Hassle free setup Internal antennas simplify operation & storage Only one channel select button A seven-segment LED indicated instantly if the selected channel is occupied Reliable wireless technology Microprocessor controlled Predictive Diversity System technical specifications Compatible systems per frequency band (up to): 4 Selectable frequencies: 10 Auto Setup

Features: No Audio Reference Companding: No Included Antennas: Internal 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: Optional System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 9V, >8 h Environment: Small to medium stages Further Technical Specs PG4 Receiver Output Impedance XLR connector: 200 & Ugrave; 1/4 inch connector: 1k& Ugrave; Audio Output Level Ref. +/– 33 k Hz deviation with 1 k Hz tone XLR connector (into 100K & Ugrave; load): –19 d BV, typical 1/4 inch connector (into 100K & Ugrave; load): –5 d BV, typical Sensitivity –105 d Bm for 12 d B SINAD, typical Image Rejection >50 d B, typical

Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)

Dimensions
- PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.) Weight 241 grams (8.5 oz) Weight
- PG88 429 grams (15.1 oz) Housing Molded ABS Power Requirements 12–18 Vdc at 160 m A (PG4), 320m A (PG88), supplied by external power supply PG1 Bodypack Transmitter Audio Input Level -10 d BV maximum at "mic" gain position +10 d BV maximum at 0d B gain position +20 d BV maximum at -10d B gain position Gain Adjustment Range 30 d B Input Impedance 1m& Ugrave; RF Transmitter Output 10 m W typical (dependent on applicable country regulations)

Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.) Weight 75 grams (2.6 oz.) without battery Housing Molded ABS Power Requirements One 9V alkaline or rechargeable battery Battery Life Up to 8 hours (alkaline)









...

Shuttle (40W) Power Adaptor for Shuttle X50 V2 All-in-One PC. Compliance Certifications Safety/EMI: Compliance & Logos: CE, WEEE & others Electrical Power Adaptor Type AC Mains Voltage 100 V AC to 240 V AC Output Voltage 19 V DC to Power 40 W Environmental Environmental Operating Temperature 5 to 35 °C
- Humidity 10 to 90 % Physical Form Factor Power Adaptor Case Colour Black In The Box AC power adaptor (40W) with cable & DC output plug • AC power cord with Europlug • Quick guide

Dimensions 3.7 cm (W) x 8.95 cm (D) x 2.65 cm (H)
- Weight



...

The Shuttle XPC accessory PC60 is the version of Shuttle SFF power supply with compatibility of 300W. Power supply offers easy AC to DC switching. With low noise figure of 30d B, it fits in any noise-sensitive environment like library & office. With an 80 PLUS efficient power supply standard, ENERGY STAR qualified configurations, PC60 proves itself a saving in power consumption & energy costs. This PSU is compatible with the below Shuttle models: SG33G5M SG33G5 SG31G2 SN68SG2 SA76G2 ...

Its hard to find a mightier or more impressive RC Offroader! The Shuttle Galaxy immense pneumatic tyres & chrome rims combine perfectly with an extremely high car body to ensure you. re the centre of attention. The initial enthusiastic stares are further boosted by the amazing technology on board. A fascinating driving experience for every owner is secured by the special Wheely Function. Your Offroader can easily be pointed up to the sky & driven spectacularly on its rear wheels. ...

Shuttle Mini PC with Heatpipe cooling for LG1150 The Shuttle XPC Barebone SH87R6 packs the 4th Generation of Intel Core desktop processors for LGA1150 socket into an elegant, fresh case design. The aluminium chassis with a black-brushed surface has a volume of 14 litre which is just one third of the volume of a standard Midi tower. Despite its small

Dimensions it is brimming with features. Set up a top-performer with the latest Intel Core i 7 Quad Core processor, a dual-slot PCI Express graphics card, m SATA-SSD, two 4 TB hard disks in RAID mode & 32 GB DDR3-1600 memory plus Blu-ray drive. Contrary, also costeffective configurations without dedicated graphics card are possible, since Intel's Haswell generation offers an amazing CPU & graphics performance with low energy consumption. Convince yourself of the versatility & stylish exterior of this Shuttle XPC The R6 chassis design: a clean & modern look R6 is the new chassis design for the middle / high-end series XPCs in 2013. Shuttle has always placed great emphasis on the interior & exterior aesthetics of the XPC, with the belief that a good blend of style & form factor will enable the XPC to be attractive, versatile, & work well in almost any environment. The chassis & case cover are made from aluminium & come with a sleek brushed metal front fascia. The drives & front panel connectors are elegantly hidden by drive doors for superior style & visual appeal. Small, but easy to install Shuttle XPCs offer the performance of a desktop PC at a third of the size while using standard desktop components. Shuttle keeps the concept of being "futureproof" in mind when designing the new R6 chassis. The meticulously designed internal layout features pre-routed cables to reduce clutter, increase airflow & make the installation of components easy. What is a Barebone? The Shuttle XPC Barebone SH87R6 consists of a stylish case with preinstalled mainboard, power supply unit (PSU) & cables. Despite its small form factor, it offers outstanding connectivity, functionality & performance. For a full PC system, a processor, memory, hard disk & operating system need to be added. Shuttle XPC Barebones are completely customisable meaning users can pick certain components on their own to ideally match their individual needs. Supports Intel 22nm Haswell Processors Haswell is the codename for Intel's 4th Generation of Intel Core Processors introduced in June 2013 along with the 8-series chipsets. The Shuttle XPC Barebone SH87R6 supports Intel desktop processors for socket LGA1150, while the previous generation (LGA1155) isnot compatible. One monolithic die incorporates up to four CPU cores, the shared L3 cache, the memory controller, PCIe links, the graphics processor & now also the integrated voltage regulator (IVR). The 4th generation of Intel Core processors brings the highest performance currently available in mainstream computing with the additional benefit of superior graphics support. It provides a better branch prediction, a doubling of the bandwidth of both the L1 & the L2 caches, & integrates a new generation integrated HD graphics circuitry with a new level of performance for 3D games & HD media playback. XPC Barebone SH87R6 Specifications R6-Chassis Black aluminium chassis Front panel: glossy plastic with horizontal line texture Storage bays: 1 x 5.25" (external), 2 x 3.5" (1x internal, 1x external) With the optional accessory PHD3 two 2.5" drives can be installed into one 3.5" bay. Front doors for I/O ports & storage drives Kensington Security Slot at the back panel (also called K-Slot or Kensington lock) as a part of an anti-theft system Dimensions: 33.2 x 21, 6 x 19.8 cm (LWH), 14.2 litres Weight: 3.5kg net / 5.0kg gross Mainboard & Chipset Shuttle "FH87/FZ87", Shuttle form factor proprietary design for XPCs SH87R6/SZ87R6 Dimensions: 270 x 195 mm Chipset/ Southbridge: Intel H87 (codename: Lynx Point) Chipset stepping is C2 or higher. Platform Controller Hub (PCH) as Single-Chip-Solution Passive chipset cooling with heat sink The Northbridge is integrated into the processor. Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability BIOS AMI BIOS, SPI Interface, 32 MBit Flash-ROM with SPI interface Supports Pn P, ACPI 3.0, Hardware Monitoring Supports Unified Extensible Firmware Interface (UEFI) [3] Supports boot up from external USB (Universal Serial Bus) flash memory Power Supply Built in 300 Watt mini switching power supply AC input voltage: supports 100~240V, 50~60 Hz 80PLUS Bronze compliant: the PSU provides at least 82/85/82% of efficiency at 20/50/100% of load. Active PFC circuit (Power Factor Correction) ATX main power connectors: 2x 10 & 2x 2 pins Graphics power connector: 6 pins Other connectors: 4x SATA, 2x Molex, 1x Floppy Operation System This system comes without operating system. It is compatible with Windows 8, Windows 7 und Linux Processor Support Socket LGA 1150 (H3) supports the fourth generation of Intel Core i 3 / i 5 / i 7 & Pentium processors Maximum supported processor power consumption (TDP) = 95W Codename " Haswell", 22nm process technology, up to 8 MB of L3 cache Not compatible with older Socket LGA 1155 processors. Does not support the unlock-function of Intel K-Series processors. The Processor integrates PCI-Express, memory controller & the graphics engine on the same die (depends on processor type) Please refer to the support list for detailed processor support information.

...

The Shuttle OMNINAS KD22 is a two-bay network-attached storage (NAS) which is designed to become your hub of multimedia content
-
...

The Shuttle OMNINAS KS10 is a one-bay network attached-storage designed for personal cloud, home & SOHO use. In addition to Gigabit LAN, the KS10 features built-in IEEE 802.11 b/g/n wireless network & supports AP mode. With a screw-free design, the hard drive is easy to install. The KS10 not only has strong data storage & backup capacities but it also supports multiple server functions, BT download. Fanless & low-power consumption design ensures the KS10 is passively cooled & quiet for long-term operation. ...

Efficient 300W Power Supply Shuttle XPCs SG41J1/J4, SH61R4 & SH55J2 The Shuttle XPC Accessory PC61J is a new high-end power supply with a maximum output wattage of 300W suitable for the Shuttle XPCs SG41J1/J4 series, SH55J2 & SH61R4. With a low noise level, it is ideal to be used in any noise-sensitive environments such as a library & offices. Thanks to its 80 PLUS Bronze certification for power-efficient devices, this power supply is also suitable for ENERGY STAR compliant systems. Benefit from less power consumption & less energy costs using PC61J. Model: Shuttle XPC Accessory PC61J (power supply) Output wattage: Total combined output is 300W max. Total combined output of 3.3V & 5V is 80W max. Active PFC circuit (Power Factor Correction) Input Voltage/ Frequency range: 100~240V AC, 50/60 Hz Input current: max. 6A/3A for 115V/230V AC during normal operating Inrush current: 60A/90A for 115V/230V AC DC voltage output, max. output current: +12V1: 16A +12V2: 16A +3.3V: 12A +5V: 15A +5VSB: 2A (Standby) -12V: 0.3A Power Connectors: 1x ATX power with 20 pins 1x ATX 12V power with 4 pins 1x PCIe power with 6 pins (for graphics card power) 3x Serial ATA power 2x Molex power 1x Floppy power Protection: Short circuit protection (SCP)
- Latch off Overpower (overload) protection (OPP) Overcurrent protection (OCP) Overtemperature protection (OTP) Overvoltage protection (OVP) Undervoltage protection (UVP) Efficiency: 80PLUS Bronze compliant The PSU provides at least 82/85/82% efficiency at 20/50/100% load. Certification: EMI/RFI: FCC class B, CE, BSMI, CCC Safety: c UL, Tu V type approved, CB, BSMI, CCC Timing, housekeeping & control conform Intel ATX12V Specific Guidelines 2.3 Mean Time Between Failures (MTBF) > 100.000 hours at 75% load, 25°C Temperature: Operating temperature: +10°C ~ +50°C Storage temperature: -40°C ~ +70°C Cooling fan: 50mm ball bearing fan with thermal Fan-speed control Dimensions: 200 x 82 x 53 mm (LWH) Scope of delivery: power supply & 4 screws Weight: net weight: 1.1 kg, gross weight: 1.2kg
...

The Shuttle XPC accessory PC63J is a high-end power supply with maximum output wattage of 500W suitable for XPCs with J-series case. With a low noise level of only 30d B, it is ideal to be used in any noise-sensitive environments such as a library & offices. Thanks to its 80 PLUS Bronze certification for power-efficient devices, this power supply is also suitable for Energy Star compliant systems. Benefit from less power consumption & less energy costs using PC63J. ...

PV02 VESA mount accessory PV02 for XG41 & XH61 series Slim PCs Its optional VESA75/100 wallmount allows the Shuttle Slim-PC XG41 & XH61 to be installed on to walls or just affixed on the rear side of a monitor which is particularly interesting for the industry segment, company buildings & public institutions. ...