Equipped with newly designed internal shock mounting for reduced handling & stage noise, this cardioid dynamic workhorse is designed for smooth, natural vocal reproduction. The microphone features super-durable construction for long-lasting performance, a rare-earth magnet for high output, & a multi-stage grille design for excellent protection against plosives. Its cardioid polar pattern reduces pickup of sounds from the sides & rear, maximizing isolation from other sound sources & minimizing feedback. Features Newly designed superior internal shock mounting reduces handling & stage noise Tailored for smooth, natural vocal reproduction Cardioid polar pattern reduces pickup of sounds from the sides & rear, improving isolation of desired sound source Durable performance for professional applications Rare-earth magnet for enhanced output & transient response Excellent off-axis rejection for minimum feedback Multi-stage grille design offers excellent protection against plosives & sibilance without compromising high-frequency clarity Quiet-Flex stand clamp provides silent, flexible microphone positioning Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged, all-metal design & construction for years of trouble-free use ...

The Audio-Technica AT829c W is a cardioid lavalier microphone terminated with a locking 4-pin connector. The microphone is intended for use with A-T Uni Pak body-pack wireless transmitters. The microphone cable measures 55" in length (1.4 m). Miniature unobtrusive profile Cardioid polar pattern rejects off-axis signal & feedback 55" cable terminated for use with Uni Pak transmitters Transducer
- Condenser Polar Pattern
- Cardioid Cable
- 55" (1.4m), terminated for use with Uni Pak transmitters


...

This double-gooseneck cardioid condenser microphone with integral power module & 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship & other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphone's self-contained electronics eliminate need for external power modules. Available in two lengths: 15.79" (PRO47TL) & 12.40" (PRO47T). Features Wide-range condenser element with low-mass diaphragm for superior performance Self-contained electronics eliminate need for external power modules Flat, smooth frequency response Quiet, fixed-placement, long-life gooseneck Direct mounts to any 5/8"-27 st&, or to included threaded mounting stud 9.8' (3.0 m) cable permanently attached between microphone & XLRM-type connector Overall length of 15.79" (401.0 mm) Also available in a 12.40" (315.0 mm)-long version as PRO47T ...

This low-profile cardioid condenser boundary microphone is recommended for unobtrusive table-, ceiling-, or panel-mount applications in high-quality sound reinforcement, professional recording & teleconferencing. Designed for permanent installation, the microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a cardioid pattern for enhanced gain before feedback & enhanced signal-to-noise ratio. It is available in two
Colours: black (ES947) & white (ES947W). Features Designed for surface-mount applications such as high-quality sound reinforcement, professional recording & teleconferencing Low-profile element provides uniform cardioid polar pattern with 120 degrees acceptance angle Mounts unobtrusively in table-tops, ceilings & wall panels Self-contained power module with XLRM-type output connector Rugged all-metal case with a two-layer steel mesh grille Isolators provide mechanical dampening of mounting-surface vibration Requires 11V to 52V DC phantom power Uni Guard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI) Available in two
Colours: black (ES947) & white (ES947W) Ro HS compliant-free from all substances specified in the EU directive on hazardous substances

...

This low-profile cardioid condenser boundary microphone is recommended for unobtrusive table-, ceiling-, or panel-mount applications in high-quality sound reinforcement, professional recording & teleconferencing. Designed for permanent installation, the microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a cardioid pattern for enhanced gain before feedback & enhanced signal-to-noise ratio. It is available in two
Colours: black (ES947) & white (ES947W). Features Designed for surface-mount applications such as high-quality sound reinforcement, professional recording & teleconferencing Low-profile element provides uniform cardioid polar pattern with 120 degrees acceptance angle Mounts unobtrusively in table-tops, ceilings & wall panels Self-contained power module with XLRM-type output connector Rugged all-metal case with a two-layer steel mesh grille Isolators provide mechanical dampening of mounting-surface vibration Requires 11V to 52V DC phantom power Uni Guard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI) Available in two
Colours: black (ES947) & white (ES947W) Ro HS compliant—free from all substances specified in the EU directive on hazardous substances

...

The Audio-Technica ATW-2110a Wireless UHF Body-Pack Microphone System bridges the gap between affordable wireless technology & professional level quality. The system

Includes:: the ATW-T210 Uni Pak body-pack transmitter & ATW-R2100 diversity UHF receiver. The ATW-R2100 receiver features True Diversity operation which selects between two receiver sections, reducing dropouts & radio frequency interference. The receiver features 10 user selectable UHF frequencies, allowing 10 systems to be used simultaneously. Single touch frequency scanning automatically selects clear frequencies in the area. The rear panel features a balanced XLR output & unbalanced 1/4" phone connection. A back-lit LCD provides channel, AF, RF & diversity status information. The ATW-T210 Uni Pak transmitter is a lightweight body-pack microphone transmitter that operates on the same frequencies as the receiver. The transmitter features a 4-pin Hirose connection input that is compatible with Audio-Technica "CW" lavaliers & head worn microphones, & select instrument cables. The transmitter operates up to 9 hours on two 1.5V AA batteries. Serious advances in affordable professional wireless Clear sound quality & rock-solid, dependable performance Automatic frequency scanning 10 compatible user-switchable channels in one of two UHF frequency ranges Antenna power available for powered antennas & other in-line RF devices True Diversity operation selects the better signal from the two receiver sections, reducing dropouts Tone Lock tone squelch system fights interference Rugged metal half-rack receiver with soft-touch controls & LCD display Balanced XLR & unbalanced 1/4" output jacks enable use with a wide variety of audio gear Switchable transmitter power output with high & low settings offered Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system & receiver ATW-T220a Handheld Microphone/ Transmitter features PRO 41 Capsule for maximum feedback rejection & consistent sound System
- Type of System
- UHF Frequency Agile Diversity RF Carrier Frequency Range
- Band D: 656.125 to 678.500 M Hz Approx. Working Range
- 300 typical (100m) Overall Frequency Response
- 100 Hz to 15k Hz THD & Noise
- < 1% (at 1 k Hz, ±20 k Hz deviation) Of Channels
- 10 Total Receiver
- Of Simultaneous Systems
- 10 Type of Receiver
- ATW-R2100 UHF Diversity Half-Rack Mount Type of Outputs
- Balanced: XLR-male Unbalanced
- 1/4" Phone Headphone Monitoring
- No Power Requirements
- 12-18V DC, 500 m A Battery Type/ Approx. Life
- AC Power Only Antenna Type
- Wide Band Diversity

Dimensions (Wx Dx H)
- 8.27 x 6.39 x 1.73" (210 x 162.2 x 44mm) Weight
- 2.20 lbs (1.0kg) Transmitter
- Type of Transmitter
- ATW-T210 Uni Pak UHF Body-Pack Transmitter Type of Input Connector
- 4-pin Hirose connection Type of Microphone
- Wireless Essentials microphones & cables sold separately Interchangeable Mic Heads
- Compatible with Audio-Technica Wireless Essentials microphones / instrument cables featuring 4-pin Hirose connections Battery Type/ Approx. Life
- Two 1.5V AA alkaline Mute Switch
- Off/ On Switch Level Control
- Instrument / Microphone Level Trim Controls Antenna Type
- Replaceable 1/4 wave whip antenna Display
- LED Battery Indicator

Dimensions (Wx Dx H) 2.60 x 0.89 x 3.63" (66 x 22.5 x 92.3) Weight 2.9 oz (81 grams)

































...

Audio-Technica’s third-generation 3000b Series wireless systems offer up to 1001 selectable UHF frequencies & new features for clear sound & intuitive operation. We’ve simplified selection of usable frequencies, increased system reliability, & illuminated transmitter screens for clear reads on dark stages. It all adds up to the luxury of rock-solid, richly detailed high-fidelity sound. The 3000b Series is designed for a wide range of applications including live performance, fixed installation, public address, & houses of worship. The new ATW-R3100b receiver benefits from a newly designed high

Specification front end filtering system, dual independent diversity along with the latest Audio Technica 1/2 wave antenna technology (depending on frequency band) to maximise both simultaneous frequency use & range. The 12VDC bias voltage on both BNC antenna inputs allows operation with the ATW-B80 antenna booster or other active components. The new frequency scan function enables automatic assignment of clear open channel selection. Al components in the new 3000b Series have soft-touch controls for quick, easy access to the most important functions during set-up & operation. The system is compatible with the entire line of Wireless Essentials mics & cables. Features 953
- 1001 UHF frequencies in one of six UHF frequency ranges Antenna power available for powered antennas & other in-line RF devices Nine pre-coordinated frequency scan groups simplify selection of usable frequencies in a multi-channel wireless system True Diversity operation reduces dropouts Advanced digital Tone Lock squelch effectively blocks stray RF & communicates transmitter data for receiver display Transmitters offer backlit LCD & dual-color LED Locking battery compartment with secure latch & robust design Ground-lift switch helps eliminate audible hum caused by ground loops Balanced & unbalanced audio output jacks ATW-T310b Uni Pak transmitter

Includes:: Super Hi-Z input that provides optimum load for guitar pickups AT829CW Terminated with locking 4-pin connector for A-T Uni Pak body-pack wireless transmitters. 55" (1.4 m) cable Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 70-16, 000 Hz Open Circuit Sensitivity: -42.8 d BV (7.3m V) re 1V at 1 Pa Signal to Noise Ratio: 67.1 d BA, 1 k Hz at 1 Pa Weight: 2.4g Dimensions: 24mm long, 10.5mm diameter Cable: 1.4 m long (permanently attached to microphone), terminated with HRS connector Accessories: AT8131 foam windscreen; AT8434 clothing clip;




...

Belkin
- Audio cable
- RCA phono x 2 (M)
- RCA phono x 2 (M)
- 2 m
- double shielded The Belkin Stereo Audio Cable




...

This Mini-Stereo Audio Cable connects portable audio equipment with mini-stereo jacks, including portable CD players, tape players, CD sound cards, & multimedia speakers. Simply connect each end of your cable to the mini-stereo jacks of your portable audio components.

Specification Cable length: 1 m Gender type: male/male Colour of product: Black Connector 1: 3.5mm Connector 2: 3.5mm Connector contacts plating: Nickel

...

Designed for professional recording camcorder & DAT field use it is an affordable high-quality stereo microphone with a compact lightweight design & is perfect for camera-mount use. The microphone features a pair of cardioid elements in an X-Y configuration to provide the spatial impact & realism of a live sound field. It features battery-free operation when used with recording devices that provide plug-in power at the mic input. ...