Data line surges make up an overwhelming majority of all surge-induced damages where the equipment was thought to be already protected but had a back door such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: direct contact between components & power or lightning circuits, static charge buildup on cables & component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) & potential differences (even from building to building, between safety grounds to which components are connected). ...

Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a "back door" such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. ...

Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a "back door" such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: direct contact between components & power or lightning circuits, static charge buildup on cables & component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) & potential differences (even from building to building, between safety grounds to which components are connected.) ...

Network AIR Rack-Mount Series. The " Network AIR Air Distribution Unit" is a unique 2U rack-mounted fan tray product that works with an existing precision air conditioning system to deliver cool air to the equipment contained in a rack enclosure. High-density equipment creates an environment where traditional air distribution methods are often not effective. Densely packed enclosures can cause IT equipment to overheat, resulting in downtime. The Rack Air Removal Unit SX captures exhaust heat, returns the warm air to the plenum & eliminates hot spots from the data center. Through automatic fan speed control based upon temperature, the fans will self-adjust for optimal performance. With a unit-mounted LCD display, users can view temperatures at the rack, monitor alarm conditions & adjust unit set points. The integrated network management card allows for remote monitoring & control. This space-saving solution mounts to the back of either the Net Shelter SX or VX enclosure, requiring zero U space.
Includes:: Documentation CD, Installation guide, Operations & maintenance manual Standard Lead Time: Usually in Stock
...

APC Rack Automatic Transfer Switch (Rack ATS) provides reliable, redundant rack mount power to single-corded equipment. The Rack ATS has dual input power cords supplying power to the connected load. If the primary power source becomes unavailable, the Rack ATS will seamlessly source power from the secondary source without interrupting critical loads. The Rack ATS has built-in network connectivity, which allows for remote management via web, SNMP, or Telnet interfaces. ...

APC Metered by Outlet Rack Power Distribution Units (PDUs) provide individual outlet power metering to enable energy optimization & circuit protection. Current metering provides real-time remote monitoring of connected loads. Metered by Outlet Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing & right sizing IT environments to lower total cost of ownership. Metered by Outlet Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, & ultra low profile circuit breakers. Users can access & configure Metered by Outlet Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using Infra Struxure Central, Operations, Capacity, & Energy Efficiency. ...

APC Metered Rack Power Distribution Units (PDUs) provide power distribution as well as equip on-site installers with the ability to monitor the aggregate current draw as equipment is connected to the unit. These Metered Rack PDUs also have alarm thresholds that, when exceeded, alert users to potential problems. These features help eliminate the possibility of an overloaded circuit. ...

APC Metered Rack Power Distribution Units (PDUs) provide advanced warning to protect against unplanned power overloads. User-defined alarm thresholds mitigate risk with real-time local & remote alerts of potential unexpected circuit overloads to your mission critical equipment. Metered rack PDUs provide power utilization trends allowing Data Center Managers to make informed decisions on right sizing IT environments to lower total cost of ownership. Users can access & configure Metered rack PDUs through secure Web, SNMP, or Telnet Interfaces. ...

APC Metered Rack Power Distribution Units (PDUs) provide advanced warning to protect against unplanned power overloads. User-defined alarm thresholds mitigate risk with real-time local & remote alerts of potential unexpected circuit overloads to your mission critical equipment. Metered rack PDUs provide power utilization trends allowing Data Center Managers to make informed decisions on right sizing IT environments to lower total cost of ownership. Users can access & configure Metered rack PDUs through secure Web, SNMP, or Telnet Interfaces. ...

APC AP8853 Rack PDU 2G, Metered, Zero U, 32A, 230V, (36) C13 & (6) C19 Key Features Nominal Output Voltage
- 230V Maximum
...