The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet & Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications. The multirate XFP supports both 10GBASE-ER Ethernet applications & OC-192/STM-64 long-reach (IR-2) POS applications. ...

The Cisco 10GBASE X2 modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 & OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3. For additional information on mode conditioning patch cord requirements Features Hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the port with the network Provides flexibility of interface choice Supports “pay-as-you-populate” model Supports the Cisco quality identification (ID) feature that enables a Cisco switch or router to identify whether the module is certified & tested by Cisco Has optical interoperability with respective 10GBASE Xenpak, 10GBASE XFP & 10GBASE SFP+ modules on the same link

Specification Device Type X2 transceiver module
- SC/ PC Form Factor Plug-in module Cabling Type 10 G Base-LRM Data Transfer Rate 10 Gbps Optical Wave Length 1310 nm Data Link Protocol 10 Gigabit Ethernet Max Transfer Distance 300 m

Dimensions (Wx Dx H) 3.6 cm x 9.1 cm x 1.3 cm Weight 300 g Manufacturer Warranty 90 days warranty




...

The flexible interface cards support multiple integrated data, voice & video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solution The Cisco 1-port G.703 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1, fractional E1, & unstructured E1 (G.703) applications. To simplify remote management, the G.703 version

Includes:: a fully managed DSU. The G.703 versions also support all the capabilities on the T1/E1 versions.

...

The Cisco multimode VDSL2 & ADSL2+ EHWIC (EHWIC-VA-DSL) provides 1-port multimode VDSL2 & ADSL2+ WAN connectivity. This HWIC provides high-speed digital data transmission between customer premises equipment (CPE) & the central office (DSL access multiplexer), usually located on the telephone company premises. This capability enables service providers & resellers to offer additional services such as business-class security;voice, video, and data & ferentiated classes of service (Qo Ss). These value-added features provide the mission-critical networking features that businesses expect. Features One RJ-11 VDSL2 interface Dying gasp IEEE 802.1q VLAN tagging Independent DSL firmware loading Support for double-ended line testing (DELT) diagnostics mode DSL forum TR-067 compliance Reach-extended ADSL2 Annex L for increased performance on loop lengths greater than 16, 000 feet from central office Impulse noise protection (INP) & extended INP Downstream power back off (DPBO) Asynchronous transfer mode (ATM) ...

The Cisco multimode VDSL2 & ADSL2/ADSL2+ Enhanced high-speed WAN interface cards support DSL multimode, including very-high-speed VDSL2 & asymmetric ADSL2/ADSL2+. VDSL2 & ADSL2/ADSL2+ are supported on a single WAN interface, thus providing secure, cost-effective connectivity from small businesses to enterprise branch offices. This 1-port enhanced high-speed WAN interface card (EHWIC) supports multimode DSL over Plain Old Telephone System (POTS) & ISDN. The VDSL2 EHWIC provides 1-port multimode VDSL2 & ADSL2/ADSL2+ connectivity to a WAN. This EHWIC, combined with the Cisco Integrated Services Routers (ISRs), provide high-speed digital data transmission between customer premises equipment (CPE) & a central office. This type of deployment enables service providers & resellers to offer additional services by supporting features for business-class security; voice, video, & data integration; differentiated classes of service (Co S). ...

Cisco
- SFP (mini-GBIC) transceiver module
- 1000 Base-LX, 1000 Base-LH
- LC/PC single mode
- plug-in module
- up




...

Cisco Rugged SFP
- SFP (mini-GBIC) transceiver module
- LC multi-mode
- up to 2 km
- 1310 nm
- for Aironet 1522; Catalyst




...

Cisco SFP+ Copper Twinax Cable
- Twinaxial cable
- SFP+
- SFP+
- 1 m
- for Catalyst 2960, 2960-24, 2960-48, 2960G-24,




...

The range of Cisco 10GBASE XENPAK modules offers customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, & service provider transport applications. Cisco 10GBASE XENPAK modules provide flexibility of interface choice & support 10GBASE Ethernet. These hot-swappable input/output devices plug into an Ethernet XENPAK port of a Cisco switch or router to link the port with the network & support the Cisco quality identification (ID) feature that enables a Cisco switch or router to identify whether the module is a Cisco certified & tested XENPAK module. Cisco 10GBASE XENPAK modules also support pay-as-you-populate model. ...

Cisco 10GBASE-SR XFP module for MMF The 10GBASE-SR XFP is dedicated to Ethernet applications only. It supports a link length of 26m on standard FDDI-grade MMF. Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3). Up to 400m link lengths are possible when using 4700 M Hz*km MMF (OM4). Features Supports 10GBASE Ethernet & OC-192/STM-64 data rates Hot-swappable input/output device plugs into a XFP port of a Cisco Systems router to link the port with the network Provides flexibility of interface choice Supports “pay-as-you-populate” model Supports the digital optical monitoring capability Supports the Cisco quality identification (ID) feature that helps enable a Cisco switch or router to identify whether the module is a Cisco certified & tested XFP Supports optical interoperability with respective Cisco 10GBASE XENPAK & X2, & SFP+ modules on the same link ...