual needs. Supports Intel 22nm Haswell Processors Haswell is the codename for Intel's 4th Generation of Intel Core Processors introduced in June 2013 along with the 8-series chipsets. The Shuttle XPC Barebone SH87R6 supports Intel desktop processors for socket LGA1150, while the previous generation (LGA1155) isnot compatible. One monolithic die incorporates up to four CPU cores, the shared L3 cache, the memory controller, PCIe links, the graphics processor & now also the integrated voltage regulator (IVR). The 4th generation of Intel Core processors brings the highest performance currently available in mainstream computing with the additional benefit of superior graphics support. It provides a better branch prediction, a doubling of the bandwidth of both the L1 & the L2 caches, & integrates a new generation integrated HD graphics circuitry with a new level of performance for 3D games & HD media playback. XPC Barebone SH87R6 Specifications R6-Chassis Black aluminium chassis Front panel: glossy plastic with horizontal line texture Storage bays: 1 x 5.25" (external), 2 x 3.5" (1x internal, 1x external) With the optional accessory PHD3 two 2.5" drives can be installed into one 3.5" bay. Front doors for I/O ports & storage drives Kensington Security Slot at the back panel (also called K-Slot or Kensington lock) as a part of an anti-theft system Dimensions: 33.2 x 21, 6 x 19.8 cm (LWH), 14.2 litres Weight: 3.5kg net / 5.0kg gross Mainboard & Chipset Shuttle "FH87/FZ87", Shuttle form factor proprietary design for XPCs SH87R6/SZ87R6 Dimensions: 270 x 195 mm Chipset/ Southbridge: Intel H87 (codename: Lynx Point) Chipset stepping is C2 or higher. Platform Controller Hub (PCH) as Single-Chip-Solution Passive chipset cooling with heat sink The Northbridge is integrated into the processor. Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability BIOS AMI BIOS, SPI Interface, 32 MBit Flash-ROM with SPI interface Supports Pn P, ACPI 3.0, Hardware Monitoring Supports Unified Extensible Firmware Interface (UEFI) [3] Supports boot up from external USB (Universal Serial Bus) flash memory Power Supply Built in 300 Watt mini switching power supply AC input voltage: supports 100~240V, 50~60 Hz 80PLUS Bronze compliant: the PSU provides at least 82/85/82% of efficiency at 20/50/100% of load. Active PFC circuit (Power Factor Correction) ATX main power connectors: 2x 10 & 2x 2 pins Graphics power connector: 6 pins Other connectors: 4x SATA, 2x Molex, 1x Floppy Operation System This system comes without operating system. It is compatible with Windows 8, Windows 7 und Linux Processor Support Socket LGA 1150 (H3) supports the fourth generation of Intel Core i 3 / i 5 / i 7 & Pentium processors Maximum supported processor power consumption (TDP) = 95W Codename " Haswell", 22nm process technology, up to 8 MB of L3 cache Not compatible with older Socket LGA 1155 processors. Does not support the unlock-function of Intel K-Series processors. The Processor integrates PCI-Express, memory controller & the graphics engine on the same die (depends on processor type) Please refer to the support list for detailed processor support information.

...

NAS server for small offices, workgroups or home use, initial setup made really easy. Fits easily in nearly any environment Ultra-quiet operation, almost fanless Always enough space for large amounts of data Integrated card reader for many SD memory cards Suitable for data media with USB (Universal Serial Bus) 3.0 connection Integrated media server CPU Processor (L1 Cache) (L2 Cache) (L3 Cache) (L4 Cache) Storage Maximum Enclosure Capacity Total Bay Capacity / (SATA) / (SAS) & Number of Bays Hard Disk (x ) Solid State Drive (x ) Media Adaptor Card Types Supported SD • SDHC Interfaces/ Ports RJ-45 Ports 1 x RJ-45 USB (Universal Serial Bus) Ports 1 x USB (Universal Serial Bus) 3.0 • 2 x USB (Universal Serial Bus) 2.0 System Operating System Embedded Linux System Requirements Operating Systems Supported Workstation OS: MS Windows XP SP3, Mac OS X 10.4, Apple Safari 3.0, Linux kernel 2.6.x or later System Requirements Smart phone OS: i OS 4.2, Android 2.3 or later • Browser: MS Internet Explorer 7.0, Firefox 3.x, Google Chrome, Apple Safari 3.0 or later • Router for Internet connection Electrical Power Adaptor Output 19 VDC Voltage/ Power/ Frequency 100 to 240 V AC / 15.5 W / 50 to 60 Hz Environmental Environmental Operating Temperature 5 to 35 °C
- Humidity Physical Form Factor Tower Case Colour White Pack Quantity 1 In The Box Shuttle OMNINAS KD20 2 Bay Network Attached Storage • Quick Installation Guide • AC Power adaptor (65 W) with AC power cord (plug depends on region) • Ethernet cable, ca. 150 cm • Driver CDROM with NAS finder software & documentation • Screws for hard disk installation

Dimensions 9 cm (W) x 22.5 cm (D) x 17 cm (H)
- Weight 2.2kg LED Status Indicators Status LED: dual colour (access/error: blue/red) • HDD1/HDD2 LEDs: dual colour (access/error: blue/red) • USB (Universal Serial Bus) 3.0 LED: single colour (access: blue) • Card reader LED: single colour (access: blue) • LAN speed LED (10/100 Mbps: green, 1000 Mbps: orange) • LAN Activity LED (access/link: blinking green)



...