Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a "back door" such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. ...

Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a "back door" such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: direct contact between components & power or lightning circuits, static charge buildup on cables & component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) & potential differences (even from building to building, between safety grounds to which components are connected.) ...

Network AIR Rack-Mount Series. The " Network AIR Air Distribution Unit" is a unique 2U rack-mounted fan tray product that works with an existing precision air conditioning system to deliver cool air to the equipment contained in a rack enclosure. High-density equipment creates an environment where traditional air distribution methods are often not effective. Densely packed enclosures can cause IT equipment to overheat, resulting in downtime. The Rack Air Removal Unit SX captures exhaust heat, returns the warm air to the plenum & eliminates hot spots from the data center. Through automatic fan speed control based upon temperature, the fans will self-adjust for optimal performance. With a unit-mounted LCD display, users can view temperatures at the rack, monitor alarm conditions & adjust unit set points. The integrated network management card allows for remote monitoring & control. This space-saving solution mounts to the back of either the Net Shelter SX or VX enclosure, requiring zero U space.
Includes:: Documentation CD, Installation guide, Operations & maintenance manual Standard Lead Time: Usually in Stock
...

APC Rack Automatic Transfer Switch (Rack ATS) provides reliable, redundant rack mount power to single-corded equipment. The Rack ATS has dual input power cords supplying power to the connected load. If the primary power source becomes unavailable, the Rack ATS will seamlessly source power from the secondary source without interrupting critical loads. The Rack ATS has built-in network connectivity, which allows for remote management via web, SNMP, or Telnet interfaces. ...

Cable management accessory to help eliminate cable stress & maintain a neat, organized cable layout within an enclosure or a rack. ...

APC Metered Rack Power Distribution Units (PDUs) provide power distribution as well as equip on-site installers with the ability to monitor the aggregate current draw as equipment is connected to the unit. These Metered Rack PDUs also have alarm thresholds that, when exceeded, alert users to potential problems. These features help eliminate the possibility of an overloaded circuit. ...

APC Metered Rack Power Distribution Units (PDUs) provide advanced warning to protect against unplanned power overloads. User-defined alarm thresholds mitigate risk with real-time local & remote alerts of potential unexpected circuit overloads to your mission critical equipment. Metered rack PDUs provide power utilization trends allowing Data Center Managers to make informed decisions on right sizing IT environments to lower total cost of ownership. Users can access & configure Metered rack PDUs through secure Web, SNMP, or Telnet Interfaces. ...

APC Metered Rack Power Distribution Units (PDUs) provide advanced warning to protect against unplanned power overloads. User-defined alarm thresholds mitigate risk with real-time local & remote alerts of potential unexpected circuit overloads to your mission critical equipment. Metered rack PDUs provide power utilization trends allowing Data Center Managers to make informed decisions on right sizing IT environments to lower total cost of ownership. Users can access & configure Metered rack PDUs through secure Web, SNMP, or Telnet Interfaces. ...

APC AP8853 Rack PDU 2G, Metered, Zero U, 32A, 230V, (36) C13 & (6) C19 Key Features Nominal Output Voltage
- 230V Maximum
...

Rack PDU 2G, Switched, Zero U, 16A, 230V, (21) C13 & (3) C19, IEC309 Cord APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control & active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment & restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, & low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces & is complimented by APC Centralized Management platforms using Infra Struxure Central, Capacity Manager & Change Manager. Availability Network Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements. Remote Individual Outlet Control Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime & avoid travel time to equipment). Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network & visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability) Local Current Monitoring Display The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only) Power Delays Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits & dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. Load indicator LED Indicates overload & warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. Flash Upgradeable Quickly & easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only) Integrates with Struxure Ware Data Center Expert An IT-ready, scalable access monitoring system that collects, organizes, & distributes critical alerts, surveillance video & key information, providing a unified view of complex physical infrastructure environments from anywhere on the network Agility Rack-Mountable

Includes:: horizontal, vertical, & toolless-mount varieties. Puts power where it is needed most
- in the racks near the equipment. Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections. Wide range of input & output connections Product family

Includes:: a variety of input & output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs & outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4k W using a single branch whip.
Includes:: All required connectors, Battery recycling guide, Installation guide, Reusable packaging





...