The flexible interface cards support multiple integrated data, voice & video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solution The Cisco 1-port G.703 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1, fractional E1, & unstructured E1 (G.703) applications. To simplify remote management, the G.703 version

Includes:: a fully managed DSU. The G.703 versions also support all the capabilities on the T1/E1 versions.

...

The Cisco multimode VDSL2 & ADSL2+ EHWIC (EHWIC-VA-DSL) provides 1-port multimode VDSL2 & ADSL2+ WAN connectivity. This HWIC provides high-speed digital data transmission between customer premises equipment (CPE) & the central office (DSL access multiplexer), usually located on the telephone company premises. This capability enables service providers & resellers to offer additional services such as business-class security;voice, video, and data & ferentiated classes of service (Qo Ss). These value-added features provide the mission-critical networking features that businesses expect. Features One RJ-11 VDSL2 interface Dying gasp IEEE 802.1q VLAN tagging Independent DSL firmware loading Support for double-ended line testing (DELT) diagnostics mode DSL forum TR-067 compliance Reach-extended ADSL2 Annex L for increased performance on loop lengths greater than 16, 000 feet from central office Impulse noise protection (INP) & extended INP Downstream power back off (DPBO) Asynchronous transfer mode (ATM) ...

The Cisco multimode VDSL2 & ADSL2/ADSL2+ Enhanced high-speed WAN interface cards support DSL multimode, including very-high-speed VDSL2 & asymmetric ADSL2/ADSL2+. VDSL2 & ADSL2/ADSL2+ are supported on a single WAN interface, thus providing secure, cost-effective connectivity from small businesses to enterprise branch offices. This 1-port enhanced high-speed WAN interface card (EHWIC) supports multimode DSL over Plain Old Telephone System (POTS) & ISDN. The VDSL2 EHWIC provides 1-port multimode VDSL2 & ADSL2/ADSL2+ connectivity to a WAN. This EHWIC, combined with the Cisco Integrated Services Routers (ISRs), provide high-speed digital data transmission between customer premises equipment (CPE) & a central office. This type of deployment enables service providers & resellers to offer additional services by supporting features for business-class security; voice, video, & data integration; differentiated classes of service (Co S). ...

The Cisco Gigabit Ethernet Enhanced High-Speed WAN interface cards (EHWICs) can reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet (GE) switch ports. These low-density Gigabit Ethernet switches offer small to medium-sized business (SMB) & enterprise branch-office customers a combination of switching & routing integrated into a single device. The Gigabit Ethernet EHWICs provide line-rate Layer 2 switching across onboard Gigabit Ethernet ports. ...

Cisco
- SFP (mini-GBIC) transceiver module
- 1000 Base-LX, 1000 Base-LH
- LC/PC single mode
- plug-in module
- up




...

Cisco SFP+ Copper Twinax Cable
- Twinaxial cable
- SFP+
- SFP+
- 1 m
- for Catalyst 2960, 2960-24, 2960-48, 2960G-24,




...

The range of Cisco 10GBASE XENPAK modules offers customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, & service provider transport applications. Cisco 10GBASE XENPAK modules provide flexibility of interface choice & support 10GBASE Ethernet. These hot-swappable input/output devices plug into an Ethernet XENPAK port of a Cisco switch or router to link the port with the network & support the Cisco quality identification (ID) feature that enables a Cisco switch or router to identify whether the module is a Cisco certified & tested XENPAK module. Cisco 10GBASE XENPAK modules also support pay-as-you-populate model. ...

Cisco 10GBASE-SR XFP module for MMF The 10GBASE-SR XFP is dedicated to Ethernet applications only. It supports a link length of 26m on standard FDDI-grade MMF. Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3). Up to 400m link lengths are possible when using 4700 M Hz*km MMF (OM4). Features Supports 10GBASE Ethernet & OC-192/STM-64 data rates Hot-swappable input/output device plugs into a XFP port of a Cisco Systems router to link the port with the network Provides flexibility of interface choice Supports “pay-as-you-populate” model Supports the digital optical monitoring capability Supports the Cisco quality identification (ID) feature that helps enable a Cisco switch or router to identify whether the module is a Cisco certified & tested XFP Supports optical interoperability with respective Cisco 10GBASE XENPAK & X2, & SFP+ modules on the same link ...

The PVDM3 provides higher density & more processing power than the PVDM2, making the addition of rich-media applications possible. Enhanced DSP architecture accommodates a packet-processing engine optimized for rich-media voice & video applications, while concurrently supporting the time-division multiplexing IP (TDM-IP) voice framework used by the PVDM2. The PVDM3 module portfolio has up to 4 times higher density than those in the PVDM2 portfolio. In addition, the PVDM3 modules provide better density for medium- & high-complexity codecs than their equivalent PVDM2 peers. For example, the number of supported medium-complexity codec on a PVDM3-64 is 42, versus 32 on a PVDM2-64. Features High density & flexibility The PVDM3 module portfolio has up to 4 times higher density than those in the PVDM2 portfolio. In addition, the PVDM3 modules provide better density for medium- & high-complexity codecs than their equivalent PVDM2 peers. For example, the number of supported medium-complexity codec on a PVDM3-64 is 42, versus 32 on a PVDM2-64. Voice-quality management The PVDM3 modules perform compression, voice-activity-detection, jitter-management, and echo-cancellation functions. The echo cancellation offered in the PVDM3 modules has a tail length of 128 milliseconds (ms) & complies with ITU-T G.168. Energy-saving feature The PVDM3 DSPs offer multiple power-saving modes, including a power-saver mode when the module is not in use. In power-saver mode each PVDM3 can save up to 5 watts of power. ...

Cisco
- Power cable
- 12.2 m
- Europe
- for Aironet 1522AG Lightweight Outdoor Mesh Access Point, 1524

Specification





...