These fans have been specifically developed to deliver significant airflow while maintaining low noise levels. All Silent series R2 fans are equipped with high performance hydraulic bearings, increasing both fan performance & reliability. The cable on each Silent series R2 fan is fully sleeved for effortless cable routing & enhanced aesthetics. ...

Fractal Design Tesla R2 Series power supply units provide clean power efficiently & quietly. The Tesla R2 is an excellent choice for demanding high-end gaming computers & powerful workstations. The visual appearance of Tesla R2 Series PSUs is proof of Fractal Design’s commitment to providing innovative computer components infused with stylish, elegant, contemporary Scandinavian design. The key features 80PLUS Gold Single, powerful 12V rail SLI (650W & up) & Cross Fire X Certified Long-life ball-bearing fan 80 PLUS Gold certified efficiency Tesla R2 Series PSUs meet the 80 PLUS Gold

Specification for providing power with an efficiency that surpasses most power supplies available today. This efficiency produces positive environmental impact, as well as reduces electricity bills. in addition, because Tesla R2 PSUs generate less heat, they provide power at lower fan speeds, which results in reduced noise levels. Excellent electrical performance Tesla R2 Series PSUs feature excellent DC voltage regulation & ripple suppression; they can deliver their full-rated wattage continuously even with an intake temperature as high as 40°C (80% of maximum load at 50°C). SLI & Cross Fire X support Tesla R2 Series PSUs (650W & up) are tested & certified compatible with the latest graphics cards. Compliant with the latest standard Tesla R2 Series PSUs is compliant with the latest PC PSU standard: ATX12V 2.31. Silent, temperature-controlled 135mm fan Generally, larger fans move more air with less noise than smaller fans: Tesla R2 Series PSUs are equipped with a large, low-speed, 135 mm fan, which keeps noise level down. Single powerful 12V rail To provide maximum support for modern components, Tesla R2 Series PSUs deliver their full power from a single 12V rail. Extra-Long ATX12V cable Tesla R2 Series PSUs are equipped with a 700mm long 12V ("P4") connector cable, which accommodates bottom-mounted-PSU computer cases. Long-life Ball-bearing fan Tesla R2 Series PSUs are equipped with ball-bearing fans, which provide the longest expected fan life available on the market. General specifications Wattage range
- 500-1000W 80PLUS Certification
- Gold Modular cables
- No Fan type
- 135mm ball-bearing Maximum operating temperature at full load
- 40°C Semi-passive operation
- No Capacitors
- Taiwanese Colors Available
- Black, White Case

Dimensions
- W x H x D (mm)
- 150 x 86 x 165 Life expectancy (MTBF)
- 100, 000 hours at full load PSU

Specification compliance
- ATX 2.31 Package

Dimensions
- W x H x D (mm)
- 105 x 295 x 245 (800-1000W) Warranty
- 3 Years






















...

Fractal Design Tesla R2 Series power supply units provide clean power efficiently & quietly. The Tesla R2 is an excellent choice for demanding high-end gaming computers & powerful workstations. The visual appearance of Tesla R2 Series PSUs is proof of Fractal Design’s commitment to providing innovative computer components infused with stylish, elegant, contemporary Scandinavian design. The key features 80PLUS Gold Single, powerful 12V rail SLI (650W & up) & Cross Fire X Certified Long-life ball-bearing fan 80 PLUS Gold certified efficiency Tesla R2 Series PSUs meet the 80 PLUS Gold

Specification for providing power with an efficiency that surpasses most power supplies available today. This efficiency produces positive environmental impact, as well as reduces electricity bills. in addition, because Tesla R2 PSUs generate less heat, they provide power at lower fan speeds, which results in reduced noise levels. Excellent electrical performance Tesla R2 Series PSUs feature excellent DC voltage regulation & ripple suppression; they can deliver their full-rated wattage continuously even with an intake temperature as high as 40°C (80% of maximum load at 50°C). SLI & Cross Fire X support Tesla R2 Series PSUs (650W & up) are tested & certified compatible with the latest graphics cards. Compliant with the latest standard Tesla R2 Series PSUs is compliant with the latest PC PSU standard: ATX12V 2.31. Silent, temperature-controlled 135mm fan Generally, larger fans move more air with less noise than smaller fans: Tesla R2 Series PSUs are equipped with a large, low-speed, 135 mm fan, which keeps noise level down. Single powerful 12V rail To provide maximum support for modern components, Tesla R2 Series PSUs deliver their full power from a single 12V rail. Extra-Long ATX12V cable Tesla R2 Series PSUs are equipped with a 700mm long 12V ("P4") connector cable, which accommodates bottom-mounted-PSU computer cases. Long-life Ball-bearing fan Tesla R2 Series PSUs are equipped with ball-bearing fans, which provide the longest expected fan life available on the market. General specifications Wattage range
- 500-1000W 80PLUS Certification
- Gold Modular cables
- No Fan type
- 135mm ball-bearing Maximum operating temperature at full load
- 40°C Semi-passive operation
- No Capacitors
- Taiwanese Colors Available
- Black, White Case

Dimensions
- W x H x D (mm)
- 150 x 86 x 165 Life expectancy (MTBF)
- 100, 000 hours at full load PSU

Specification compliance
- ATX 2.31 Package

Dimensions
- W x H x D (mm)
- 105 x 260 x 225 Warranty
- 3 Years






















...

Fractal Design Tesla R2 Series power supply units provide clean power efficiently & quietly. The Tesla R2 is an excellent choice for demanding high-end gaming computers & powerful workstations. The visual appearance of Tesla R2 Series PSUs is proof of Fractal Design’s commitment to providing innovative computer components infused with stylish, elegant, contemporary Scandinavian design. The key features 80PLUS Gold Single, powerful 12V rail SLI (650W & up) & Cross Fire X Certified Long-life ball-bearing fan 80 PLUS Gold certified efficiency Tesla R2 Series PSUs meet the 80 PLUS Gold

Specification for providing power with an efficiency that surpasses most power supplies available today. This efficiency produces positive environmental impact, as well as reduces electricity bills. in addition, because Tesla R2 PSUs generate less heat, they provide power at lower fan speeds, which results in reduced noise levels. Excellent electrical performance Tesla R2 Series PSUs feature excellent DC voltage regulation & ripple suppression; they can deliver their full-rated wattage continuously even with an intake temperature as high as 40°C (80% of maximum load at 50°C). SLI & Cross Fire X support Tesla R2 Series PSUs (650W & up) are tested & certified compatible with the latest graphics cards. Compliant with the latest standard Tesla R2 Series PSUs is compliant with the latest PC PSU standard: ATX12V 2.31. Silent, temperature-controlled 135mm fan Generally, larger fans move more air with less noise than smaller fans: Tesla R2 Series PSUs are equipped with a large, low-speed, 135 mm fan, which keeps noise level down. Single powerful 12V rail To provide maximum support for modern components, Tesla R2 Series PSUs deliver their full power from a single 12V rail. Extra-Long ATX12V cable Tesla R2 Series PSUs are equipped with a 700mm long 12V ("P4") connector cable, which accommodates bottom-mounted-PSU computer cases. Long-life Ball-bearing fan Tesla R2 Series PSUs are equipped with ball-bearing fans, which provide the longest expected fan life available on the market. General specifications Wattage range
- 500-1000W 80PLUS Certification
- Gold Modular cables
- No Fan type
- 135mm ball-bearing Maximum operating temperature at full load
- 40°C Semi-passive operation
- No Capacitors
- Taiwanese Colors Available
- Black, White Case

Dimensions
- W x H x D (mm)
- 150 x 86 x 165 Life expectancy (MTBF)
- 100, 000 hours at full load PSU

Specification compliance
- ATX 2.31 Package

Dimensions
- W x H x D (mm)
- 105 x 260 x 225 Warranty
- 3 Years






















...

Fractal Design TESLA R2 Series power supply units provide clean power efficiently & quietly. The TESLA R2 is an excellent choice for demanding high-end gaming computers & powerful workstations. The visual appearance of TESLA R2 Series PSUs is proof of Fractal Design’s commitment to providing innovative computer components infused with stylish, elegant, contemporary Scandinavian design. Key features 80PLUS Gold Single, powerful 12V rail SLI (650W & up) & Cross Fire X Certified Long-life ball-bearing fan 80 PLUS Gold certified efficiency Tesla R2 Series PSUs meet the 80 PLUS Gold

Specification for providing power with an efficiency that surpasses most power supplies available today. This efficiency produces positive environmental impact, as well as reduces electricity bills. in addition, because Tesla R2 PSUs generate less heat, they provide power at lower fan speeds, which results in reduced noise levels. Excellent electrical performance Tesla R2 Series PSUs feature excellent DC voltage regulation & ripple suppression; they can deliver their full-rated wattage continuously even with an intake temperature as high as 40°C (80% of maximum load at 50°C). SLI & Cross Fire X support Tesla R2 Series PSUs (650W & up) are tested & certified compatible with the latest graphics cards. Compliant with the latest standard Tesla R2 Series PSUs is compliant with the latest PC PSU standard: ATX12V 2.31. Silent, temperature-controlled 135mm fan Generally, larger fans move more air with less noise than smaller fans: Tesla R2 Series PSUs are equipped with a large, low-speed, 135 mm fan, which keeps noise level down. Single powerful 12V rail To provide maximum support for modern components, Tesla R2 Series PSUs deliver their full power from a single 12V rail. Extra-Long ATX12V cable Tesla R2 Series PSUs are equipped with a 700mm long 12V ("P4") connector cable, which accommodates bottom-mounted-PSU computer cases. Long-life Ball-bearing fan Tesla R2 Series PSUs are equipped with ball-bearing fans, which provide the longest expected fan life available on the market.

...

Fractal Design Venturi Hf-14 (140mm) Computer Cooling Fan The Venturi High Flow Series fans, HF-12 & HF-14, are optimized for low-restriction airflow environments, making them an excellent choice for computer case fans, or other low-restriction usage scenarios. Designed with a variety of performance-increasing & noise-reducing features, these fans can move an amazing amount of air compared to other fans at the same, minimal noise level. The HF-14 comes with two sets of solid vibration-dampening rubber corners: one for standard 140mm fan hole spacing (125mm) & one compatible with the standard 120mm hole spacing (105mm). The Venturi High Flow Series fans are ideal for those looking for a perfect balance between high performance & low noise built from sturdy, high quality materials. Key features Featuring true FDB-bearings, providing silent operation coupled with a long lifespan Equipped with a counter-balanced magnet that reduces the axial tension on the bearing Features integrated vibration-dampening corners, made from solid high-quality synthetic rubber Dense, sturdy construction, made from high-grade glass reinforced fiber reinforced thermoplasticpolymer Fan geometry is optimized for a ground-breaking airflow, perfect for low-restriction usage scenarios such as computer case ventilation & low-density heatsinks or radiators. Aerodynamically shaped thin stator struts reduce noise & unwanted turbulence Strategically placed notches on the blades further reduce & diffuse any humming noise produced when the blades pass the stator struts The trip wire technology introduces a micro-turbulent layer that combats elements that negatively affect performance, resulting in quieter operation Featuring a powerful motor to maintain a reliable speed & a low-speed adapter for reducing the speed without the use of a fan controller 140mm fans come with an additional set of vibration-dampening corners are included that lends compatibility with 120mm fan mounts (105mm screw spacing). This enables the use of 140mm fans on many CPU coolers. Available in 120mm & 140mm fan sizes Specifications Fan HF-14 Size [mm] 140*140*25mm Screw hole pattern 125*125mm 105*105mm Connector 3-pin fan header Bearing FDB Number of blades 11 Rotational speed [RPM] 1200 Acoustical noise [d B (A)] 26.5 Maximum air flow [CFM] 118.2 Maximum air flow [m 3 /h] 200.8 Maximum pressure [mm H 2 O] 0.95 Actual input power [W] 2.2 Maximum rated input current [A] 0.3 Nominal input voltage [V] 12V Minimum startup voltage [V] 4V Low speed adapter speed 850 RPM Low speed adapter Static pressure 0.59 mm H2O Low speed adapter Air flow 78.5 CFM 133.4 m 3/h Low speed adapter Noise level 18.3 d B (A) MTBF [hours] 150, 000 Unit weight [g] 202 Package weight [g] 260 Cable length [mm] 500 Cable type Braided all-black ribbon wire ...

Simple to install, silent operation, powerful performance & easy expandability define the Kelvin Series. The silent high-performance ceramic pump is strong enough to support considerable expansion, should you decide to include GPU blocks and/or additional radiators in the same loop. The Kelvin Series water cooling systems are constructed from enthusiast class components. Both the CPU block & the radiator are made from pure copper, for maximum performance & an increased product life span with zero maintenance required. All modern CPU sockets are supported by the versatile, easy-to-use mounting kit. Key features Fantastic cooling performance The strong pump & the full-copper construction places the Kelvin Series water cooling system ahead of the pack in cooling performance. Expandable system. Just open it up to get the full benefits of custom water cooling, with the ability to add any components you want to the loop, such as a graphics card cooler. High pressure pump allows strong water flow rates even when an additional CPU or GPU water block or an additional radiator has been added to the loop. All parts have fully standard G 1/4" thread fittings for compatibility with the vast majority of enthusiast water cooling products. The tubes are fastened with two-part brass fittings, providing a secure seal while being easy to open & re-seal with a standard wrench. Easy refilling with dedicated fill port Made with enthusiast-grade components developed in cooperation with Alphacool Highly reliable ceramic bearing pump, with custom tuned maximum RPM for the optimal balance between performance & noise level made with a revolutionary copper/nylon radiators Full copper CPU Water block design featuring strategic jet plate improvements Long lifetime. The performance of most pre-filled water cooling systems degrade quite significantly over time, because of galvanic corrosion & water loss. Galvanic corrosion occurs over time when two metals with different galvanic potential (such as aluminum & copper) are in contact. It can be slowed with anti-corrosion additives in the water, but the best way to maintain performance over time is to use metals with similar galvanic potential. The Kelvin Series water cooling system is constructed with pure copper in both the radiator & the water block, along with brass fittings. To avoid the common issue of most pre-filled water cooling units (that tend to lose performance over time due to water loss in the tubes), Fractal Design equipped the Kelvin series with a fill dedicated port. General Specifications Block/pump assembly measurements: 69*69*40 mm Tubing Measurements: 320mm long, 11mm outer & 8mm inner diameter Fitted with anti-kink coils for worry-free installation Kelvin T12 Radiator Measurements: 46*132*163 mm Thread class for fill port & all tube fittings: G 1/4" Supported sockets: Intel: 775, 1150, 1155, 1156, 1366, 2011; AMD: AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+ Fans included: 2 pcs Fractal Design Zero™ Thermal Paste ; 1 g syringe, sufficient for multiple mountings Colors Available: Black Net weight
- Base unit only, not including mounting or fans: 1.1kg Net weight
- SS-HP fan, per fan: 165 g Net weight
- Total excluding packaging & manual.

Includes:: fans, mounting kit for all platforms, cooling paste (including packaging for the cooling paste) & adapter cable: 1.7kg Package

Dimensions
- W x H x D: 350*250*151 mm Package weight: 2.4kg Fan Specifications Fractal Design Silent Series HP 120 mm 800
- 1700 RPM PWM control Max air flow: 62.4 CFM Max pressure: 2.33 mm H2O Acoustical noise: 26.9 d B (A) DC 12V, 0.18A Pump Specifications Ceramic bearing 2400 RPM Voltage control Maximum water flow: 72 l/h Maximum pressure: 1.0 m H2O Acoustical noise: 25.0 d B (A) DC 12V, 0.27A Package contents Fractal Design Kelvin T12 pre-assembled Water Cooling Unit 2 Fractal Design Silent Series HP PWM controlled fans Intel 775, 1150, 1155, 1156, 1366 mounting hardware (including back plate) Intel 2011 mounting hardware AMD AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+ mounting hardware PWM splitter cable Fractal Design Zero™ Thermal Paste, 1g Syringe Long & short radiator mounting screws User manual








...

France
- 25mm mle 1938 AA Gun
- Flames Of War. Ages: 14.

Includes:: three 25mm mle 1938 Anti-aircraft



...

France
- 47mm SA-37 Gun
- Flames Of War. Ages: 14. Available in far fewer quantities than the 25mm SA-34 Hotchkiss gun, the

...

France. 75mm mle 1897 Gun. Flames Of War. Ages: 14. With one 75mm mle 1897 gun (with spoked or rubber wheel options), one gun limber. one gun turntable. The 75mm mle 1897 gun was a superb piece of French engineering. It was the first gun in the world to combine a breech-loading mechanism with an effective recoil system. This quick-firing weapon made every other artillery piece obsolete. Despite being over forty years old, the soixante quinze. ...