The ARCTIC F TC is a temperature controlled case fan, keeping your computer temperature at optimal level without any further setup or monitoring. No Setup Needed
- It Simply Works The ARCTIC F TC controls its speed by itself. Thanks to the temperature sensor, all you need to do is to install the fan. No further adjustments or setup is required. The fan controller is set to keep the temperature between 32°C & 38°C. When the temperature is below 32°C, the fan spins slowly & silently. If the temperature continues to rise, the fan speed will increase to deliver maximum airflow, & in turn cooling the PC more efficiently. Efficient cooling Equipped with nine blades to efficiently create high airflow & static pressure, the ARCTIC F TC fan is perfect for PC case ventilation. in addition, the fluid dynamic bearing extends the service life of the fan. Optimal Flexibility The temperature sensor of the fan is installed on a 40cm cable. This gives you great flexibility to install the sensor in a spot that emits most heat. Ideally the sensor is installed at the top of the PC case, since the temperature is highest in this area. Also the fan can be installed as either as intake or out take.
...

The ARCTIC F Series is a high performance case fan for anyone looking for a quiet & efficient case fan. Perfectly Quiet The refined "ninja-knife" impeller design not only improves the airflow, but it also lowers the noise level significantly. The ARCTIC F Series fans remain inaudible even while running at full speed. Impressive Airflow The special fan blades reinforce the volume of airflow by 20% comparing with those generic fans. Multi-Purpose Fan The ARCTIC F Series have a standard frame, making it possible to install the fans either in-taking or out-taking air in the PC case. The standard three-pin connector can easily be connected directly to mainboards. ...

The compact-sized Freezer 11 LP brings low noise cooling into low profile & HTPC Systems. With a height of 53 mm only, the cooler squeezes into even the tiniest PC cases. Compact & Lightweight With

Dimensions of 115 (L) x 106 (W) x 53 (H) mm, having a weight of only 255 g, the Freezer 11 LP is extremely compact. It fits virtually into any low profile PC case & is the ideal choice for any HTPC system. Reliable Cooling Performance Equipped with an ultra-quiet 92 mm PWM fan & two copper heatpipes, the Freezer 11 LP offers a maximum cooling capacity of 100 Watts. The dual high performance 6 mm heatpipes efficiently dissipate the heat from the CPU into the block consisting of 50 aluminum fins. Heatpipe
- ˜ 6 mm x 2 Heatsink Material
- Aluminum fins x 50, thickness: 0.3 mm Fan (mm)
- 92 Bearing
- Fluid Dynamic Bearing Noise Level
- 0.3 Sone Current, Voltage
- 0.13A, 3.8
- 12V Rated Fan Speed
- 900
- 2, 000 RPM, (PWM) Gross Weight
- 0.4kg











...

The Freezer 13 carries the legacy of the renowned Freezer 7 Pro Rev.2. With all together 8 high-performance heatpipes the cooler brings 200 Watts cooling performance – enough to cool down every current CPU. While doing so it is extremely silent. Superior Cooling Capacity With detailed engineering design, the Freezer 13 comprises of four U-shaped high performance heatpipes & 45 efficiently formed aluminum fins. The maximum cooling capacity for this cooler is 200W & is able to dissipate massive heat that is produced in high-end CPUS, such as Intel Core i 7. Ultra Quiet Operated with a 92mm PWM fan, the entire running operation remains whisper quiet, even at full load. The fan speed normally runs from 600 to 2000 RPM, which is sufficient to maintain your CPU at ideal temperature. Multi Compatibility The Freezer 13 features wide compatibility with AMD & Intel sockets. Its simple mounting system is designed to fit all current CPU platforms which makes this cooler to have a broad usability & brings overclocking to a new level Easy Installation The unique mounting system via push pins offers excellent stability & is applicable within seconds. The pre-applied ARCTIC MX-4 thermal compound makes the installation a quick & clean process. Compatible Sockets Intel Socket 1366, 1156, 1155, 775 AMD Socket FM2+, FM2, FM1, AM3+. AM3, AM2+, AM2, 939, 754 Specifications Fan (mm)
- 92 Noise Level (Sone)
- 0.5 Cooling Capacity (Watts)
- 200 Rated Fan Speed
- 600
- 2000 RPM, (PWM Controlled) Airflow
- 36, 4 CFM / 61.8 m&sup 3;/h





...

Compatible with Intel Core i 7 & Core i 5, as well as AMD sockets Excellent cooling performance
- 130 Watts Ultra quiet 92mm PWM
...

The Freezer i 30 is an enthusiast-grade CPU cooler for the latest Intel socket 2011, as well as socket 1155 & 1156. Patented technologies, direct touch heatpipes, precision machining, a fan vibration absorption & a brand new mounting system offers you plenty of overclocking headroom at a minimal noise level. Direct Touch Heatpipe Heatsink The Freezer i 30 heatsink consists of 4 double-sided direct touch heatpipes, 8mm in diameter. A patented process (20 2011 000 71.8) allows us to pack the heatpipes without gaps & thus increase the contact surface & achieve better flatness by precision machining “ both leading to an enhanced heat transfer. Efficient Heat Dissipation As a combined result of the 4 direct touch heatpipes, 48 Aluminum fins, an interchangeable 120 mm PWM Fan (ARCTIC F12 PWM), & the famous ARCTIC MX-4 thermal compound (included), the Freezer i 30 offers superior cooling performance with a maximum cooling capacity of 320 Watts & lots of headroom for overclocking. Max. Cooling Capacity
- 320 Watts Heatpipe
- Direct-Touch ˜ 8 mm x 4 (double-sided) Heatsink Material
- Aluminum fins x 48, thickness: 0.5 mm Fan (mm)
- ARCTIC F12 PWM: 120 mm, 400 “ 1, 350 RPM (PWM controlled) Airflow
- 74 CFM / 125.7 m&sup 3;/h Bearing
- Fluid Dynamic Bearing Noise Level
- 0.3 Sone (@1, 350 RPM) Current, Voltage
- 0.22A / 3.5
- 12V

Dimensions (Product)
- 100 (L) x 139 (W) x 161 (H) mm Net Weight
- 0.9kg












...

Super Quiet Twin-Tower Cooler Powerful Enough for Any CPU Excellent Cooling Performance The unique heatsink design consisting of 102 fins & 4 double-sided heatpipes offers excellent cooling performance & improve heat transfer from the CPU. Tested by Hinnavaatlus, the Freezer Xtreme outperformed the stock cooler in reducing the CPU temperature by 18 degrees. Low Noise Complimented by Hardware Secrets for being the quietest cooler ever tested, the Freezer Xtreme features a central-mounted 120 mm fan with low noise impeller & patented fan holder to achieve quiet operation. Thanks to the PWM control, the fan speed adjusts according to the CPU temperature & thus the noise level remains at an absolute minimum which qualifies it as a silent cooler. Click here to see how the PWM control settings can be changed according to your performance & noise preference. Specifications Compatibility Intel Socket 1366, 1150, 1155, 1156, 775 AMD Socket FM2+, FM1, AM3+, AM2+, 939, 754 Max. Cooling Performance 160 Watts Heatsink Heatpipes & Oslash; 6 mm x 4 Aluminum Fins x 102 (Thickness: 0.3 mm) Fan Diameter: 120 mm Fan Speed: 800
- 1, 500 RPM (Controlled by PWM) Noise Level: 0.5 Sone @ 1, 500 RPM Current / Voltage (per fan) 0.19 A / 3.8
- 12 V Power Consumption: 2.64 Watts Size & Weight Dimensions: 132 (L) x 100 (W) x 145 (H) mm Net Weight: 608 g

...

MX-2 is a high thermal conductivity & low thermal resistance compound for components that require optimum thermal dissipation. It is ideally suited for use in CPU, GPU cooling & other applications between power semiconductor components & heat sinks where thermal conductivity is a major factor. Since the MX-2 does not contain any metal particles, there are no problems regarding electrical conductivity or capacitance. Unlike other silver & copper compounds, MX-2 ensures that contact to electrical traces, pins & leads cannot result in any damage. With MX-2 no curing & no bleeding of the compound are possible. In contrast to other products, this compound does not show decreasing performance over time, does not need to be reapplied & has a durability of at least 8 years. Viscosity (poise) 850 Density (g/cm&sup 3;) 3.96 UPC 1.5g: 0872767004832 4g: 0872767002081 8g: 0872767003774 30g: 0872767002227 65g: 0872767003170

Dimensions (Packaging) 4g: 160 L x 110 W x 20 H mm Net Weight 30g itemnumber ORACO-MX20001-BL UPC Gross Weight 0.13kg

...

ARCTIC MX-2 is the thermal compound offering high thermal conductivity & low thermal resistance to dissipate heat efficiently from CPU / GPU to the installed heatsink. Excellent Performance The ARCTIC MX-2 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat from the CPU or GPU can be dissipated quickly & efficiently. With its performance, the ARCTIC MX-2 outperforms other well-known thermal compounds in the market. Safe & Easy Application As the ARCTIC MX-2 does not contain any metallic particles so electrical conductivity will not be an issue. Unlike other silver & copper compounds, the ARCTIC MX-2 ensures that contact with any electrical pins would not result in any sort of damage. Moreover the ARCTIC MX-2 is very easy to apply as it has ideal consistency. High Durability In contrast to metal & silicon thermal compound, the ARCTIC MX-2 does not show decreasing performance over time. It does not need to be re-applied & has a durability of at least eight years. ...

Easy to Apply With an ideal consistency, the MX-2 thermal compound is very easy to use, even for beginners Excellent Performance The ARCTIC MX-2 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated quickly & efficiently, even suitable for overclocking. superb in performance, MX-2 ranks among the top thermal compound, thermal paste or thermal grease in the market. Safe Application It does not contain any metallic particles so electrical conductivity would not be an issue. Unlike silver & copper compound, it ensures that contact with any electrical pins would not result in damage of any sort. High Durability In contrast to metal & silicon thermal compound, the performance of MX-2 does not compromise over time. Once applied, you do not need to apply it a second time as it will last over 8 years. ...